프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

XipFax

제작자: xipfax.com버전 1.0.0i★ –i클라우드에서 실행
레지스트리 이름com.xipfax/fax

설치

개요

제작자가 쓴 설명(영어 원문)

Fax a form from your AI assistant. XipFax finds the right IRS fax number and shows the price first.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://mcp.xipfax.com/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http fax https://mcp.xipfax.com/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "fax": {
      "url": "https://mcp.xipfax.com/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "fax": {
      "type": "http",
      "url": "https://mcp.xipfax.com/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://mcp.xipfax.com/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • find_fax_number

    Finds the fax number of the IRS office that takes a form or a notice, from XipFax’s list of offices, read from the IRS’s own pages. Give the form or the notice by its name or number alone, such as Form 2848, SS-4 or CP2000. Where the IRS gives a number for each state, give the pl

  • quote_fax

    The price of sending one fax of a number of pages with XipFax, without a plan, from XipFax’s price list.

  • send_fax_link

    A link that opens XipFax’s send screen with the fax number filled in: an office by its office_id from find_fax_number, or a fax number in the United States, its territories or Canada. The person adds their pages there, signs in and pays.

  • send_fax

    Sends the person’s XipFax draft to an office, by its office_id from find_fax_number, or to a fax number in the United States, its territories or Canada. Give document_ids, as finish_fax_file gave them, in the order you added them. It goes at once only where the person has a plan

  • get_fax

    How a fax of the person’s went, by its id, as send_fax gave it: whether it is sending and how far it has got, delivered, or failed and why, and when it is tried again, with its pages, its price and its times. Answers a fax they received too. For a delivered fax’s confirmation, us

  • get_fax_confirmation

    The confirmation of a fax the person sent that was delivered: one page that says who received how many pages, from whom and when, which they can pass on. Answers a link that reads it, as a PDF, for a few minutes: give the person the link. Refused, saying why, for a fax not delive

  • add_fax_file

    Puts a PDF from the person’s own disk on their XipFax draft. A photo of any kind, such as a JPEG, PNG, HEIC, WebP, GIF or AVIF, goes as a PDF made from it first on their computer, upright as a photo viewer shows it: on a Mac, `sips -Z 2100 -s format pdf --out .pdf` makes one, upr

  • finish_fax_file

    Once the file’s PUT has answered 200, has XipFax read it back and count its pages. Answers the document, ready to send, with its pages; refused where the file never arrived, is locked or unreadable, or takes the fax past the pages a fax may hold. Give send_fax its id.

  • add_fax_file_from_url

    Puts a PDF at a public address on the person’s XipFax draft: XipFax fetches it from the link, which must answer with the PDF itself, and reads its pages. Answers the document, ready to send, with its pages; refused, saying why, where XipFax can’t fetch it, or the PDF is locked, u

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ! 주의

    제작자와 저장소 일치

    레지스트리에 소스 저장소가 없어서, 게시자(xipfax.com)와 코드를 맞춰 볼 수 없어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    145ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 9개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32708개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32708개 중 91%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32708개 중 37%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

XipFax, 안전한가요?

해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.0.0)은 3일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, OpenTakeoff

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211그저께 업데이트
설치

OpenTakeoff

제작자: Kentucky-ai

Construction takeoff for AI agents: load plans, set scale, measure, count, export with provenance.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

저장소에서 README를 찾지 못했어요

PopNx에게 묻기