Embodify

Name: Embodify
Author: YidaYang

제작자: YidaYang버전 0.1.0a2i★ –i내 컴퓨터에서 실행

레지스트리 이름io.github.YidaYang/embodify

설치

개요

제작자가 쓴 설명(영어 원문)

Give your agent a body: observe and control simulated robots (LIBERO, RoboDojo) over MCP.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

사용자 의견i아직 리뷰가 없어요리뷰는 다음 단계에서 계정 기능과 함께 열려요
우리의 기본 점검i1개 중 1개 통과공개된 정보로 점검했으며, 코드는 아직 스캔하지 않았어요
사용 정도i아직 측정 안 함★ –

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

연결 방식: 내 컴퓨터에서 실행
전송 방식: stdio
카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

기본 점검: 1개 중 1개 통과
내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

ClaudeClaude CodeCursorVS CodeChatGPT

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "embodify": {
      "command": "uvx",
      "args": [
        "embodify-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add embodify -- uvx embodify-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "embodify": {
      "command": "uvx",
      "args": [
        "embodify-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "embodify": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "embodify-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 YidaYang 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
… 아직 점검 안 함
계속 관리되고 있음
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
… 아직 점검 안 함
라이선스 있음
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
– 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
– 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
… 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

이 카테고리의 다른 서버 32476개 중 0%보다 스타가 많아요
이 카테고리의 다른 서버 32476개 중 53%보다 최근에 레지스트리에 공개됐어요
기본 점검 결과가 이 카테고리의 다른 서버 32476개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Embodify, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.1.0a2)은 35일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, zanadir

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트

설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트

설치

zanadir

제작자: MustacheCase

Find what a repository's CI is missing, and which security checks cannot fail the build.

내 컴퓨터에서 실행오늘 업데이트

설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Embodify

Give your agent a body.

Your best embodied agent is your favorite agent.

Embodify lets the agent you use every day — Claude Code, Codex or any other MCP-capable agent — see and control robots directly, and keeps everything else that makes it yours. Bring in frontier models with embodied manipulation skills, such as GPT-6 Astra and Claude Opus 5.5, and let your AI companion step into the physical world.

中文 · One-line setup · Backends · For research · Skills · Roadmap

First release (0.1.0a1). Supports LIBERO and RoboDojo today; support for

RoboTwin and the LeRobot SO-101 arm is coming soon.

Why Embodify

Most embodied agents are built from scratch: a dedicated harness wraps a model, hands it a fixed set of robot actions, and nothing else. The agent you use every day already has what those harnesses lack:

Context and memory. It manages long sessions and remembers across them.
It knows you. Your preferences, your projects, your lab setup.
It talks with you in the terminal, IDE, desktop app or chat you already use. You can ask how it is going, step in, correct it, or teach it mid-task.
It has a computer. It writes and runs code, uses its tools, searches the web and reads papers.

Embodify keeps all of that and adds a body. Install the plugin and your agent gets robot observation and control tools over MCP — a protocol it already uses for everything else — plus skills that teach it how to operate robots and how to achieve recursive self-improvement (RSI) from its own experience.

Why "best"

A general agent with a body is stronger than a harness that can only move a robot:

It can think with tools, not only act. When a task needs geometry it can write a script; when it needs a fact it can search; when it needs perception it can run a model.
It keeps track. Long-horizon manipulation fails when the agent forgets what it already tried. Mature agents manage context and memory well.
It works with you. It asks you when a task is ambiguous, takes your guidance when it gets stuck, and remembers your corrections next time.
It controls robots in its native language. Robot control arrives as ordinary MCP tool calls, the same shape as every other tool the agent uses.
It builds on frontier embodied models. Your agent runs on models with frontier embodied manipulation skills, such as GPT-6 Astra and Claude Opus 5.5, and every model upgrade makes your robot better, with no retraining.
It improves itself recursively. It turns every episode into lessons, lessons into rules and rules into new skills, and gets better the more it works.
Zero-shot, few-shot and in-context learning come easily. A general agent takes on new tasks without training: describe a task in plain language (zero-shot), show it a few examples (few-shot), or put instructions, demonstrations and past experience in its context (in-context learning, ICL).

What's inside

Embodify is an agent plugin with two parts, and installing the plugin gives your agent both:

Part	What it gives your agent
MCP server (`embodify-mcp`, registered as `embodify`)	Tools to list tasks, start an episode, observe cameras and robot state, move end effectors, open and close grippers, and coordinate two arms.
Skills	Know-how: running a careful observe–act loop, keeping a profile of the robot body and cameras, and learning from past episodes. More perception skills are coming soon.

flowchart LR

A["Your agent Claude Code · Codex · …"] -- "MCP (stdio)" --> B["embodify-mcp episodes · budgets · logs"] K["Embodify skills"] -. "loaded by" .-> A B --> I["Backend interface"] I --> L["LIBERO"] I --> R["RoboDojo"] I --> T["RoboTwin (WIP)"] I --> H["SO-101 and other real robots (WIP)"] I -. "SSH / TCP" .-> G["Remote server"]

The MCP server is the front end. Each simulator, benchmark or robot is a backend behind one small interface, so adding a new one does not change what the agent sees. Highlights:

Works with any MCP host. No LLM calls inside; your agent keeps its own model, memory, skills and tools.
One call, one motion. The control loop runs next to the simulator. Each action returns the actual displacement, remaining error, a stop reason and fresh camera images.
Remote simulation. Run the simulator on your lab's GPU server over SSH while the agent stays on your laptop. Heartbeats keep high-latency links alive; if the link drops, the episode aborts cleanly and reset_task reconnects.
Fair evaluation. When you use Embodify to evaluate an agent's manipulation skills, task success is recorded for humans and never exposed to the agent.
Live monitor and replay. Watch running episodes live in a browser, or replay past ones frame by frame.

Backends

Backend	Robot	Status
`fake`, `fake-two-arm`	Kinematic diagnostic, one or two arms	✅ Included, no simulator needed
`libero`	Franka Panda, 130 tasks in 5 suites	✅ Included
`robodojo`	Dual ARX X5, all 54 simulation tasks	✅ Included
RoboTwin	Dual-arm manipulation benchmark	🚧 Coming soon
LeRobot SO-101	Real robot: 5-DoF arm with gripper	🚧 Coming soon
`remote`	Any backend above, on another machine	✅ SSH or trusted TCP

Coming soon: robot arms such as xArm, mobile manipulators, humanoids and dexterous hands. If there is a simulator or robot you would like us to support, open a GitHub issue with details about it. We welcome contributions of new backends.

For research

Embodify doubles as a testbed for the embodied manipulation abilities of language models and agent frameworks. Run GPT, Claude, Gemini, Qwen and other models, through Claude Code, Codex or your own agent framework, on the same simulated benchmarks with the same tools, and compare them directly.

Standard benchmarks: LIBERO (130 tasks in 5 suites) and RoboDojo (54 tasks), with RoboTwin coming soon.
Fair by design: task success is recorded for evaluators and never shown to the agent, and --lock-task fixes the scene.
Controlled budgets: episode budgets and per-call step limits are configurable and logged.
Complete records: tool calls, robot states and camera frames are saved for replay and analysis.

Typical studies include zero-shot robot manipulation by frontier models, comparisons of agent frameworks on the same model, the effect of skills and memory, and recursive self-improvement across episodes. See citation for how to cite Embodify and what to report.

Quick start

One-line setup

Paste this into Claude Code, Codex or any other agent you use:

Install Embodify (https://github.com/YidaYang/embodify) for yourself, then set up a LIBERO environment or connect to my existing simulator.

That's it. Your agent installs the Embodify plugin, sets up the simulator and tells you when to restart the session. (Agents: follow the agent setup guide.)

Manual install

Embodify starts its MCP server with uv, straight from PyPI. If you do not have uv yet, install it with python -m pip install uv or the official installer.

Claude Code

claude plugin marketplace add YidaYang/embodify

claude plugin install embodify@embodify

Codex

codex plugin marketplace add YidaYang/embodify

codex plugin add embodify@embodify

The plugin brings both the MCP server, registered as embodify, and the skills. The server starts on the Fake backend, so you can try the tools right away; connect a real simulator next. It reads its settings from ~/.embodify/config.json (see backend setup). To check the package on its own, without an agent:

uvx --from embodify-mcp embodify-mcp-smoke   # end-to-end check: no simulator, GPU or model needed

Other agents

Register the server in your agent's MCP configuration using examples/mcp.json.
If your agent supports Agent Skills (SKILL.md folders), copy or link the folders in plugin/skills/ into its skills directory.

Restart the session, then ask your agent something like *"Reset the task, describe what the cameras show, then raise the gripper 5 cm."*

Connect a real simulator

Let your agent do this step. Paste:

Connect Embodify to a real simulator for me: set up LIBERO on this machine, or connect to my existing simulator. Follow https://github.com/YidaYang/embodify/blob/main/docs/agent-setup.md.

Your agent installs the simulator or connects to yours over SSH, writes the server settings to ~/.embodify/config.json and asks you to restart the session. To do it by hand, see backend setup.

Watch robots live and replay episodes

Add "monitor-port": 8765 to ~/.embodify/config.json and open http://127.0.0.1:8765 to watch the robot work live, with every camera view, the robot state and each tool call your agent makes, or to replay any past episode frame by frame. To browse saved runs without a running server:

uvx --from embodify-mcp embodify-mcp-monitor   # reads ~/.embodify/runs

The monitor listens on localhost only.

MCP tools

Tool	Purpose
`get_session_info`	Current run, task, step budget and robot state; no images
`list_tasks`	Browse the backend's task catalogue
`reset_task`	Start an episode and return the first camera images
`observe`	Camera images and robot state, without moving
`move_relative`	Move one end effector by a translation and optional rotation
`set_gripper`	Open or close a gripper
`control_arms`	Move several arms together with common progress (two-arm backends)
`stop_episode`	End the episode and write its record

Translations are in meters, rotations in radians, quaternions in xyzw order. Frames and stop reasons are defined in the action contract.

Skills

The plugin contains these skills:

Skill	Status	What it does
embodied-control	v0	The observe–act loop: small moves, reading stop reasons, verifying grasps, releasing in a separate call
robot-profile	v0	Keep a profile of the robot: arms, cameras, frames, calibration and measured behavior
task-experience	v0	Write a lesson after every episode, read relevant lessons before the next, promote repeated lessons to rules
object-segmentation	Coming soon	Open-vocabulary segmentation of camera images
depth-ranging	Coming soon	Pixel to 3D position from depth and calibration

Skills are grouped into three families that will keep growing:

Embodiment knowledge: how this particular robot is built, where its cameras are and how it actually moves.
Manipulation tools: perception, measurement and planning tools, including ideas from work such as Code as Policies.
Recursive self-improvement: turning experience into lessons, lessons into rules and eventually into new skills, improving recursively.

Roadmap

Backends: RoboTwin; LeRobot SO-101 as the first real robot, with workspace limits, human-judged success and an emergency stop;

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

Embodify

개요

PopNx MCP의 세 기둥

할 수 있는 일

설치

설치하기 전에

할 수 있는 일

기본 점검i

제작자와 저장소 일치

계속 관리되고 있음

라이선스 있음

엔드포인트 응답

OAuth로 로그인

도구 설명에 숨겨진 지시 없음

기타 카테고리의 다른 서버와 비교i

자주 묻는 질문

대안

Spec Driven Development

Remote Desktop Commander

zanadir

제작자의 README

Why Embodify

Why "best"

What's inside

Backends

For research

Quick start

One-line setup

Manual install

Claude Code

Codex

Other agents

Connect a real simulator

Watch robots live and replay episodes

MCP tools

Skills

Roadmap