World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Local MCP gateway: approved tools behind a signed authority check, per call or as exactly-once jobs
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 11/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 23/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Irontrellis Gateway 설치해 줘. https://mcp.popnx.com/i/zerohourzulu-irontrellis-gateway.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Irontrellis Gateway을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "irontrellis-gateway": { "command": "npx", "args": [ "-y", "@ramex-labs/irontrellis-mcp-gateway", "--config" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Irontrellis Gateway의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"irontrellis-gateway": {
"command": "npx",
"args": [
"-y",
"@ramex-labs/irontrellis-mcp-gateway",
"--config"
]
}
}
}Irontrellis Gateway을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Irontrellis Gateway을 쓰고 있다고 하거나 답에 Irontrellis Gateway 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Irontrellis Gateway에 연결할 수 없어요
Irontrellis Gateway는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Irontrellis Gateway에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Irontrellis Gateway을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user irontrellis-gateway -- npx -y @ramex-labs/irontrellis-mcp-gateway --config 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Irontrellis Gateway의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user irontrellis-gateway -- npx -y @ramex-labs/irontrellis-mcp-gateway --configIrontrellis Gateway이 목록에 있고 연결됨으로 보이면 돼요
Irontrellis Gateway을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Irontrellis Gateway을 쓰고 있다고 하거나 답에 Irontrellis Gateway 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Irontrellis Gateway을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "irontrellis-gateway": { "command": "npx", "args": [ "-y", "@ramex-labs/irontrellis-mcp-gateway", "--config" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Irontrellis Gateway의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
~/.cursor/mcp.json
이 설정을 붙여 넣고 빈 값을 채운 뒤 저장
{
"mcpServers": {
"irontrellis-gateway": {
"command": "npx",
"args": [
"-y",
"@ramex-labs/irontrellis-mcp-gateway",
"--config"
]
}
}
}Irontrellis Gateway을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Irontrellis Gateway을 쓰고 있다고 하거나 답에 Irontrellis Gateway 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Irontrellis Gateway을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "irontrellis-gateway": { "type": "stdio", "command": "npx", "args": [ "-y", "@ramex-labs/irontrellis-mcp-gateway", "--config" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Irontrellis Gateway의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
MCP: Open User Configuration
이 설정을 붙여 넣고 빈 값을 채운 뒤 저장
{
"servers": {
"irontrellis-gateway": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@ramex-labs/irontrellis-mcp-gateway",
"--config"
]
}
}
}Irontrellis Gateway을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Irontrellis Gateway을 쓰고 있다고 하거나 답에 Irontrellis Gateway 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user irontrellis-gateway -- npx -y @ramex-labs/irontrellis-mcp-gateway --configClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"irontrellis-gateway": {
"command": "npx",
"args": [
"-y",
"@ramex-labs/irontrellis-mcp-gateway",
"--config"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"irontrellis-gateway": {
"command": "npx",
"args": [
"-y",
"@ramex-labs/irontrellis-mcp-gateway",
"--config"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"irontrellis-gateway": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@ramex-labs/irontrellis-mcp-gateway",
"--config"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 zerohourzulu 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 7일 전
Apache-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 @ramex-labs/irontrellis-mcp-gateway@1.0.0-rc.2 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/zerohourzulu-irontrellis-gateway)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 7일 전 변경됐고, 최신 버전(1.0.0-rc.2)은 20일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Irontrellis Gateway | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
@ramex-labs/irontrellis-mcp-gateway 1.0.0-rc.2.3 puts the MCP tools you approve behind IronTrellis (formerly Continuity), which keeps a signed, replayable history of what each AI agent may do. Before a call reaches an upstream tool, the gateway checks the agent's current authority in that history (format 2); for exactly-once jobs and recorded calls, it also keeps the state of the attempt on disk. MCP client and server dependencies are pinned to 2.2.0.
An agent that calls its tools directly can act on authority that was taken away a minute ago, or send the same request twice after a lost reply. The gateway sits between your MCP client and the upstream MCP servers you approve, and handles these cases:
| What goes wrong | What the gateway does |
|---|---|
| A grant is revoked while the agent runs | It reads the history afresh on every call, so new work under that grant answers DENIED |
| A reply is lost and the agent asks again | An exactly-once job answers from its original attempt and never forwards it again |
| An upstream tool's definition changes | It compares the tool with the approved definition before each new admission or per-call forward, and refuses a mismatch (TOOL_CHANGED) |
Install from the next tag, or use a verified packed installation; the 1.0.0-rc.2 build is not claimed publicly released.
npm install -g @ramex-labs/irontrellis-mcp-gateway@next # provides irontrellis-mcp-gateway and irontrellis-mcp-ops
irontrellis-mcp-gateway setup /absolute/new-case # a private synthetic case; add --mode per-call for the other mode irontrellis-mcp-gateway --config /absolute/new-case/gateway.json # serves stdio: put this command in your MCP client's settings irontrellis-mcp-ops inspect --config /absolute/new-case/gateway.json irontrellis-mcp-ops revoke --config /absolute/new-case/gateway.json --authority write
setup creates a format-2 history with one worker agent, two local upstream servers (documents and tickets) and two jobs, read_incident and create_incident_ticket (two tools of the same names in per-call mode). The worker's grants and session expire after an hour. From your MCP client:
| You call | The gateway answers |
|---|---|
create_incident_ticket | RESPONSE_RETAINED: forwarded once, and the reply kept on disk |
create_incident_ticket again, with the same title | RECONCILIATION_ONLY: the retained reply; nothing is forwarded. A different title is refused (OPERATION_CONFLICT) |
create_incident_ticket after the revoke | RECONCILIATION_ONLY with its retained reply, because it already ran. Had it never run, it would answer DENIED: the write grant covers this job |
The server speaks stdio and waits for an MCP client. The setup is a disposable case with local credentials and synthetic tools. Protect its private directory and never reuse its credentials in production. An unknown outcome needs investigation of the original business key, not a new key to force a retry.
Exactly-once jobs, mode: "exactly-once" (the default) | Per-call tools, mode: "per-call" | |
|---|---|---|
| One operation is | A fixed tool and business key | One call |
| A repeat | Reconciles the original attempt and never deliberately forwards it again; changed arguments conflict | Is a new call, checked again |
| Every call checks | The job's fixed schema and current authority; a new admission also checks the approved tool definition | Current authority and the configured tool definition |
| Admitted as an intent in the history | Every job, once | Each call, only with recordCalls: true: set it when each call must be admitted and charged through the recorded path |
The profile name is not a guarantee of exactly-once effects inside an arbitrary upstream service. A query-only ALLOW is not a dispatch permit.
enforceFromReadOnlyHistory (set by hand) keeps enforcing from a never-migrated legacy or format-1 history read-only: every open warns, and it serves only calls that need no record: a call that must be recorded is refused (FORMAT_READ_ONLY with a remedy) before anything is dispatched. Migrate to write.
Keep the authenticated history ID/domain, agent, runtime session, signers, role/tenure, trusted clock, upstream executable, business mapping and storage outside agent control. A model supplies only the bounded business arguments permitted by the fixed schema. Retiring or revoking authority cannot undo an effect already sent.
| Subpath | Purpose |
|---|---|
| root | createGateway, gateway/server integration and public types |
/operations | Operator inspection, lease recovery, snapshots and revocation helpers |
/access-policy | Trusted access-policy configuration |
/server | MCP server integration |
/data | The bounded private-file and canonical-data helpers the anchor outbox shares (durableCreate, readPrivate, privateDirectory, …) |
| `/http` | serveGatewayHttp for loopback evaluation; serveGatewayRouter and serveGatewayBackend for the explicit router/backend profile |
| `/cooperative` | createCooperativeGateway, with run, status, recover, cancel and observe over a pinned cooperative destination |
| `/tasks` | createTaskManager and routeTaskRequest for io.modelcontextprotocol/tasks, bound to the configured cooperative gateway and caller identity |
| `/access-http` | createAccessVerifier, binding issuer, resource, keys and the fixed caller/tenant/revision mapping |
The four subpaths in bold are separate capabilities; importing one does not enable another or establish a secure public deployment. Public HTTPS deployment is not part of this release. Each subpath has its compiled runtime and declaration exports and a default export key.
The loopback HTTP helper is an evaluation profile. The router/backend profile requires its explicit TLS/mTLS configuration, pinned private peer, channel-bound assertions, nonce storage and independent bearer/Core checks. Trusted isActive and current-access guards must remain effective across asynchronous work. A token or authenticated transport is not native authority to perform an operation. HTTP and Tasks do not turn an uncertain effect into a new attempt.
A refusal decided by the history is returned with its recording status; a recording failure cannot turn a refusal into ALLOW. Core and budget refusals are distinguished from connector reports. Upstream effect or receipt fields are assertions under the connector/counterparty profile; replay does not prove an external business outcome. Replies retain externalOutcome: NOT_PROVEN where applicable.
| Result | Operator interpretation |
|---|---|
RESPONSE_RETAINED | An upstream reply was retained; inspect its error status and scope |
RECONCILIATION_ONLY | Original retained attempt, with no new forwarding |
OUTCOME_UNKNOWN | A dispatch start exists but the usable reply/outcome is not established |
DELAYED / NOT_DISPATCHED / STOPPED | Dispatch has not started (anchoring, or an admission without a start record); inspect the reason and, with anchoring, the resume horizon |
FORWARDED | Per-call forwarding occurred; inspect whether it was recorded |
DENIED / REFUSED | Read the decision and the bounded refusal reason; do not bypass it |
BUSY | Exclusion or a resource boundary prevents concurrent work |
Every message from the agent is checked before the MCP layer sees it: at most 16 KiB, strict JSON, and no more than 1,024 messages within any 60 seconds. A flood ends the gateway (INPUT_REFUSED); a long session of ordinary calls does not. Upstream servers are bounded the same way, and one that stops or floods is disconnected and started again, with its tool definition checked, on the next governed call to it.
Access is checked again after the attempt is durably retained and immediately before the call enters the upstream tool. A revocation at that point prevents the new effect, while an attempt already admitted keeps its uncertain state. No callback, old approval or retained result can replace that check.
Use operations, recovery and access-policy for operator procedures. Snapshot contents are sensitive; protect them as credentials/evidence until the chosen profile's exclusions are verified. Never clear a live lock or recovery journal to make a stuck operation run again.
Privileged hosts can configure the live anchoring barrier through the programmatic API. It retains an admitted request while waiting for eligible protected reports, checks a stop latch, and resumes only while no dispatch start exists. The CLI setup does not enable anchoring.
Know its limits in 1.0.0-rc.2. This build includes no qualified report producer, and nothing in it verifies a chain anchor: verifyAnchor returns no report, irontrellis verify takes none, and the diagnostic connector reports cannot release this barrier. A production-profile barrier therefore never opens unless an external producer supplies reports, and it takes the mode a report declares, CONSENSUS_VERIFIED included, on that producer's word. No consensus-verified anchoring is claimed; the separate tools used for the demonstration anchoring records report TRUSTED_NODE only, never consensus-verified.
The package's tests cover the real engine, crash and retry, transport, strict declarations and a packed install. The source tests are src/http-test.test.mjs, src/cooperative-test.test.mjs and src/http-twohop-test.test.mjs; the packed verifier is src/http-verify-install.py with the selected offline dependencies. These are the package's own tests; no separate review of the transport subpaths is claimed here.
This is not a hostile-code sandbox, distributed transaction manager, proof of downstream success or production chain/finality implementation. Upstreams share the configured host trust boundary. Cooperating destinations need their own checkpoint, fencing and deduplication contract. Whole-directory rollback, compromised administrators, a destination's unseen revocation and irreversible effects after dispatch remain distinct risks.
What the gateway records (admissions, refusals, effects, receipts) is signed with runtime session keys, not the owner key, so it stays unattested and unwitnessed until the next owner write; see operations. The attestation policy for PHL, Proof of Human Lineage (ATTESTED), ships in the 1.0.0-rc.2 core; transport test success does not establish every such policy combination.
Dependencies: @ramex-labs/irontrellis, @ramex-labs/irontrellis-remote, jose, @modelcontextprotocol/server and @modelcontextprotocol/client (jose 6.2.12 and the MCP SDK 2.2.0, pinned exactly). Apache-2.0.
*Last reviewed: 24 October 2026. This page is revisited at each release.*