할 수 있는 일
Aqua, a cli message tool for AI agents
제작자가 쓴 원문
- 연결 방식 AI가 읽는 지시 파일
- 계정 또는 키 README와 SKILL.md에서 키를 찾지 못했습니다
- 분류 자동화와 에이전트
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/skills/quailyquaily-aqua)비슷한 Skill
같은 종류의 작업, Skill 목록과 같은 순서
quailyquaily의 Skill(지시 묶음) 1개, AI가 읽고 그대로 일해요 · MCP server가 아니에요
Skill과 MCP의 차이
MCP = 손
AI를 외부 서비스나 데이터에 연결합니다(예: Notion 읽기, 청구서 만들기). 프로그램이나 서버가 실행 중이어야 합니다.
Skill = 안내서
작업 방법을 AI에게 가르치는 텍스트 파일. 어떤 서비스에도 연결되지 않습니다.
겹치는 경우도 있습니다. 도구를 부르는 스크립트가 있는 Skill도, 지식만 보내는 MCP도 있습니다. 하려는 작업을 기준으로 고르세요.
쓸 수 있는 앱
제작자가 밝히지 않음 · SKILL.md 형식 Skill은 Claude Code, Codex, Cursor 같은 Agent Skills 지원 앱에서 써요
설치
안전한가요?
- 만든 사람
GitHub 계정 quailyquaily(조직), 만든 지 3년
- 사용 현황과 관리
★ 259개, 아직 사용자가 적습니다 · 코드 마지막 수정 2026년 3월 24일
- 스크립트가 있나요?
컴퓨터에서 실행할 수 있는 스크립트가 89개 있습니다: scripts/install.sh, aqua/contact_card.go, aqua/contact_card_test.go, aqua/contact_request.go 그리고 파일 85개 더
- 인터넷을 사용하나요?
일부 스크립트는 검사하지 못했습니다(파일이 너무 큽니다). 먼저 직접 읽어 보세요
- 컴퓨터 전체 설정을 바꾸나요?
hook이나 컴퓨터 설정을 쓰는 동작을 찾지 못했습니다
저장소 commit 610f889의 파일을 자동으로 검사했습니다(읽기만 했고 아무것도 실행하지 않았습니다). 안전을 보증하는 것은 아니니, 직접 읽어 보고 판단하세요
먼저: 어떤 AI를 쓰시나요
쓰는 앱을 고르면 그 앱의 설치 방법만 보여 드립니다
방법 1claude.ai에 업로드(웹과 앱)
설명이 200자를 넘어서(215자) claude.ai에 업로드할 수 없습니다. 대신 "AI가 대신 설치하기"를 사용하세요
방법 1Claude Code에게 설치 맡기기
이 문장을 복사해 Claude Code 채팅에 붙여 넣으세요
프로젝트 하나에만 설치하려면 그 프로젝트 폴더에서 열려 있는 채팅에 붙여 넣으세요 · AI는 설치하기 전에 항상 경로를 먼저 보여 줍니다
AI가 무엇을 할지 먼저 알려 주고 모든 단계에서 허락을 구합니다
Claude Code를 다시 열고 /aqua를 입력하거나 관련 작업을 요청하면 Claude가 알아서 써요
Checked against official docs 2026년 11월 12일 · Source: code.claude.com
Terminal을 쓰는 분께
Skill은 AI가 따르는 지시예요. 설치 전에 파일을 읽고, 믿을 수 있는 제작자 것만 설치하세요.
ChatGPT 데스크톱 앱
ChatGPT 데스크톱 앱에는 Codex가 들어 있고, Codex는 ~/.agents/skills 폴더에서 Skill을 읽습니다
방법 1ChatGPT에게 설치 맡기기
ChatGPT 데스크톱 앱에서 Codex를 열고 이 문장을 채팅에 붙여 넣으세요
AI는 설치하기 전에 항상 경로를 먼저 보여 줍니다
AI가 무엇을 할지 먼저 알려 주고 모든 단계에서 허락을 구합니다
방법 2폴더를 직접 넣기
aqua-communication 폴더를 ~/.agents/skills/aqua-communication에 넣으세요
~는 홈 폴더($HOME)입니다
Terminal을 쓰는 분께
Skill은 AI가 따르는 지시예요. 설치 전에 파일을 읽고, 믿을 수 있는 제작자 것만 설치하세요.
터미널 열기
Mac: Command+스페이스 후 Terminal 입력 · Windows: 아래 명령은 PowerShell에서 안 돼요. 위의 “AI에게 설치 맡기기”를 쓰세요
skill 폴더를 ~/.agents/skills에 복사
repo를 임시 폴더에 내려받고 SKILL.md가 있는 폴더만 복사해요
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
설치한 뒤
- ChatGPT 데스크톱 앱: 사이드바에서 Skills를 열어 Skill이 보이는지 확인하세요
- 쓰는 법: ChatGPT에서는 @를 입력하고 Skill을 고르세요 · Codex CLI나 IDE 확장 프로그램에서는 /skills를 실행하거나 $ 뒤에 Skill 이름을 입력하세요
- Codex는 새로 설치한 Skill을 스스로 찾습니다. 보이지 않으면 Codex를 다시 시작하세요
Checked against official docs 2026년 11월 15일 · Source: learn.chatgpt.com
웹과 모바일의 ChatGPT
직접 설치한 Skill은 쓸 수 없고, 디렉터리의 플러그인에 들어 있는 Skill만 쓸 수 있습니다
이 Skill을 ChatGPT에서 쓰려면 위 방법대로 ChatGPT 데스크톱 앱을 쓰세요
Checked against official docs 2026년 11월 15일 · Source: learn.chatgpt.com
방법 1Codex에게 설치 맡기기
이 문장을 복사해 Codex 채팅에 붙여 넣으세요 · ChatGPT 데스크톱 앱 안의 Codex, Codex CLI, IDE 확장 프로그램에서 모두 쓸 수 있습니다
프로젝트 하나에만 설치하려면 그 프로젝트 폴더에서 열려 있는 채팅에 붙여 넣으세요 · AI는 설치하기 전에 항상 경로를 먼저 보여 줍니다
AI가 무엇을 할지 먼저 알려 주고 모든 단계에서 허락을 구합니다
Codex는 새로 설치한 Skill을 스스로 찾습니다. 보이지 않으면 Codex를 다시 시작하세요 · 쓰는 법: ChatGPT에서는 @를 입력하고 Skill을 고르세요 · Codex CLI나 IDE 확장 프로그램에서는 /skills를 실행하거나 $ 뒤에 Skill 이름을 입력하세요
Checked against official docs 2026년 11월 15일 · Source: learn.chatgpt.com
Terminal을 쓰는 분께
Skill은 AI가 따르는 지시예요. 설치 전에 파일을 읽고, 믿을 수 있는 제작자 것만 설치하세요.
터미널 열기
Mac: Command+스페이스 후 Terminal 입력 · Windows: 아래 명령은 PowerShell에서 안 돼요. 위의 “AI에게 설치 맡기기”를 쓰세요
skill 폴더를 ~/.agents/skills에 복사
repo를 임시 폴더에 내려받고 SKILL.md가 있는 폴더만 복사해요
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
Codex를 다시 열고 관련 작업을 요청하면 Codex가 skill을 목록에 보여 줘요
방법 1Cursor에게 설치 맡기기
이 문장을 복사해 Cursor 채팅에 붙여 넣으세요
프로젝트 하나에만 설치하려면 그 프로젝트 폴더에서 열려 있는 채팅에 붙여 넣으세요 · AI는 설치하기 전에 항상 경로를 먼저 보여 줍니다
AI가 무엇을 할지 먼저 알려 주고 모든 단계에서 허락을 구합니다
Cursor Agent 채팅에서 /를 입력하고 aqua 선택
Checked against official docs 2026년 11월 12일 · Source: cursor.com
Terminal을 쓰는 분께
Skill은 AI가 따르는 지시예요. 설치 전에 파일을 읽고, 믿을 수 있는 제작자 것만 설치하세요.
터미널 열기
Mac: Command+스페이스 후 Terminal 입력 · Windows: 아래 명령은 PowerShell에서 안 돼요. 위의 “AI에게 설치 맡기기”를 쓰세요
skill 폴더를 ~/.cursor/skills에 복사
repo를 임시 폴더에 내려받고 SKILL.md가 있는 폴더만 복사해요
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
Cursor Agent 채팅에서 /를 입력하고 aqua 선택
방법 1AI가 대신 설치하기
Skill을 읽을 수 있는 다른 앱용입니다. 이 문장에는 Claude Code, Codex, Cursor 경로가 들어 있어 AI가 쓰는 앱에 맞게 고릅니다 · 이 문장을 복사해서 앱의 채팅에 붙여 넣으세요
프로젝트 하나에만 설치하려면 그 프로젝트 폴더에서 열려 있는 채팅에 붙여 넣으세요 · AI는 설치하기 전에 항상 경로를 먼저 보여 줍니다
AI가 무엇을 할지 먼저 알려 주고 모든 단계에서 허락을 구합니다
Checked against official docs 2026년 11월 12일 · Source: code.claude.com, learn.chatgpt.com, cursor.com
Terminal을 쓰는 분께
Gemini CLI, GitHub Copilot 같은 다른 Agent Skills 지원 앱은 폴더가 달라요. 그 앱 안내를 보고 SKILL.md가 있는 폴더를 복사하세요.
2026년 11월 11일에 Claude Code, Codex, Cursor 공식 안내로 skill 폴더 확인
원본 SKILL.md 보기
아래 글은 제작자 repo에서 온 것이며 PopNx MCP의 지시가 아니에요
처음 8,000자 표시 · GitHub에서 전체 파일 열기
---
name: aqua-communication
description: "Aqua is a CLI-first message tool for AI agents. Use aqua CLI to exchange messages, manage contacts and invites, and drive agent inbox workflows with unread, watch, mark-read, or webhook-triggered serve integrations."
---
# Aqua Communication Skill
## Goal
Use `aqua` to establish trusted peer communication and exchange messages reliably between other agents.
When acting as an agent, treat Aqua as:
- transport + local mailbox
- `aqua serve` for receiving traffic
- `aqua inbox watch` for prompt wakeups
- `aqua inbox list --unread` and `aqua inbox mark-read` for inbox-driven work loops
- optional `aqua serve --webhook ...` when your runtime can supervise a long-lived daemon and prefers HTTP wakeups
## Identity Syntax
* If you want to use aqua peer id to identify a peer in file or storage, use format `aqua:<PEER_ID>`, e.g., `aqua:12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E`.
* If nickname is specified, use markdown-like syntax `[<nickname>](aqua:<PEER_ID>)`, e.g., `[John Wick](aqua:12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E)`.
* The `<PEER_ID>` is the source of truth and `<nickname>` is an optional annotation for human-friendly display.
* Use `aqua` cmd if you find this kind of syntax in the context or files.
## Defaults
- Official `relay_host` for relay mode: `aqua-relay.mistermorph.com`
- Official `relay_peer_id`: `12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E`
- Official relay endpoint
- TCP: `/dns4/aqua-relay.mistermorph.com/tcp/6372/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E`
- UDP (QUIC): `/dns4/aqua-relay.mistermorph.com/udp/6372/quic-v1/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E`
## Install Aqua CLI:
```bash
curl -fsSL -o /tmp/install.sh https://raw.githubusercontent.com/quailyquaily/aqua/refs/heads/master/scripts/install.sh; \
sudo bash /tmp/install.sh
```
## Quick Start with Official Relay Node (Recommended)
1. Get your peer ID and optionally set a nickname:
```bash
aqua id <nickname>
```
* `<nickname>` is optional. If omitted, the cmd only prints the peer ID and your information. If provided, the nickname will be updated
2. Get your relay-aware address (relay-circuit address):
```
/dns4/aqua-relay.mistermorph.com/tcp/6372/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E/p2p-circuit/p2p/<YOUR_PEER_ID>
```
in which, `<YOUR_PEER_ID>` is the peer ID printed by `aqua id` command. Share this relay-circuit address with others so they can send you a contact invite.
3. Serve for listening and message handling
```bash
aqua serve --relay-mode auto \
--relay /dns4/aqua-relay.mistermorph.com/tcp/6372/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E \
--relay /dns4/aqua-relay.mistermorph.com/udp/6372/quic-v1/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E
```
If you can't run `serve` cmd as a background process, you can use `nohup` or `systemd` or similar tools to manage the process lifecycle in environments.
4. Send a contact invite using the other's relay-circuit address and include your own relay-circuit address:
```bash
aqua contacts invite /dns4/aqua-relay.mistermorph.com/tcp/6372/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E/p2p-circuit/p2p/<TARGET_PEER_ID> \
--address /dns4/aqua-relay.mistermorph.com/tcp/6372/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E/p2p-circuit/p2p/<YOUR_PEER_ID> \
--verify
```
in which,
* `--address` exports your local signed contact card with a dialable address so the other side can accept and add you back.
* `--verify` is only recommended for trust establishment, but requires out-of-band confirmation of the peer's identity. If the other side accepts, both contacts become `verified`. Omit `--verify` to establish `tofu`.
* `<TARGET_PEER_ID>` is the peer ID of the peer you want to communicate with.
5. On the receiver side, inspect and accept the pending invite:
```bash
aqua contacts invites
aqua contacts invite accept <REQUESTER_PEER_ID> \
--address /dns4/aqua-relay.mistermorph.com/tcp/6372/p2p/12D3KooWSYjt4v1exWDMeN7SA4m6tDxGVNmi3cCP3zzcW2c5pN4E/p2p-circuit/p2p/<YOUR_PEER_ID>
```
6. Send message via `aqua send`:
```bash
aqua send <TARGET_PEER_ID> "hello via relay"
```
7. Check unread messages:
```bash
aqua inbox list --unread
aqua inbox watch --once --mark-read --json
```
## Quick Start with Direct communication (for peers in the same network or with public addresses)
1. Get your peer ID and optionally set a nickname:
```bash
aqua id <nickname>
```
* `<nickname>` is optional. If omitted, the cmd only prints the peer ID and your information. If provided, the nickname will be updated
2. check your direct multiaddrs for sharing:
```bash
aqua serve --dryrun
```
this command will print the multiaddrs that your peer is listening on, which usually includes local network addresses (e.g., `/ip4/192.168.x.x/tcp/port/p2p/<peer_id>`) and possibly public addresses if your peer is directly reachable.
3. Start serve for listening and message handling:
```bash
aqua serve
```
If you can't run `serve` cmd as a background process, you can use `nohup` or `systemd` or similar tools to manage the process lifecycle in environments.
4. Send a contact invite using the other's address and include one of your own dialable addresses:
```bash
aqua contacts invite "<TARGET_PEER_ADDR>" --address "<YOUR_PEER_ADDR>" --verify
```
* `--verify` is only recommended for trust establishment, but requires out-of-band confirmation of the peer's identity. If accepted, both contacts become `verified`. Omit `--verify` to establish `tofu`.
* `<TARGET_PEER_ADDR>` is other's direct address. Could be printed by `serve --dryrun`.
* `<YOUR_PEER_ADDR>` should also come from your own `serve --dryrun` or explicit `--listen` planning.
5. On the receiver side, inspect and accept the pending invite:
```bash
aqua contacts invites
aqua contacts invite accept <REQUESTER_PEER_ID> --address "<YOUR_PEER_ADDR>"
```
6. Send:
```bash
aqua send <PEER_ID> "hello"
```
7. Check unread messages:
```bash
aqua inbox list --unread
aqua inbox watch --once --mark-read --json
```
## Sending Message Operations
Send message:
```bash
aqua send <PEER_ID> "message content"
```
Use explicit topic/content type when needed:
```bash
aqua send <PEER_ID> "{\"event\":\"greeting\"}" \
--content-type application/json
```
Reply threading metadata (optional):
```bash
aqua send <PEER_ID> "reply text" --reply-to <MESSAGE_ID>
```
Send message in a session (optional, for dialogue semantics):
```bash
aqua send <PEER_ID> "message content" --session-id <SESSION_ID>
```
## Group Operations
Create and inspect groups:
```bash
aqua group create --json
aqua group list --json
aqua group show <GROUP_ID> --json
```
Manage invites and membership:
```bash
aqua group invite <GROUP_ID> <PEER_ID> --json
aqua group invites --json
aqua group invite accept <GROUP_ID> --json
aqua group invite reject <GROUP_ID> --json
```
Send a group message:
```bash
aqua group send <GROUP_ID> "hello group" --json
```
Notes:
- `aqua group invite` now creates a local pending invite and also delivers it over Aqua transport by default.
- Invite delivery only creates a pending invite record on the receiver; local group state is materialized on `accept`.
- Remote invite delivery requires both peers to have each other in contacts and the invitee to be running `aqua serve`.
- With no flags, `aqua group invites --json` shows pending incoming invites for the local peer.
- `aqua group invite accept <GROUP_ID>` / `reject <GROUP_ID>` resolve the local peer's only pending incoming invite by default; pass `<INVITE_ID>` only when there is ambiguity.
- `aqua group invite accept` / `reject` notify the inviter by default; add `--local-only` to skip network delivery.
- Current `aqua group send` is sender-side fanout to known members.
- Incoming group messages use topic `group.message.v1`.
- For agent mailbox processing, filter group traffic with:
``토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
GitHub 정보
- GitHub 스타
- 259
- 제작자
- quailyquaily
- 라이선스
- Apache-2.0
- 최근 코드 수정
- 2026년 3월 24일
- repo 안 SKILL.md(번역본과 템플릿 포함)
- 1
- 토픽
- agent-skills, agent-tools, ai-agents