ต้นแบบ · รุ่นทดลอง: มีทุก server ในทะเบียนทางการ อัปเดตทุก 30 นาที เข้าสู่ระบบด้วย Google เพื่อเขียนรีวิวได้แล้วต้นแบบ · อัปเดตทุก 30 นาที
PopNx MCPที่รวม MCP สำหรับคนใช้ AI · วิธีติดตั้งภาษาไทยทุกตัว

UVC PTZ Camera

โดย AbhijatSaxenaรุ่น 0.2.0i★ 0iรันบนเครื่องหน้า repo ↗
ชื่อใน registryio.github.AbhijatSaxena/uvc-ptz-camera-mcp

วิธีติดตั้ง

ใช้ทำอะไรได้

ยังไม่มีคำอธิบายภาษาไทย ดูข้อเท็จจริงด้านล่าง หรือเปิดคำอธิบายต้นฉบับจากผู้ทำ

  • ต่อแบบ ติดตั้งในเครื่อง
  • บัญชีหรือคีย์ ไม่ต้องใส่คีย์
  • หมวด อื่น ๆ
คำอธิบายต้นฉบับจากผู้ทำ (อังกฤษ)
Control a USB (UVC) pan/tilt/zoom camera, with every move confirmed from the picture.

ทำไมอยู่อันดับนี้

หน้ารายการเรียงด้วยคะแนนการใช้งาน (เต็ม 100) จากส่วนเหล่านี้

ความนิยม0/80ดาว GitHub หรือยอดดาวน์โหลดต่อสัปดาห์ ค่ามากนับ 60 ค่าน้อยนับ 20
ความสด7/12ออกรุ่นหรือแก้โค้ดใน 30 วัน ได้เต็ม
ระบบยังตอบ0/8endpoint บนคลาวด์ตอบตอนตรวจล่าสุด
คะแนนการใช้งาน7/100

คุณภาพ: ผลตรวจเบื้องต้นผ่าน 3/3 ข้อ (แสดงให้ดู ไม่ได้ใช้เรียง) · ความมาแรง: ยังไม่มีข้อมูล (ใช้เรียงเฉพาะแท็บมาแรง)

ติดตั้ง

เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง

ให้ AI ติดตั้งให้ด้วยประโยคเดียว

ติดตั้ง UVC PTZ Camera ให้หน่อย ทำตาม https://mcp.popnx.com/i/abhijatsaxena-uvc-ptz-camera-mcp.md แสดงคำสั่งให้ฉันดูและรอฉันตกลงก่อนรัน

คัดลอกไปวางในแชตของ AI ที่ทำงานในเครื่องคุณได้ (เช่น Claude Code, Cursor) · AI จะอ่านขั้นตอนจากเรา แสดงคำสั่งให้ดู และรอคุณตกลงก่อน · ไม่ต้องใช้คีย์ ไม่ต้องสมัคร · ดูข้อความเต็มที่ AI จะอ่าน

ผลตรวจผ่าน 3/3 · ทำงานบนเครื่องคุณ · ✓ ตรวจคำสั่งแล้ว 14 พ.ย. 2569

ขั้นแรก: คุณใช้ AI ตัวไหน

เลือกแอปที่คุณใช้ ขั้นตอนจะขึ้นด้านล่าง

ต่อกับ Claude ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว) · ใช้ได้เฉพาะแอป Claude บนคอม (Windows หรือ Mac) ไม่ใช่บนเว็บหรือมือถือ

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Claude AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ UVC PTZ Camera ให้ Claude ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "mcpServers": { "uvc-ptz-camera": { "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ UVC PTZ Camera ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. เปิดไฟล์ตั้งค่าของแอป Claude บนคอม

    SettingsDeveloperEdit Config

  3. วางค่าตั้งนี้แล้วบันทึกไฟล์

    {
      "mcpServers": {
        "uvc-ptz-camera": {
          "command": "uvx",
          "args": [
            "uvc-ptz-camera-mcp"
          ]
        }
      }
    }
  4. ปิดแอป Claude แล้วเปิดใหม่

  5. ลองเลย

    ใช้ UVC PTZ Camera บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Claude บอกว่ากำลังใช้ UVC PTZ Camera หรือมีชื่อเครื่องมือของ UVC PTZ Camera ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 2 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • UVC_PTZ_STATE_DIR ที่เก็บข้อมูลที่เรียนรู้เกี่ยวกับกล้องแต่ละตัว ค่าเริ่มต้นคือ /.uvc-ptz-camera-mcp เก็บเฉพาะมุมต่างๆ ไม่เก็บข้อมูลรับรองการเข้าสู่ระบบ
    ดูต้นฉบับภาษาอังกฤษWhere to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE พาธไปยังภาพที่จะใช้เป็นภาพพาโนรามาของซิมูเลเตอร์แทนภาพที่สร้างขึ้นเอง
    ดูต้นฉบับภาษาอังกฤษPath to an image to use as the simulator's panorama instead of the synthesised one.

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Anthropic เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ChatGPT ยังต่อ UVC PTZ Camera ไม่ได้

UVC PTZ Camera ต้องติดตั้งในเครื่องคุณ แต่ ChatGPT ต่อได้เฉพาะตัวที่ทำงานบนเว็บ

คุณทำแบบนี้แทนได้

ก · ใช้แอปที่ต่อ UVC PTZ Camera ได้

  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว) · ใช้ได้เฉพาะแอป Claude บนคอม (Windows หรือ Mac) ไม่ใช่บนเว็บหรือมือถือ
  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)
  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)
  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ข · ตัวอื่นในหมวด อื่น ๆ ที่ต่อกับ ChatGPT ได้

เลือกจากตัวที่ใช้มากในหมวดเดียวกัน เฉพาะตัวที่ต่อด้วยที่อยู่ได้โดยไม่ต้องใส่คีย์

ต่อกับ Claude Code ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Claude Code AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ UVC PTZ Camera ให้ Claude Code ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ UVC PTZ Camera ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. เปิด Terminal

    Mac: กด Command+Space พิมพ์ Terminal · Windows: เปิด PowerShell

  3. วางคำสั่งนี้แล้วกด Enter

    claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp
  4. พิมพ์ /mcp ใน Claude Code

    ต้องเห็น UVC PTZ Camera ในรายการและขึ้นว่าเชื่อมต่อแล้ว

  5. ลองเลย

    ใช้ UVC PTZ Camera บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Claude Code บอกว่ากำลังใช้ UVC PTZ Camera หรือมีชื่อเครื่องมือของ UVC PTZ Camera ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 2 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • UVC_PTZ_STATE_DIR ที่เก็บข้อมูลที่เรียนรู้เกี่ยวกับกล้องแต่ละตัว ค่าเริ่มต้นคือ /.uvc-ptz-camera-mcp เก็บเฉพาะมุมต่างๆ ไม่เก็บข้อมูลรับรองการเข้าสู่ระบบ
    ดูต้นฉบับภาษาอังกฤษWhere to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE พาธไปยังภาพที่จะใช้เป็นภาพพาโนรามาของซิมูเลเตอร์แทนภาพที่สร้างขึ้นเอง
    ดูต้นฉบับภาษาอังกฤษPath to an image to use as the simulator's panorama instead of the synthesised one.

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Anthropic เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ต่อกับ Cursor ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Cursor AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ UVC PTZ Camera ให้ Cursor ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "mcpServers": { "uvc-ptz-camera": { "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ UVC PTZ Camera ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. กดปุ่มนี้เพื่อเปิด Cursor

    เปิดใน Cursor

    Cursor จะถามยืนยันการติดตั้ง ให้กด Install

  3. เปิดแชตของ AI ใน Cursor โหมด Agent

  4. ลองเลย

    ใช้ UVC PTZ Camera บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Cursor บอกว่ากำลังใช้ UVC PTZ Camera หรือมีชื่อเครื่องมือของ UVC PTZ Camera ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 2 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • UVC_PTZ_STATE_DIR ที่เก็บข้อมูลที่เรียนรู้เกี่ยวกับกล้องแต่ละตัว ค่าเริ่มต้นคือ /.uvc-ptz-camera-mcp เก็บเฉพาะมุมต่างๆ ไม่เก็บข้อมูลรับรองการเข้าสู่ระบบ
    ดูต้นฉบับภาษาอังกฤษWhere to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE พาธไปยังภาพที่จะใช้เป็นภาพพาโนรามาของซิมูเลเตอร์แทนภาพที่สร้างขึ้นเอง
    ดูต้นฉบับภาษาอังกฤษPath to an image to use as the simulator's panorama instead of the synthesised one.

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Cursor เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ต่อกับ VS Code ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ VS Code AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ UVC PTZ Camera ให้ VS Code ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "servers": { "uvc-ptz-camera": { "type": "stdio", "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ UVC PTZ Camera ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. กดปุ่มนี้เพื่อเปิด VS Code

    เปิดใน VS Code

    VS Code จะถามยืนยันการติดตั้ง ให้กด Install

  3. เปิดแชตของ AI ใน VS Code โหมด Agent

  4. ลองเลย

    ใช้ UVC PTZ Camera บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า VS Code บอกว่ากำลังใช้ UVC PTZ Camera หรือมีชื่อเครื่องมือของ UVC PTZ Camera ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 2 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • UVC_PTZ_STATE_DIR ที่เก็บข้อมูลที่เรียนรู้เกี่ยวกับกล้องแต่ละตัว ค่าเริ่มต้นคือ /.uvc-ptz-camera-mcp เก็บเฉพาะมุมต่างๆ ไม่เก็บข้อมูลรับรองการเข้าสู่ระบบ
    ดูต้นฉบับภาษาอังกฤษWhere to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE พาธไปยังภาพที่จะใช้เป็นภาพพาโนรามาของซิมูเลเตอร์แทนภาพที่สร้างขึ้นเอง
    ดูต้นฉบับภาษาอังกฤษPath to an image to use as the simulator's panorama instead of the synthesised one.

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ VS Code เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

โปรแกรมอื่นที่ใช้ MCP ได้ เช่น Windsurf, Zed หรือ Gemini CLI มีวิธีเพิ่มต่างกัน ดูวิธีของแต่ละตัวในหน้ารวมโปรแกรม

ดูโปรแกรมที่ใช้ MCP ทั้งหมด →

ค่าตั้งแบบไฟล์ JSON อยู่ในหัวข้อ “สำหรับคนเขียนโค้ด” ด้านล่าง

ติดตรงไหน? ถามคนที่ใช้ UVC PTZ Camera อยู่💬 พูดคุย →
สำหรับคนเขียนโค้ด: คำสั่ง Terminal และค่าตั้ง JSON

ติดตั้งในเครื่อง

Claude Code

claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "uvc-ptz-camera": {
      "command": "uvx",
      "args": [
        "uvc-ptz-camera-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "uvc-ptz-camera": {
      "command": "uvx",
      "args": [
        "uvc-ptz-camera-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "uvc-ptz-camera": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "uvc-ptz-camera-mcp"
      ]
    }
  }
}

ค่าที่ต้องใส่เอง

  • UVC_PTZ_STATE_DIR env
    ที่เก็บข้อมูลที่เรียนรู้เกี่ยวกับกล้องแต่ละตัว ค่าเริ่มต้นคือ /.uvc-ptz-camera-mcp เก็บเฉพาะมุมต่างๆ ไม่เก็บข้อมูลรับรองการเข้าสู่ระบบ
    ดูต้นฉบับภาษาอังกฤษWhere to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE env
    พาธไปยังภาพที่จะใช้เป็นภาพพาโนรามาของซิมูเลเตอร์แทนภาพที่สร้างขึ้นเอง
    ดูต้นฉบับภาษาอังกฤษPath to an image to use as the simulator's panorama instead of the synthesised one.

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ค่าตั้งนี้สร้างจากข้อมูลใน registry ของผู้ทำ ถ้าไม่ตรงกับ README ให้เชื่อ README

สรุป

ดาวน์โหลดต่อสัปดาห์i
82/สัปดาห์
การเชื่อมต่อ
รันบนเครื่อง
รุ่นล่าสุดi
0.2.0
หมวดi
อื่น ๆ
ส่งเข้า registryi
8 ต.ค. 2569
แก้โค้ดล่าสุดi
8 ต.ค. 2569
ผู้ทำ
AbhijatSaxena
แพ็กเกจ
pypi: uvc-ptz-camera-mcp
เว็บผู้ทำ
github.com
สถานะใน registry
ใช้งานอยู่

ใช้กับโปรแกรมไหนได้

ดูจากแบบการต่อของ server ตัวนี้ และเอกสารของผู้ทำโปรแกรมแต่ละตัว ตรวจเมื่อ 10 พ.ย. 2569

ติดตั้งบนเครื่องได้ใน

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

ดูโปรแกรมทั้งหมดพร้อมข้อดีข้อเสีย →

คู่มือที่เกี่ยวข้อง

ทำอะไรได้บ้าง

รันในเครื่องคุณ รายการเครื่องมือจะขึ้นในแอป AI หลังติดตั้ง

ผลตรวจเบื้องต้นi

เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 19 พ.ย. 2569

  • ✓ ผ่าน

    ตัวตนผู้ทำตรงกับ repo

    ชื่อใน registry ยืนยันด้วยบัญชี GitHub AbhijatSaxena ซึ่งเป็นเจ้าของ repo

  • ✓ ผ่าน

    ยังมีคนดูแล

    มีการแก้โค้ดล่าสุด 42 วันที่ผ่านมา

  • ✓ ผ่าน

    มีสัญญาอนุญาต (license)

    ใช้ MIT

  • – ไม่เกี่ยว

    endpoint ตอบ

    ตัวนี้รันบนเครื่องคุณ ไม่มี endpoint บนอินเทอร์เน็ต

  • – ไม่เกี่ยว

    ล็อกอินแบบ OAuth

    ตัวนี้รันบนเครื่อง ใช้ค่าที่ตั้งในเครื่องแทน

  • … ยังไม่ตรวจ

    คำอธิบายเครื่องมือไม่มีคำสั่งแอบแฝง

    รันในเครื่องคุณ เราอ่านรายการเครื่องมือได้เฉพาะตัวที่มี endpoint บนอินเทอร์เน็ต

ช่องโหว่ที่เปิดเผยแล้ว (OSV.dev)

ไม่พบรายการใน OSV.dev สำหรับ uvc-ptz-camera-mcp@0.2.0

ตรวจเฉพาะตัวแพ็กเกจรุ่นนี้ ไม่ใช่ทุก dependency · ตรวจเมื่อ 16 พ.ย. 2569

เราตรวจอะไรบ้าง → · JSON

ผู้ทำ: ขอให้ตรวจใหม่ หรือแจ้งข้อมูลผิด
สำหรับผู้ทำ: ติดป้ายใน README

ถ้าคุณเป็นผู้ทำตัวนี้ คัดลอกโค้ดนี้ไปวางใน README ได้เลย ป้ายลิงก์กลับมาที่หน้านี้

[![แนะนำบน PopNx MCP](https://mcp.popnx.com/badge/abhijatsaxena-uvc-ptz-camera-mcp.svg?lang=th)](https://mcp.popnx.com/th/servers/abhijatsaxena-uvc-ptz-camera-mcp)

พูดคุย

ถาม แชร์เคล็ดลับ หรือแจ้งว่าใช้ไม่ได้ เรียงตามที่คนกดว่ามีประโยชน์

ยังไม่มีใครโพสต์ ถามหรือแชร์เป็นคนแรกได้เลย

ข้อความในส่วนนี้เขียนโดยผู้ใช้ ไม่ใช่ทีม PopNx

เข้าสู่ระบบเพื่อโพสต์

รีวิวจากผู้ใช้

ยังไม่มีรีวิว

เข้าสู่ระบบเพื่อเขียนรีวิว

เทียบกับตัวอื่นในหมวด อื่น ๆi

  • ดาวมากกว่า 0% ของอีก 20693 ตัวในหมวดนี้
  • ส่งรุ่นใหม่เข้า registry ล่าสุดกว่า 51% ของอีก 20693 ตัวในหมวดนี้
  • ผลตรวจเบื้องต้นดีกว่าหรือเท่ากับ 99% ของอีก 20693 ตัวในหมวดนี้

เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo

คำถามที่พบบ่อย

UVC PTZ Camera ปลอดภัยไหม?

จากการตรวจเบื้องต้นของเรา ผ่าน 3 จาก 3 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น

ต้องใช้กุญแจหรือรหัสอะไรบ้าง?

registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก

ตัวนี้รันบนเครื่องหรือบนคลาวด์?

รันบนเครื่องของคุณ โปรแกรม AI จะเปิด server ขึ้นมาเองเมื่อใช้ ข้อมูลไม่ต้องผ่านเซิร์ฟเวอร์ของผู้ทำ (ยกเว้นตัวที่ไปเรียกบริการออนไลน์ต่อ)

ยังมีคนดูแลอยู่ไหม?

repo บน GitHub มีการแก้โค้ดล่าสุด 42 วันที่ผ่านมา และส่งรุ่นล่าสุด (0.2.0) เข้า registry 42 วันที่ผ่านมา

ใช้กับโปรแกรมไหนได้บ้าง?

โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code ตัวนี้ต้องมี Python (uv) ในเครื่องด้วย

มีตัวไหนใช้แทนได้บ้าง?

ในหมวดเดียวกันมี World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

ตัวอื่นที่ทำงานคล้ายกัน

หมวดเดียวกันจากผู้ทำคนอื่น ผ่านตัวตรวจคำสั่งแล้ว ตัวทางการขึ้นก่อน แล้วเรียงตามดาว

อ่านการ์ด:↓ ดาวน์โหลดต่อสัปดาห์i★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi

World Monitor

ข่าวกรองโลกแบบเรียลไทม์: ความขัดแย้ง ตลาด พลังงาน การค้า การขนส่ง และไซเบอร์

โดย koala73ใช้กันมาก★ 90.9Kอัปเดต 3 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

โดย openstatusHQใช้กันมาก★ 9.3Kอัปเดต 2 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · openstatus.dev

Oh My Posh Validator

Validate oh-my-posh configurations and segment snippets against the official schema.

โดย JanDeDobbeleerใช้กันมาก★ 23.8K ดาวรวมทั้งรีโปอัปเดต 30 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · ohmyposh.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

โดย Klavis-AIกำลังโต★ 5.8Kอัปเดต 14 เดือนที่ผ่านมา

รันบนคลาวด์repo ถูกเก็บถาวร✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

โดย jitsucomใช้กันมาก★ 5.1Kอัปเดต 4 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · jitsu.com
เทียบกับตัวที่คล้ายกัน
ตัวนี้
UVC PTZ Camera
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
ทำงานที่ไหนต้องลงในเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่อง
ต้องใส่คีย์ไม่ไม่ไม่ไม่ไม่ไม่
กด + ใน Claude ได้ไม่ไม่ไม่ไม่ไม่ไม่
ผลตรวจเบื้องต้น3/34/44/44/41/44/4
สัญญาอนุญาตMITAGPL-3.0AGPL-3.0MITApache-2.0MIT
ราคาไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียน

README จากผู้ทำ

เปิดอ่าน README

ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ

uvc-ptz-camera-mcp

An MCP server for USB (UVC) pan/tilt/zoom cameras: aim them, nudge them, sweep them smoothly, zoom, and look through them — with every move confirmed by comparing the picture before and after.

No account, no cloud, no vendor SDK. One device, one USB cable.

camera_status       the camera, its axes and ranges, and whether it is real

aim point an axis at an absolute value, confirmed from the picture nudge move relative to where the device says it is sweep a smooth timed move, streamed at 15 Hz zoom set zoom as a multiplier (1x .. the camera's maximum) recentre every axis back to its default look one frame, returned as an image aim_learn remember "this direction is the desk" aim_list what has been recorded for this camera go_to point at a recorded direction plan_shot compile a multi-step shot and report what it would do, moving nothing run_shot execute a multi-step move, verified after every waypoint mark_view store the current picture under a label check_view has the picture changed since that label? track_start follow a subject: detect, measure, take a step, look again track_status what the follow loop is doing, iteration by iteration track_stop stop following and report what it saw and what it moved

Composing a shot is plan_shot then run_shot. Planning compiles exactly the steps the executor will compile, reports the per-step schedule, how far each axis travels and how long it takes, and touches nothing — so an agent can iterate on "a panorama, then zoom in on me" against the camera's real ranges *before* anything moves, instead of finding out afterwards.

Following

track_start runs a loop that keeps the camera pointed at a subject: detect it, measure how far it is from the centre of the frame, take a bounded step, look again. It decides only from the picture, for the same reason every other move here does — this camera's own report of where it is pointing cannot be trusted. It stops on its own when the subject is lost, when it settles inside the dead zone, when the camera stops answering, or after max_seconds, and track_status lists every iteration with the offset it measured and the step it applied.

Two quantities are *mount*-dependent rather than device-dependent, so they are explicit parameters instead of clever guesses: gain, degrees of movement per pixel of offset, and invert, which flips the direction. A wrong choice shows up honestly as a residual error that grows, and a single iteration is capped at 25 degrees, so a wrong gain converges slowly rather than throwing the camera across its whole range in one command.

Detection uses OpenCV's bundled face cascade (pip install 'uvc-ptz-camera-mcp[tracking]'), which needs no model download, no account and no network at first use. It finds faces: this follows a person, not a car or a dog. The loop and its arithmetic are tested against the simulator, but no part of follow mode has ever run against real hardware — treat it as the least proven thing here.

Why this exists

This class of camera reports positions it never moved to. Measured on the reference device (a DJI Osmo Pocket 4P in webcam mode, over its standard UVC controls):

  • a command to pan to 180 read back `180` while the video proved the camera had not moved at all;
  • a whole 32-second run read back 0 on every sample while the frame demonstrably changed;
  • pan 120 read back 119, pan 200 read back 199.

An agent acting on those values reports moves that never happened. So this server treats every device-reported value as a hint — returned, labelled, never trusted — and decides moved by comparing frames.

The threshold is not a guess either. It was calibrated on labelled hardware frames: every "same view" pair scored ≤ 0.104 (a 96-second quiet baseline, and two commands the hardware ignored), every "view changed" pair scored ≥ 0.624 (a pan, a tilt, a 12× zoom, two aim steps). The shipped threshold is the midpoint, 0.364 — a 6× separation — and the test suite asserts it still separates them. The labelled pairs and the values the metric produced are kept in the repository (tests/fixtures/) so the number can be re-checked rather than believed — as measurements, not pictures: no frame or video taken by a camera is committed here, and a test fails if one appears. The measurements behind the calibration are in docs/measurements.md.

What keeps the agent honest

  • `moved` comes from the picture. device_reported is returned beside it, labelled a hint.
  • A move that produced no change is an error, not a quiet success — after a bounded retry, the tool fails naming what was requested and what was observed.
  • Already being at the target is success without movement: moved: false, no error.
  • Blocking work never runs on the event loop (COM calls, ffmpeg captures), pinned by a test that records which thread the camera was touched on.
  • Observation is explicit: nothing takes a picture except a tool you called.
  • A refused write aborts a shot rather than continuing to drive a camera that stopped listening.

Install

uvx uvc-ptz-camera-mcp            # run without installing

pip install uvc-ptz-camera-mcp # or install it

For a real camera on Windows you also need the DirectShow extras:

pip install "uvc-ptz-camera-mcp[dshow]"

Then point your host at it — --print-config emits the snippet with the right interpreter:

uvc-ptz-mcp --print-config

uvc-ptz-mcp --list-devices # what to pass to --device uvc-ptz-mcp --backend simulator # try it with no camera attached

Where to put it

Claude Desktop, Cursor, VS Code and friends all take the same shape — this is the whole configuration, because there is nothing to authenticate:

{

"mcpServers": { "ptz-camera": { "command": "uvx", "args": ["uvc-ptz-camera-mcp"] } } }

Add "--device", "Osmo" (any substring of the name --list-devices prints) when the machine has more than one camera, and "--backend", "simulator" to work with none. Both can also be set in the environment instead of the args — UVC_PTZ_DEVICE, UVC_PTZ_BACKEND and UVC_PTZ_STATE_DIR — which is what the Claude Desktop bundle uses, and which survives a host restart without editing its config again. A flag wins over the environment, and an empty value means "not set" (a host that leaves an option blank writes "", not nothing). Claude Desktop also accepts the .mcpb bundle attached to each release as a one-click install.

Modes, and how you can tell which one you are in

BackendWhat it is
auto (default)Prefer a real camera; fall back to the simulator, saying why
dshowWindows DirectShow: the real device path
simulatorNo hardware at all: a model calibrated from the measurements below

Every result carries "simulated": true or false, and camera_status reports the reason when the simulator is standing in. Nothing quietly pretends to be hardware: a caller must never believe it is driving a camera when it is driving a model.

The simulator is calibrated from the reference device, not invented: ~0.4 s from write to first motion, a pan completing in about a second, a 4× zoom in about 2.5 s, silently dropped writes, and a read-back that echoes a request the hardware never applied. It renders frames by cropping a wide panorama, so a simulated pan genuinely changes the pixels — a simulator with a static picture would let verification pass vacuously.

Honest limitations

  • The real-device path is Windows-only (DirectShow). A Linux backend would use v4l2; the interface is in place, the implementation is not written.
  • No exposure, focus or white balance. The reference camera exposes no Processing Unit at all — only pan/tilt/roll/zoom.
  • The vendor Extension Unit is unreachable on Windows, so features that live there (on the reference camera, its built-in subject tracking) cannot be driven from software. Measured: IKsControl is refused on the device filter, IKsTopologyInfo lists three nodes and no vendor node, and CreateNodeInstance fails on all of them. Linux can reach it through uvcvideo's UVCIOC_CTRL_QUERY; that is a separate backend.
  • A moving subject looks like a moving camera. Frame comparison cannot tell the two apart; the metric is calibrated so that a static scene behaves, and check_view is there for judging a view rather than a move.
  • One unusable device must not hide the others. A registered-but-unavailable virtual camera raised when its DirectShow moniker was bound, which aborted a listing that should have returned two working cameras. Enumeration now skips what it cannot load and says so, and the same rule applies inside the backend when it looks for the camera you named.
  • Measured latency sets the ceiling: ~0.4 s from command to motion, so control loops run at a couple of hertz, not tens. That is the hardware's floor, not the software's.
  • The DirectShow path is tested but dormant. The reference device was returned partway through development, so the hardware path is exercised up to its interface and typed correctly against it, while the simulator carries the test load. Treat the first run against a real camera as the true acceptance test.

Development

pip install -e ".[dshow]" numpy pytest pytest-asyncio ruff

python -m pytest -q # 39 tests, three layers python -m ruff check . && python -m ruff format --check .

The suite is layered deliberately: the tool surface in-process against the simulator (mapping, validation, honest failure), pure unit tests for the compiler and the metric, and a real stdio handshake as a subprocess — including one run with a device name that cannot exist, because a server that dies at startup is invisible to every host and directory that lists it.

Reference device

Built against a DJI Osmo Pocket 4P in webcam mode: VID_2CA3 / PID_0023, exposing pan −38…215°, tilt −33…105°, roll ±35°, zoom 100…1200 (1×–12×) as standard UVC camera controls. Any UVC PTZ camera exposes the same surface; the ranges are read from the device at startup rather than assumed, and nothing vendor-specific is hard-coded.

Not affiliated with, endorsed by, or supported by DJI.