ต้นแบบ · รุ่นทดลอง: มีทุก server ในทะเบียนทางการ อัปเดตทุก 30 นาที เข้าสู่ระบบด้วย Google เพื่อเขียนรีวิวได้แล้วต้นแบบ · อัปเดตทุก 30 นาที
PopNx MCPที่รวม MCP สำหรับคนใช้ AI · วิธีติดตั้งภาษาไทยทุกตัว

SRS Residual Gas Analyzer

โดย K-Dense-AIรุ่น 0.1.1i★ 32 (ดาวรวมทั้งรีโป)iรันบนเครื่องหน้า repo ↗
ชื่อใน registryio.github.K-Dense-AI/labmcp-srs-rga

วิธีติดตั้ง

ใช้ทำอะไรได้

ยังไม่มีคำอธิบายภาษาไทย ดูข้อเท็จจริงด้านล่าง หรือเปิดคำอธิบายต้นฉบับจากผู้ทำ

  • ต่อแบบ ติดตั้งในเครื่อง
  • บัญชีหรือคีย์ ไม่ต้องใส่คีย์
  • หมวด อื่น ๆ
คำอธิบายต้นฉบับจากผู้ทำ (อังกฤษ)
MCP server for SRS RGA100/200/300 residual gas analyzers.

ทำไมอยู่อันดับนี้

หน้ารายการเรียงด้วยคะแนนการใช้งาน (เต็ม 100) จากส่วนเหล่านี้

ความนิยม0/80ดาว GitHub หรือยอดดาวน์โหลดต่อสัปดาห์ ค่ามากนับ 60 ค่าน้อยนับ 20
ความสด7/12ออกรุ่นหรือแก้โค้ดใน 30 วัน ได้เต็ม
ระบบยังตอบ0/8endpoint บนคลาวด์ตอบตอนตรวจล่าสุด
คะแนนการใช้งาน7/100

คุณภาพ: ผลตรวจเบื้องต้นผ่าน 3/3 ข้อ (แสดงให้ดู ไม่ได้ใช้เรียง) · ความมาแรง: ยังไม่มีข้อมูล (ใช้เรียงเฉพาะแท็บมาแรง)

ติดตั้ง

เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง

ให้ AI ติดตั้งให้ด้วยประโยคเดียว

ติดตั้ง SRS Residual Gas Analyzer ให้หน่อย ทำตาม https://mcp.popnx.com/i/k-dense-ai-labmcp-srs-rga.md แสดงคำสั่งให้ฉันดูและรอฉันตกลงก่อนรัน

คัดลอกไปวางในแชตของ AI ที่ทำงานในเครื่องคุณได้ (เช่น Claude Code, Cursor) · AI จะอ่านขั้นตอนจากเรา แสดงคำสั่งให้ดู และรอคุณตกลงก่อน · ไม่ต้องใช้คีย์ ไม่ต้องสมัคร · ดูข้อความเต็มที่ AI จะอ่าน

ผลตรวจผ่าน 3/3 · ทำงานบนเครื่องคุณ · ✓ ตรวจคำสั่งแล้ว 14 พ.ย. 2569

ขั้นแรก: คุณใช้ AI ตัวไหน

เลือกแอปที่คุณใช้ ขั้นตอนจะขึ้นด้านล่าง

ต่อกับ Claude ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว) · ใช้ได้เฉพาะแอป Claude บนคอม (Windows หรือ Mac) ไม่ใช่บนเว็บหรือมือถือ

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Claude AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ SRS Residual Gas Analyzer ให้ Claude ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ SRS Residual Gas Analyzer ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. เปิดไฟล์ตั้งค่าของแอป Claude บนคอม

    SettingsDeveloperEdit Config

  3. วางค่าตั้งนี้แล้วบันทึกไฟล์

    {
      "mcpServers": {
        "labmcp-srs-rga": {
          "command": "uvx",
          "args": [
            "labmcp-srs-rga"
          ]
        }
      }
    }
  4. ปิดแอป Claude แล้วเปิดใหม่

  5. ลองเลย

    ใช้ SRS Residual Gas Analyzer บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Claude บอกว่ากำลังใช้ SRS Residual Gas Analyzer หรือมีชื่อเครื่องมือของ SRS Residual Gas Analyzer ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 4 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • LABMCP_ADDRESS ที่อยู่ของเครื่องมือวัด เช่น serial:///dev/ttyUSB0 หรือ tcp://192.168.1.50:5025
    ดูต้นฉบับภาษาอังกฤษInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE ตั้งเป็น 1 เพื่อใช้ตัวจำลองในตัว (ไม่ต้องใช้ฮาร์ดแวร์)
    ดูต้นฉบับภาษาอังกฤษSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY ตั้งเป็น 1 เพื่อปิดการใช้งานเครื่องมือทั้งหมดที่เปลี่ยนแปลงสถานะ
    ดูต้นฉบับภาษาอังกฤษSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS การแทนที่ค่าขีดจำกัดความปลอดภัย เช่น max_temperature_c=80
    ดูต้นฉบับภาษาอังกฤษSafety limit overrides, e.g. max_temperature_c=80

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Anthropic เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ChatGPT ยังต่อ SRS Residual Gas Analyzer ไม่ได้

SRS Residual Gas Analyzer ต้องติดตั้งในเครื่องคุณ แต่ ChatGPT ต่อได้เฉพาะตัวที่ทำงานบนเว็บ

คุณทำแบบนี้แทนได้

ก · ใช้แอปที่ต่อ SRS Residual Gas Analyzer ได้

  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว) · ใช้ได้เฉพาะแอป Claude บนคอม (Windows หรือ Mac) ไม่ใช่บนเว็บหรือมือถือ
  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)
  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)
  • ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ข · ตัวอื่นในหมวด อื่น ๆ ที่ต่อกับ ChatGPT ได้

เลือกจากตัวที่ใช้มากในหมวดเดียวกัน เฉพาะตัวที่ต่อด้วยที่อยู่ได้โดยไม่ต้องใส่คีย์

ต่อกับ Claude Code ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Claude Code AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ SRS Residual Gas Analyzer ให้ Claude Code ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rga 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ SRS Residual Gas Analyzer ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. เปิด Terminal

    Mac: กด Command+Space พิมพ์ Terminal · Windows: เปิด PowerShell

  3. วางคำสั่งนี้แล้วกด Enter

    claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rga
  4. พิมพ์ /mcp ใน Claude Code

    ต้องเห็น SRS Residual Gas Analyzer ในรายการและขึ้นว่าเชื่อมต่อแล้ว

  5. ลองเลย

    ใช้ SRS Residual Gas Analyzer บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Claude Code บอกว่ากำลังใช้ SRS Residual Gas Analyzer หรือมีชื่อเครื่องมือของ SRS Residual Gas Analyzer ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 4 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • LABMCP_ADDRESS ที่อยู่ของเครื่องมือวัด เช่น serial:///dev/ttyUSB0 หรือ tcp://192.168.1.50:5025
    ดูต้นฉบับภาษาอังกฤษInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE ตั้งเป็น 1 เพื่อใช้ตัวจำลองในตัว (ไม่ต้องใช้ฮาร์ดแวร์)
    ดูต้นฉบับภาษาอังกฤษSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY ตั้งเป็น 1 เพื่อปิดการใช้งานเครื่องมือทั้งหมดที่เปลี่ยนแปลงสถานะ
    ดูต้นฉบับภาษาอังกฤษSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS การแทนที่ค่าขีดจำกัดความปลอดภัย เช่น max_temperature_c=80
    ดูต้นฉบับภาษาอังกฤษSafety limit overrides, e.g. max_temperature_c=80

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Anthropic เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ต่อกับ Cursor ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Cursor AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ SRS Residual Gas Analyzer ให้ Cursor ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ SRS Residual Gas Analyzer ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. กดปุ่มนี้เพื่อเปิด Cursor

    เปิดใน Cursor

    Cursor จะถามยืนยันการติดตั้ง ให้กด Install

  3. เปิดแชตของ AI ใน Cursor โหมด Agent

  4. ลองเลย

    ใช้ SRS Residual Gas Analyzer บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Cursor บอกว่ากำลังใช้ SRS Residual Gas Analyzer หรือมีชื่อเครื่องมือของ SRS Residual Gas Analyzer ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 4 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • LABMCP_ADDRESS ที่อยู่ของเครื่องมือวัด เช่น serial:///dev/ttyUSB0 หรือ tcp://192.168.1.50:5025
    ดูต้นฉบับภาษาอังกฤษInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE ตั้งเป็น 1 เพื่อใช้ตัวจำลองในตัว (ไม่ต้องใช้ฮาร์ดแวร์)
    ดูต้นฉบับภาษาอังกฤษSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY ตั้งเป็น 1 เพื่อปิดการใช้งานเครื่องมือทั้งหมดที่เปลี่ยนแปลงสถานะ
    ดูต้นฉบับภาษาอังกฤษSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS การแทนที่ค่าขีดจำกัดความปลอดภัย เช่น max_temperature_c=80
    ดูต้นฉบับภาษาอังกฤษSafety limit overrides, e.g. max_temperature_c=80

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Cursor เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ต่อกับ VS Code ได้ แต่ต้องเตรียมก่อน

ต้องลง Python (uv) ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ VS Code AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ SRS Residual Gas Analyzer ให้ VS Code ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี uv ด้วยคำสั่ง uv --version ถ้าไม่มี ให้บอกฉันไปลงจาก https://docs.astral.sh/uv/getting-started/installation/ ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "servers": { "labmcp-srs-rga": { "type": "stdio", "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ SRS Residual Gas Analyzer ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง uv ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    uv --version
    • ขึ้นเลขรุ่น เช่น uv … = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: uv ไม่มีตัวติดตั้งแบบกดเอง คัดลอกคำสั่งหนึ่งบรรทัดของเครื่องคุณ (macOS หรือ Windows) จากหน้าทางการของ uv ไปวางใน Terminal · ไม่ต้องลง Python แยก uv ดาวน์โหลดให้เองเมื่อต้องใช้

    เปิดหน้าดาวน์โหลด uv ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: uv --version

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ uv

  2. กดปุ่มนี้เพื่อเปิด VS Code

    เปิดใน VS Code

    VS Code จะถามยืนยันการติดตั้ง ให้กด Install

  3. เปิดแชตของ AI ใน VS Code โหมด Agent

  4. ลองเลย

    ใช้ SRS Residual Gas Analyzer บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า VS Code บอกว่ากำลังใช้ SRS Residual Gas Analyzer หรือมีชื่อเครื่องมือของ SRS Residual Gas Analyzer ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ค่าตั้งเพิ่มเติม 4 ช่อง (ไม่ต้องกรอกก็ใช้ได้)

คำสั่งด้านบนใช้ได้เลยโดยไม่ต้องใส่ค่าเหล่านี้ ถ้าอยากปรับค่อยเพิ่มเองตามคำอธิบายของผู้ทำ

  • LABMCP_ADDRESS ที่อยู่ของเครื่องมือวัด เช่น serial:///dev/ttyUSB0 หรือ tcp://192.168.1.50:5025
    ดูต้นฉบับภาษาอังกฤษInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE ตั้งเป็น 1 เพื่อใช้ตัวจำลองในตัว (ไม่ต้องใช้ฮาร์ดแวร์)
    ดูต้นฉบับภาษาอังกฤษSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY ตั้งเป็น 1 เพื่อปิดการใช้งานเครื่องมือทั้งหมดที่เปลี่ยนแปลงสถานะ
    ดูต้นฉบับภาษาอังกฤษSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS การแทนที่ค่าขีดจำกัดความปลอดภัย เช่น max_temperature_c=80
    ดูต้นฉบับภาษาอังกฤษSafety limit overrides, e.g. max_temperature_c=80

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ VS Code เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

โปรแกรมอื่นที่ใช้ MCP ได้ เช่น Windsurf, Zed หรือ Gemini CLI มีวิธีเพิ่มต่างกัน ดูวิธีของแต่ละตัวในหน้ารวมโปรแกรม

ดูโปรแกรมที่ใช้ MCP ทั้งหมด →

ค่าตั้งแบบไฟล์ JSON อยู่ในหัวข้อ “สำหรับคนเขียนโค้ด” ด้านล่าง

ติดตรงไหน? ถามคนที่ใช้ SRS Residual Gas Analyzer อยู่💬 พูดคุย →
สำหรับคนเขียนโค้ด: คำสั่ง Terminal และค่าตั้ง JSON

ติดตั้งในเครื่อง

Claude Code

claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rga

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-srs-rga": {
      "command": "uvx",
      "args": [
        "labmcp-srs-rga"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-srs-rga": {
      "command": "uvx",
      "args": [
        "labmcp-srs-rga"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-srs-rga": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-srs-rga"
      ]
    }
  }
}

ค่าที่ต้องใส่เอง

  • LABMCP_ADDRESS env
    ที่อยู่ของเครื่องมือวัด เช่น serial:///dev/ttyUSB0 หรือ tcp://192.168.1.50:5025
    ดูต้นฉบับภาษาอังกฤษInstrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    ตั้งเป็น 1 เพื่อใช้ตัวจำลองในตัว (ไม่ต้องใช้ฮาร์ดแวร์)
    ดูต้นฉบับภาษาอังกฤษSet to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    ตั้งเป็น 1 เพื่อปิดการใช้งานเครื่องมือทั้งหมดที่เปลี่ยนแปลงสถานะ
    ดูต้นฉบับภาษาอังกฤษSet to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    การแทนที่ค่าขีดจำกัดความปลอดภัย เช่น max_temperature_c=80
    ดูต้นฉบับภาษาอังกฤษSafety limit overrides, e.g. max_temperature_c=80

คำอธิบายแปลอัตโนมัติ ชื่อตัวแปรคงตามต้นฉบับ ถ้าไม่แน่ใจให้ดูต้นฉบับ

ค่าตั้งนี้สร้างจากข้อมูลใน registry ของผู้ทำ ถ้าไม่ตรงกับ README ให้เชื่อ README

สรุป

ดาว GitHubi
32 (ดาวรวมทั้งรีโป)
รีโปนี้มี MCP หลายรายการ ดาวนับในอันดับแค่รายการเดียว
ดาวน์โหลดต่อสัปดาห์i
23/สัปดาห์
licensei
Apache-2.0
การเชื่อมต่อ
รันบนเครื่อง
รุ่นล่าสุดi
0.1.1
หมวดi
อื่น ๆ
ส่งเข้า registryi
27 ก.ย. 2569
แก้โค้ดล่าสุดi
27 ก.ย. 2569
ผู้ทำ
K-Dense-AI
แพ็กเกจ
pypi: labmcp-srs-rga
เว็บผู้ทำ
github.com
สถานะใน registry
ใช้งานอยู่

ใช้กับโปรแกรมไหนได้

ดูจากแบบการต่อของ server ตัวนี้ และเอกสารของผู้ทำโปรแกรมแต่ละตัว ตรวจเมื่อ 10 พ.ย. 2569

ติดตั้งบนเครื่องได้ใน

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

ดูโปรแกรมทั้งหมดพร้อมข้อดีข้อเสีย →

คู่มือที่เกี่ยวข้อง

ทำอะไรได้บ้าง

รันในเครื่องคุณ รายการเครื่องมือจะขึ้นในแอป AI หลังติดตั้ง

ผลตรวจเบื้องต้นi

เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 19 พ.ย. 2569

  • ✓ ผ่าน

    ตัวตนผู้ทำตรงกับ repo

    ชื่อใน registry ยืนยันด้วยบัญชี GitHub K-Dense-AI ซึ่งเป็นเจ้าของ repo

  • ✓ ผ่าน

    ยังมีคนดูแล

    มีการแก้โค้ดล่าสุด 2 เดือนที่ผ่านมา

  • ✓ ผ่าน

    มีสัญญาอนุญาต (license)

    ใช้ Apache-2.0

  • – ไม่เกี่ยว

    endpoint ตอบ

    ตัวนี้รันบนเครื่องคุณ ไม่มี endpoint บนอินเทอร์เน็ต

  • – ไม่เกี่ยว

    ล็อกอินแบบ OAuth

    ตัวนี้รันบนเครื่อง ใช้ค่าที่ตั้งในเครื่องแทน

  • … ยังไม่ตรวจ

    คำอธิบายเครื่องมือไม่มีคำสั่งแอบแฝง

    รันในเครื่องคุณ เราอ่านรายการเครื่องมือได้เฉพาะตัวที่มี endpoint บนอินเทอร์เน็ต

ช่องโหว่ที่เปิดเผยแล้ว (OSV.dev)

ไม่พบรายการใน OSV.dev สำหรับ labmcp-srs-rga@0.1.1

ตรวจเฉพาะตัวแพ็กเกจรุ่นนี้ ไม่ใช่ทุก dependency · ตรวจเมื่อ 16 พ.ย. 2569

เราตรวจอะไรบ้าง → · JSON

ผู้ทำ: ขอให้ตรวจใหม่ หรือแจ้งข้อมูลผิด
สำหรับผู้ทำ: ติดป้ายใน README

ถ้าคุณเป็นผู้ทำตัวนี้ คัดลอกโค้ดนี้ไปวางใน README ได้เลย ป้ายลิงก์กลับมาที่หน้านี้

[![แนะนำบน PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-srs-rga.svg?lang=th)](https://mcp.popnx.com/th/servers/k-dense-ai-labmcp-srs-rga)

พูดคุย

ถาม แชร์เคล็ดลับ หรือแจ้งว่าใช้ไม่ได้ เรียงตามที่คนกดว่ามีประโยชน์

ยังไม่มีใครโพสต์ ถามหรือแชร์เป็นคนแรกได้เลย

ข้อความในส่วนนี้เขียนโดยผู้ใช้ ไม่ใช่ทีม PopNx

เข้าสู่ระบบเพื่อโพสต์

รีวิวจากผู้ใช้

ยังไม่มีรีวิว

เข้าสู่ระบบเพื่อเขียนรีวิว

เทียบกับตัวอื่นในหมวด อื่น ๆi

  • ดาวมากกว่า 0% ของอีก 20693 ตัวในหมวดนี้
  • ส่งรุ่นใหม่เข้า registry ล่าสุดกว่า 45% ของอีก 20693 ตัวในหมวดนี้
  • ผลตรวจเบื้องต้นดีกว่าหรือเท่ากับ 99% ของอีก 20693 ตัวในหมวดนี้

เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo

คำถามที่พบบ่อย

SRS Residual Gas Analyzer ปลอดภัยไหม?

จากการตรวจเบื้องต้นของเรา ผ่าน 3 จาก 3 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น

ต้องใช้กุญแจหรือรหัสอะไรบ้าง?

registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก

ตัวนี้รันบนเครื่องหรือบนคลาวด์?

รันบนเครื่องของคุณ โปรแกรม AI จะเปิด server ขึ้นมาเองเมื่อใช้ ข้อมูลไม่ต้องผ่านเซิร์ฟเวอร์ของผู้ทำ (ยกเว้นตัวที่ไปเรียกบริการออนไลน์ต่อ)

ยังมีคนดูแลอยู่ไหม?

repo บน GitHub มีการแก้โค้ดล่าสุด 2 เดือนที่ผ่านมา และส่งรุ่นล่าสุด (0.1.1) เข้า registry 2 เดือนที่ผ่านมา

ใช้กับโปรแกรมไหนได้บ้าง?

โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code ตัวนี้ต้องมี Python (uv) ในเครื่องด้วย

มีตัวไหนใช้แทนได้บ้าง?

ในหมวดเดียวกันมี World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

ตัวอื่นที่ทำงานคล้ายกัน

หมวดเดียวกันจากผู้ทำคนอื่น ผ่านตัวตรวจคำสั่งแล้ว ตัวทางการขึ้นก่อน แล้วเรียงตามดาว

อ่านการ์ด:↓ ดาวน์โหลดต่อสัปดาห์i★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi

World Monitor

ข่าวกรองโลกแบบเรียลไทม์: ความขัดแย้ง ตลาด พลังงาน การค้า การขนส่ง และไซเบอร์

โดย koala73ใช้กันมาก★ 90.9Kอัปเดต 3 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

โดย openstatusHQใช้กันมาก★ 9.3Kอัปเดต 2 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · openstatus.dev

Oh My Posh Validator

Validate oh-my-posh configurations and segment snippets against the official schema.

โดย JanDeDobbeleerใช้กันมาก★ 23.8K ดาวรวมทั้งรีโปอัปเดต 30 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · ohmyposh.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

โดย Klavis-AIกำลังโต★ 5.8Kอัปเดต 14 เดือนที่ผ่านมา

รันบนคลาวด์repo ถูกเก็บถาวร✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

โดย jitsucomใช้กันมาก★ 5.1Kอัปเดต 4 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · jitsu.com
เทียบกับตัวที่คล้ายกัน
ตัวนี้
SRS Residual Gas Analyzer
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
ทำงานที่ไหนต้องลงในเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่อง
ต้องใส่คีย์ไม่ไม่ไม่ไม่ไม่ไม่
กด + ใน Claude ได้ไม่ไม่ไม่ไม่ไม่ไม่
ผลตรวจเบื้องต้น3/34/44/44/41/44/4
สัญญาอนุญาตApache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
ราคาไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียน

README จากผู้ทำ

เปิดอ่าน README

ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ

SRS Residual Gas Analyzer: MCP Server

Let an AI agent read the residual gas composition of a vacuum system with a Stanford Research Systems RGA100, RGA200 or RGA300 quadrupole mass spectrometer: partial pressures at chosen m/z, analog and histogram spectra, total pressure, helium leak checks and a first-pass identification of the gases (water, hydrogen, nitrogen/CO, oxygen, argon, CO2, hydrocarbons). The filament, the electron multiplier (CDEM) and the ionizer degas are protected by server-side pressure interlocks.

Packagelabmcp-srs-rga
InstrumentsSRS RGA100 (1-100 amu), RGA200 (1-200 amu), RGA300 (1-300 amu), with or without the CDEM option (01)
InterfacesRS-232 (fixed 28,800 baud, 8N1, RTS/CTS), TCP via a serial-to-Ethernet adapter or the SRS RGA Ethernet adapter
ProtocolSRS RGA command set: Operating Manual and Programming Reference, Models RGA100/200/300, Rev. 1.9, chapter 6 "Programming the RGA Head"
Status🧪 simulated: tested against a wire-level simulator, not yet verified on hardware. Report a hardware test

Try it without hardware

uvx labmcp-srs-rga --simulate --check

uvx labmcp-srs-rga --simulate --option scenario=helium_leak # He pulses every 20 s for leak_check uvx labmcp-srs-rga --simulate --option scenario=overpressure # a growing leak trips the filament

The simulator is an RGA200 with a CDEM on an unbaked chamber at ~1e-7 Torr (mostly water, then H2, N2/CO, CO2).

Connect your RGA

  1. Cable: the RGA's electronics box (ECU) has a DB-9 RS-232 port wired as DCE with RTS/CTS hardware handshaking. Use a straight-through cable (or a USB-serial adapter) that carries RTS and CTS. The settings are fixed: 28,800 baud, 8 data bits, no parity, 1 stop bit. The server sets these for you.
  2. Close RGA Windows / RGA Com (only one program can use the port).
  3. Find the port: uvx labmcp ports
  4. Test the connection:
   uvx labmcp-srs-rga --address /dev/ttyUSB0 --check          # Linux

uvx labmcp-srs-rga --address /dev/tty.usbserial-XXXX --check # macOS uvx labmcp-srs-rga --address COM3 --check # Windows uvx labmcp-srs-rga --address tcp://192.168.1.50:4001 --check # raw-TCP serial-to-Ethernet adapter uvx labmcp-srs-rga --address tcp://192.168.1.50:818 --option user=admin --option password=admin --check # SRS RGA Ethernet adapter

   On connection the server sends `ID?` and `IN0` (clear the RGA's buffers and run its hardware self-check). It does not switch anything on.

Add to your MCP client

Claude Code

claude mcp add rga -- uvx labmcp-srs-rga --address /dev/ttyUSB0

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, ...)

{

"mcpServers": { "rga": { "command": "uvx", "args": ["labmcp-srs-rga", "--address", "/dev/ttyUSB0"] } } }

Add --read-only to allow measurements but block switching the filament/CDEM, degassing, calibration and settings changes (the off switches stay available). For other clients, generate the snippet with uvx labmcp config srs-rga --address /dev/ttyUSB0 --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
all_off🛑 safetyPut the RGA in a safe state: abort any degas, CDEM off (HV0), filament off (FL0) and quadrupole RF/DC off (MR0). Use when finished, before venting, or if anything looks wrong. It interrupts a running scan or leak check, and every step is attempted even if an earlier one fails.
analog_scan👁 readRecord an analog mass spectrum (SC1): the quadrupole steps through the mass range and the full peak shapes are returned (downsampled) with a peak list, the total pressure measured at the end of the scan, and optionally the full data as CSV. Use it to check peak positions and to survey unknown gases. Duration depends on the noise floor (e.g. 126 ms/amu at NF4). An existing save_path file is never overwritten.
calibrate⚠️ hazardCalibrate the detector: zero (CA) re-zeroes the ion detector at the present noise floor and detector and corrects the RF scan table for temperature drift (seconds); electrometer (CL) recalibrates the electrometer's full I-V response (longer, clears all zero offsets). The quadrupole RF is switched off at the end.
cdem_off🛑 safetySwitch the electron multiplier off (HV0) and return to Faraday-cup detection. Always allowed, and it interrupts a running scan, mass measurement or leak check.
degas⚠️ hazardStart an ionizer degas (DG): 20 mA of 400 eV electrons clean the ion source by electron stimulated desorption. The CDEM is switched off and left off. Degassing shortens filament life; prefer a bakeout. Refused above max_filament_pressure_torr and beyond max_degas_minutes. Returns immediately; the RGA is busy until it finishes (any command would abort it), and filament_off / all_off stop it.
filament_off🛑 safetySwitch the filament off (FL0), stopping a degas first if one is running. Always allowed, and it interrupts a running scan, mass measurement or leak check.
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_status👁 readReport the RGA state: filament emission, CDEM on/off and voltage, ionizer settings, scan settings, stored sensitivity factors, and the decoded error bytes (e.g. FL6 when the overpressure protection shut the filament down). Reading the error bytes clears the communication (EC?) and CDEM (EM?) error bytes, as on the instrument.
histogram_scan👁 readRecord a bar-graph spectrum (HS1): one peak-locked value per integer m/z plus the total pressure. Faster than an analog scan and the usual way to follow a residual gas composition.
identify_residual_gases👁 readRun a histogram scan and assign the major peaks to likely gases with a simple lookup of standard 70 eV fragment patterns: H2 (2), He (4), CH4 (16/15), H2O (18/17), N2 or CO (28, split with 14 and 12), O2 (32), Ar (40), CO2 (44), plus diagnoses such as an air leak or hydrocarbon contamination. A screening aid, not a quantitative analysis.
leak_check👁 readHelium leak check: monitor m/z 4 while someone sprays helium on suspect joints, and report the baseline, every response above threshold_factor x baseline (start/end time, peak) and the time series. Keep the first few seconds free of helium so the baseline is clean. The response time of a real leak is a few seconds. Bounded by max_leak_check_duration_s.
measure_masses👁 readMeasure partial pressures at a list of m/z values (peak-locked single-mass measurements, MR). Fast and precise for monitoring known gases; the precision and time per mass are set by the noise floor (set_scan_parameters). Pressures are N2-equivalent.
read_total_pressure👁 readMeasure the total pressure with the RGA acting as an ionisation gauge (TP?, Faraday cup). Needs the filament on and the CDEM off. The value is N2-equivalent and can differ from a Bayard-Alpert gauge by a factor of a few, depending on the gas composition.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
set_cdem⚠️ hazardSwitch the electron multiplier (CDEM) on at a given high voltage for ~100-10000x more signal. High pressure shortens CDEM life and can destroy it, so this is refused unless the pressure is below max_cdem_pressure_torr (RGA total pressure measured now with the Faraday cup, a recent one, or external_pressure_torr), and the voltage is capped by max_cdem_voltage_v. Total-pressure readings are disabled while the CDEM is on.
set_filament⚠️ hazardSwitch the filament on (or change its emission current). The filament burns out or is damaged above 1e-4 Torr, so this is refused unless the pressure is below max_filament_pressure_torr: pass external_pressure_torr from a separate gauge, or, if the filament is already on, the RGA's own total pressure is measured. The RGA's protection will also shut the filament down on overpressure (reported as FL6).
set_scan_parameters🎛 controlChange measurement settings: noise floor (speed vs detection limit), electron energy, ion energy, focus plate voltage and analog-scan resolution. Sensitivity factors stored in the head are only valid at the default ionizer settings (70 eV, 12 eV, 90 V). After changing the noise floor the detector zero is re-adjusted automatically at the start of the next scan.

get_connection_info, get_command_log and reconnect are built into every LabMCP server.

Safety limits

The RGA filament must only run below 1e-4 Torr, and a CDEM should never see voltage above 1e-4 Torr, with 5e-6 Torr or less recommended (manual: FL command warning p. 6-35, "CDEM Handling and Care" in the Maintenance chapter). The RGA only measures pressure while its filament emits, so switching on needs evidence:

  • set_filament and degas: the pressure must be at or below max_filament_pressure_torr. set_cdem: at or below max_cdem_pressure_torr, and the voltage at or below max_cdem_voltage_v (the hardware range of 10-2490 V is enforced as well).
  • Evidence for all three: external_pressure_torr (a reading from another gauge that the user confirmed) and, when the filament is on and the CDEM off, a total-pressure measurement taken right then. If both are available, the higher one is checked, so a mistyped gauge value can't override what the RGA measures. With the CDEM on (the RGA can't measure), a reading from the last max_pressure_reading_age_s is accepted, but only while the filament is still on: once it is off (switched off or tripped) an older reading says nothing about the present pressure.
  • RGA readings used as evidence are scaled to 1 mA emission: the ion current is proportional to the emission current, so a reading at 0.1 mA would otherwise understate the pressure 10x.
  • The instrument's own filament protection still applies: an overpressure shuts the emission and the CDEM down (error FL6), and get_status reports it.
  • all_off, filament_off and cdem_off interrupt a running scan, mass measurement or leak check (which then returns an error and no data) instead of waiting for it to finish. all_off attempts every step even if one fails, and reports what failed.
LimitDefaultMeaning
max_filament_pressure_torr1e-4 TorrHighest pressure at which the filament may be switched on or the ionizer degassed
max_cdem_pressure_torr5e-6 TorrHighest pressure at which the CDEM may be switched on
max_cdem_voltage_v2000 VHighest CDEM high voltage (hardware maximum 2490 V)
max_pressure_reading_age_s60 sOldest RGA total-pressure reading accepted as evidence (only while the filament stays on)
max_degas_minutes3 minLongest ionizer degas (hardware maximum 20 min)
max_scan_duration_s900 sLongest estimated analog/histogram scan
max_leak_check_duration_s1800 sLongest helium leak-check run

Override at launch, e.g. --limit max_cdem_voltage_v=2400 --limit max_filament_pressure_torr=1e-5.

Example prompts

  • "The ion gauge reads 2e-7 Torr. Switch the RGA filament on and tell me what's in the chamber."
  • "Take a

ตัดมาแค่ช่วงต้น อ่านต่อใน repo