ต้นแบบ · รุ่นทดลอง: มีทุก server ในทะเบียนทางการ อัปเดตทุก 30 นาที เข้าสู่ระบบด้วย Google เพื่อเขียนรีวิวได้แล้วต้นแบบ · อัปเดตทุก 30 นาที
PopNx MCPที่รวม MCP สำหรับคนใช้ AI · วิธีติดตั้งภาษาไทยทุกตัว

Smolmux MCP

โดย magnusmalmรุ่น 0.5.2i★ 2 (ดาวรวมทั้งรีโป)i–หน้า repo ↗
ชื่อใน registryio.github.magnusmalm/smolmux-mcp

วิธีติดตั้ง

ใช้ทำอะไรได้

ยังไม่มีคำอธิบายภาษาไทย ดูข้อเท็จจริงด้านล่าง หรือเปิดคำอธิบายต้นฉบับจากผู้ทำ

  • ต่อแบบ ติดตั้งในเครื่อง
  • บัญชีหรือคีย์ ไม่ต้องใส่คีย์
  • หมวด อื่น ๆ
คำอธิบายต้นฉบับจากผู้ทำ (อังกฤษ)
Serial console MCP server over a smolmux broker: shared UART, send/expect, history, boot stages.

ทำไมอยู่อันดับนี้

หน้ารายการเรียงด้วยคะแนนการใช้งาน (เต็ม 100) จากส่วนเหล่านี้

ความนิยม0/80ดาว GitHub หรือยอดดาวน์โหลดต่อสัปดาห์ ค่ามากนับ 60 ค่าน้อยนับ 20
ความสด12/12ออกรุ่นหรือแก้โค้ดใน 30 วัน ได้เต็ม
ระบบยังตอบ0/8endpoint บนคลาวด์ตอบตอนตรวจล่าสุด
คะแนนการใช้งาน12/100

คุณภาพ: ผลตรวจเบื้องต้นผ่าน 3/3 ข้อ (แสดงให้ดู ไม่ได้ใช้เรียง) · ความมาแรง: ยังไม่มีข้อมูล (ใช้เรียงเฉพาะแท็บมาแรง)

ติดตั้ง

เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง

ผลตรวจผ่าน 3/3 · ทำงานบนเครื่องคุณ

ขั้นแรก: คุณใช้ AI ตัวไหน

เลือกแอปที่คุณใช้ ขั้นตอนจะขึ้นด้านล่าง

Claude ยังต่อ Smolmux MCP ไม่ได้

ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP

ChatGPT ยังต่อ Smolmux MCP ไม่ได้

ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP

คุณทำแบบนี้แทนได้

ข · ตัวอื่นในหมวด อื่น ๆ ที่ต่อกับ ChatGPT ได้

เลือกจากตัวที่ใช้มากในหมวดเดียวกัน เฉพาะตัวที่ต่อด้วยที่อยู่ได้โดยไม่ต้องใส่คีย์

Claude Code ยังต่อ Smolmux MCP ไม่ได้

ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP

Cursor ยังต่อ Smolmux MCP ไม่ได้

ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP

VS Code ยังต่อ Smolmux MCP ไม่ได้

ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP

โปรแกรมอื่นที่ใช้ MCP ได้ เช่น Windsurf, Zed หรือ Gemini CLI มีวิธีเพิ่มต่างกัน ดูวิธีของแต่ละตัวในหน้ารวมโปรแกรม

ดูโปรแกรมที่ใช้ MCP ทั้งหมด →

ค่าตั้งแบบไฟล์ JSON อยู่ในหัวข้อ “สำหรับคนเขียนโค้ด” ด้านล่าง

ติดตรงไหน? ถามคนที่ใช้ Smolmux MCP อยู่💬 พูดคุย →

สรุป

ดาว GitHubi
2 (ดาวรวมทั้งรีโป)
รีโปนี้มี MCP หลายรายการ ดาวนับในอันดับแค่รายการเดียว
ดาวน์โหลดต่อสัปดาห์i
ไม่มียอดใน npm/PyPI
การเชื่อมต่อ
–
รุ่นล่าสุดi
0.5.2
หมวดi
อื่น ๆ
ส่งเข้า registryi
5 ต.ค. 2569
แก้โค้ดล่าสุดi
22 ต.ค. 2569
ผู้ทำ
magnusmalm
เว็บผู้ทำ
github.com
สถานะใน registry
ใช้งานอยู่

คู่มือที่เกี่ยวข้อง

ทำอะไรได้บ้าง

รันในเครื่องคุณ รายการเครื่องมือจะขึ้นในแอป AI หลังติดตั้ง

ผลตรวจเบื้องต้นi

เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 19 พ.ย. 2569

  • ✓ ผ่าน

    ตัวตนผู้ทำตรงกับ repo

    ชื่อใน registry ยืนยันด้วยบัญชี GitHub magnusmalm ซึ่งเป็นเจ้าของ repo

  • ✓ ผ่าน

    ยังมีคนดูแล

    มีการแก้โค้ดล่าสุด 28 วันที่ผ่านมา

  • ✓ ผ่าน

    มีสัญญาอนุญาต (license)

    ใช้ MIT

  • – ไม่เกี่ยว

    endpoint ตอบ

    ตัวนี้รันบนเครื่องคุณ ไม่มี endpoint บนอินเทอร์เน็ต

  • – ไม่เกี่ยว

    ล็อกอินแบบ OAuth

    ตัวนี้รันบนเครื่อง ใช้ค่าที่ตั้งในเครื่องแทน

  • … ยังไม่ตรวจ

    คำอธิบายเครื่องมือไม่มีคำสั่งแอบแฝง

    รันในเครื่องคุณ เราอ่านรายการเครื่องมือได้เฉพาะตัวที่มี endpoint บนอินเทอร์เน็ต

เราตรวจอะไรบ้าง → · JSON

ผู้ทำ: ขอให้ตรวจใหม่ หรือแจ้งข้อมูลผิด
สำหรับผู้ทำ: ติดป้ายใน README

ถ้าคุณเป็นผู้ทำตัวนี้ คัดลอกโค้ดนี้ไปวางใน README ได้เลย ป้ายลิงก์กลับมาที่หน้านี้

[![แนะนำบน PopNx MCP](https://mcp.popnx.com/badge/magnusmalm-smolmux-mcp.svg?lang=th)](https://mcp.popnx.com/th/servers/magnusmalm-smolmux-mcp)

พูดคุย

ถาม แชร์เคล็ดลับ หรือแจ้งว่าใช้ไม่ได้ เรียงตามที่คนกดว่ามีประโยชน์

ยังไม่มีใครโพสต์ ถามหรือแชร์เป็นคนแรกได้เลย

ข้อความในส่วนนี้เขียนโดยผู้ใช้ ไม่ใช่ทีม PopNx

เข้าสู่ระบบเพื่อโพสต์

รีวิวจากผู้ใช้

ยังไม่มีรีวิว

เข้าสู่ระบบเพื่อเขียนรีวิว

เทียบกับตัวอื่นในหมวด อื่น ๆi

  • ดาวมากกว่า 0% ของอีก 20653 ตัวในหมวดนี้
  • ส่งรุ่นใหม่เข้า registry ล่าสุดกว่า 50% ของอีก 20653 ตัวในหมวดนี้
  • ผลตรวจเบื้องต้นดีกว่าหรือเท่ากับ 99% ของอีก 20653 ตัวในหมวดนี้

เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo

คำถามที่พบบ่อย

Smolmux MCP ปลอดภัยไหม?

จากการตรวจเบื้องต้นของเรา ผ่าน 3 จาก 3 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น

ต้องใช้กุญแจหรือรหัสอะไรบ้าง?

registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก

ตัวนี้รันบนเครื่องหรือบนคลาวด์?

รันบนเครื่องของคุณ โปรแกรม AI จะเปิด server ขึ้นมาเองเมื่อใช้ ข้อมูลไม่ต้องผ่านเซิร์ฟเวอร์ของผู้ทำ (ยกเว้นตัวที่ไปเรียกบริการออนไลน์ต่อ)

ยังมีคนดูแลอยู่ไหม?

repo บน GitHub มีการแก้โค้ดล่าสุด 28 วันที่ผ่านมา และส่งรุ่นล่าสุด (0.5.2) เข้า registry เดือนที่แล้ว

ใช้กับโปรแกรมไหนได้บ้าง?

โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code

มีตัวไหนใช้แทนได้บ้าง?

ในหมวดเดียวกันมี World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

ตัวอื่นที่ทำงานคล้ายกัน

หมวดเดียวกันจากผู้ทำคนอื่น ผ่านตัวตรวจคำสั่งแล้ว ตัวทางการขึ้นก่อน แล้วเรียงตามดาว

อ่านการ์ด:↓ ดาวน์โหลดต่อสัปดาห์i★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi

World Monitor

ข่าวกรองโลกแบบเรียลไทม์: ความขัดแย้ง ตลาด พลังงาน การค้า การขนส่ง และไซเบอร์

โดย koala73ใช้กันมาก★ 90.9Kอัปเดต 3 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

โดย openstatusHQใช้กันมาก★ 9.3Kอัปเดต 2 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · openstatus.dev

Oh My Posh Validator

Validate oh-my-posh configurations and segment snippets against the official schema.

โดย JanDeDobbeleerใช้กันมาก★ 23.8K ดาวรวมทั้งรีโปอัปเดต 30 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · ohmyposh.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

โดย Klavis-AIกำลังโต★ 5.8Kอัปเดต 14 เดือนที่ผ่านมา

รันบนคลาวด์repo ถูกเก็บถาวร✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

โดย jitsucomใช้กันมาก★ 5.1Kอัปเดต 4 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · jitsu.com
เทียบกับตัวที่คล้ายกัน
ตัวนี้
Smolmux MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
ทำงานที่ไหนต้องลงในเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่อง
ต้องใส่คีย์ไม่ไม่ไม่ไม่ไม่ไม่
กด + ใน Claude ได้ไม่ไม่ไม่ไม่ไม่ไม่
ผลตรวจเบื้องต้น3/34/44/44/41/44/4
สัญญาอนุญาตMITAGPL-3.0AGPL-3.0MITApache-2.0MIT
ราคาไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียน

README จากผู้ทำ

เปิดอ่าน README

ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ

smolmux

A portable C11 device multiplexer. Holds a device connection open (serial UART, GDB stub) and multiplexes access to multiple clients over Unix sockets using newline-delimited JSON.

Single static binary, low latency, small footprint - built for daily serial and GDB bring-up on Linux.

New here? docs/START-HERE.md is a one-screen router - find your intent (run it, bring up a new board with an AI agent, understand the architecture, hack on the code) and it points you to the right doc.

One port, three clients

One broker holds an ESP32-S3's UART. The monitor (top) watches it live. In the bottom pane a script sends temp and gets the reply on the same wire, resets the board and waits for its prompt, then esptool reads the flash ID through with-port: the broker suspends, esptool runs, the broker resumes, and the monitor never loses the port.

Example: probe an unknown board

One broker holds SWD; smolmux-gdb-mcp runs `probe_unknown_board`. On a SAM C21 Xplained Pro that path decoded Cortex-M0+ from CPUID, named the part via SAM DSU DID, rejected a false STM32 match, and wrote a starter *.gdb-profile.json. Tools, register values, and profile shape: docs/demo-samc21-probe-transcript.md.

Day-to-day serial (multi-client, U-Boot break-in, flasher handoff): docs/daily-driver.md.

Features

  • Serial UART, GDB MI, and serial-over-TCP (telnet + RFC2217) device links via vtable polymorphism
  • Multiple concurrent clients over Unix sockets with role-based access (observer/controller/takeover)
  • Expect engine - concurrent regex matching on the device byte stream with timeouts
  • Anomaly detection - pattern-based crash/error detection with cooldown and incident tracking
  • Output history - timestamped ring buffer for replay by late-joining clients
  • Structured logging - JSONL I/O log + human-readable text log with rotation (the I/O log records everything sent to and from the device, including anything typed at a login prompt — it is created 0600 under your private state directory, and smolmux refuses to write it through a symlink or to a file owned by another user)
  • Network sinks - TCP and WebSocket for remote access (loopback by default). The wire protocol is cleartext, and any client that completes the handshake gets full control of the device — console writes, pins, BREAK, SysRq, GDB. On loopback without --auth-token, the broker generates a token into a 0600 file in $XDG_RUNTIME_DIR (or /tmp), so other local users and processes cannot connect; your own smolmux-monitor / smolmux-mcp read it automatically, and smolmux-cli token prints it. For remote use, keep the bind on loopback and reach it over an SSH tunnel or WireGuard rather than exposing the port; smolmux refuses to serve a non-loopback TCP bind with no --auth-token. --insecure-no-auth turns both protections off.
  • MCP servers - standalone smolmux-mcp / smolmux-gdb-mcp attach to a running broker; optional in-process --mcp sink for single-process stdio
  • Boot tracking & autoresponder - ordered boot stages, stall events, standing expect->send rules
  • Autoboot interrupt - broker-side key flood (and optional DTR/RTS reset) for bootdelay=0 U-Boot
  • Device profiles / board manifests - JSON configs for prompts, anomalies, multi-wire boards
  • Auto-reconnect - exponential backoff recovery on USB-serial disconnect
  • Build-time feature selection - Kconfig-based; UART-only builds carry no GDB/TCP/WebSocket code

Quick start

Prerequisites: Linux, a C11 compiler, CMake 3.21+, Python 3 with kconfiglib (the configure step generates the feature header with it). libpcre2-8 is optional; without it regex matching falls back to POSIX.

# Debian/Ubuntu

sudo apt install build-essential cmake python3 python3-pip libpcre2-dev pip install kconfiglib # or in a venv; Debian's system Python may need

--break-system-packages

cmake -B build && cmake --build build -j$(nproc)

./build/smolmux /dev/ttyUSB0

Connect a client:

# Needs a running broker (above). Auto-discovers the socket from the port name.

./build/smolmux-monitor /dev/ttyUSB0

Day-to-day workflows (profiles, logs, U-Boot break-in, multi-wire boards): docs/daily-driver.md. Intent router: docs/START-HERE.md.

Build

cmake -B build && cmake --build build -j$(nproc)   # Default (all features)

ctest --test-dir build # Run tests

Feature profiles
cp configs/defconfig.minimal .config && cmake -B build    # UART only, no sinks/watcher

cp configs/defconfig.uart .config && cmake -B build # UART + MCP sink + watcher cp configs/defconfig.embedded .config && cmake -B build # Embedded target profile cp configs/defconfig.full .config && cmake -B build # Everything (GDB, TCP, WS, MCP, watcher)

Or toggle features directly:

cmake -B build -DSM_ENABLE_GDB=OFF -DSM_ENABLE_SINK_WS=OFF

Developer benchmarks (e.g. the output coalescer harness) are off by default:

cmake -B build -DSM_BUILD_BENCH=ON && cmake --build build --target bench_coalesce

Interactive configuration:

cmake --build build --target menuconfig
Static builds
cmake -B build -DSM_MUSL_STATIC=ON    # Fully static musl binary (zero runtime deps)

cmake -B build -DSM_STATIC=ON # Static linking (except glibc)

Usage

smolmux <port> [options]

Options: -b, --baud Baud rate (default: 115200) -s, --socket Unix socket path -l, --log-dir I/O log directory (default: $XDG_STATE_HOME/smolmux or ~/.local/state/smolmux) -t, --text-log-dir Text log directory -p, --profile Device profile JSON file --board Group this wire under a board (for discovery) --role This wire's role on the board (console, swd, ...) --gdb Use GDB MI link instead of UART --gdb-path Path to gdb binary (default: gdb) --gdb-target GDB target (e.g., localhost:3333) --serial-tcp Connect to a serial-over-TCP device server (ser2net, socat, terminal server; telnet + RFC2217 baud/DTR/RTS/break control) --mcp Enable in-process MCP stdio sink (prefer standalone smolmux-mcp against a daemon broker for daily use) --tcp-port Enable TCP sink (default: 5555) --tcp-bind TCP bind address (default: 127.0.0.1) --auth-token Require token in hello from TCP clients (prefer env SMOLMUX_AUTH_TOKEN - hidden from ps) --auth-token-file Read the token from a file --insecure-no-auth Serve TCP/WS with no token. Without it, a loopback listener gets a generated token (0600 file; smolmux-cli token prints it) and a non-loopback --tcp-bind is refused. --ws-port Enable WebSocket sink (default: 5556) --no-text-log Disable text log --no-io-log Disable JSONL I/O log --no-reconnect Don't auto-reconnect on disconnect --wait-device Wait for the device path before open --gdb-allow-shell Permit GDB shell/python/eval (off by default) --list-ports List available serial ports and exit --list-profiles List available device profiles and exit --help-protocol Show wire protocol documentation -v, --verbose Enable debug logging -V, --version Show version -h, --help Show this help

Wire protocol

Newline-delimited JSON over Unix sockets (also TCP/WS sinks). Binary data is base64-encoded. Message set covers session control, expect, history, anomaly, boot stages, autoboot flood, and autoresponder.

Full reference: ./build/smolmux --help-protocol (always matches this binary).

Client -> Broker: hello, send, send_expect, takeover, release, status, pin_control, set_baud, suspend, resume, history_request, incidents_request, configure_anomaly, interrupt_autoboot, configure_autoresponder, autoresponders_request

Broker -> Client: welcome, output, input_echo, expect_result, status_response, error, history_response, incidents_response, anomaly, autoboot_result, boot_stage, boot_stall, autoresponders_response, autoresponder_fired, suspended, resumed, link_down, link_up

Example session:

-> {"type":"hello","name":"my-tool","role":"controller","protocol_version":1}

<- {"type":"welcome","broker_version":"x.y.z","protocol_version":1,"port":"/dev/ttyUSB0","baud":115200,"your_role":"controller"} -> {"type":"send","id":"1","data":"dW5hbWUgLWEK"} <- {"type":"output","data":"TGludXggNC4xOS4w...","timestamp":1709654321.123}

Architecture

┌───────────┐  ┌───────────┐

│ uart link │ │ gdb link │ <- device-facing, compiled in/out via Kconfig └─────┬─────┘ └─────┬─────┘ │ │ ▼ ▼ ┌──────────────────────────────┐ │ smolmux core │ <- epoll event loop, message bus, │ history · logging · anomaly │ role enforcement, expect engine └──┬───────┬───────┬───────┬───┘ │ │ │ │ ▼ ▼ ▼ ▼ ┌──────┐┌─────┐┌─────┐┌──────┐ │ unix ││ tcp ││ ws ││ mcp │ <- sinks, also compiled in/out │socket││sink ││sink ││ sink │ └──────┘└─────┘└─────┘└──────┘

See DESIGN.md for full architecture documentation.

Dependencies

Required: cJSON (vendored, single file)

Auto-detected: PCRE2 (libpcre2-8). Used as the regex engine when present, because it bounds backtracking internally; the build falls back to POSIX ERE automatically when it is absent, so it is never required. Force either way with -DSM_ENABLE_PCRE2=ON (error if missing) or -DSM_ENABLE_PCRE2=OFF.

Core has zero *required* external dependencies beyond POSIX + cJSON.

Companion tools

  • smolmux-cli - command-line client (send commands, read output; with-port suspends the port, runs an external tool like a flasher, then always resumes)
  • smolmux-monitor - interactive terminal client with escape sequences (prefix key then a command; prefix defaults to Ctrl-], change with -e, e.g. -e esc or -e ^A)
  • smolmux-mcp - standalone MCP server: connects to a running broker and exposes serial tools (serial_send_command, serial_read, serial_boot_status, serial_add_autoresponder, ...). Alternative: broker --mcp sink embeds MCP in-process.
  • smolmux-gdb-mcp - standalone MCP server for GDB debugging: 21 tools over a broker holding a --gdb link - breakpoints, stepping, backtrace, name-labeled registers, memory, expression eval, fault-register decode (where the core has them), peripheral reads, gdb_interrupt, and unknown-board probing on ARM Cortex-M today (gdb_identify_target / gdb_generate_profile; other architectures are planned). Resources and prompts include smolmux-gdb://board-probing and probe_unknown_board. Built when

ตัดมาแค่ช่วงต้น อ่านต่อใน repo