ต้นแบบ · รุ่นทดลอง: มีทุก server ในทะเบียนทางการ อัปเดตทุก 30 นาที เข้าสู่ระบบด้วย Google เพื่อเขียนรีวิวได้แล้วต้นแบบ · อัปเดตทุก 30 นาที
PopNx MCPที่รวม MCP สำหรับคนใช้ AI · วิธีติดตั้งภาษาไทยทุกตัว

Tinkercad Circuits MCP

โดย netchuuรุ่น 0.1.0i★ 2iรันบนเครื่องหน้า repo ↗
ชื่อใน registryio.github.netchuu/tinkercad-circuits-mcp

วิธีติดตั้ง

ใช้ทำอะไรได้

ยังไม่มีคำอธิบายภาษาไทย ดูข้อเท็จจริงด้านล่าง หรือเปิดคำอธิบายต้นฉบับจากผู้ทำ

  • ต่อแบบ ติดตั้งในเครื่อง
  • บัญชีหรือคีย์ ไม่ต้องใส่คีย์
  • หมวด อื่น ๆ
คำอธิบายต้นฉบับจากผู้ทำ (อังกฤษ)
Builds and simulates Arduino breadboard circuits in Tinkercad Circuits.

ทำไมอยู่อันดับนี้

หน้ารายการเรียงด้วยคะแนนการใช้งาน (เต็ม 100) จากส่วนเหล่านี้

ความนิยม16/80ดาว GitHub หรือยอดดาวน์โหลดต่อสัปดาห์ ค่ามากนับ 60 ค่าน้อยนับ 20
ความสด12/12ออกรุ่นหรือแก้โค้ดใน 30 วัน ได้เต็ม
ระบบยังตอบ0/8endpoint บนคลาวด์ตอบตอนตรวจล่าสุด
คะแนนการใช้งาน28/100

คุณภาพ: ผลตรวจเบื้องต้นผ่าน 3/3 ข้อ (แสดงให้ดู ไม่ได้ใช้เรียง) · ความมาแรง: 13 (ใช้เรียงเฉพาะแท็บมาแรง)

ติดตั้ง

เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง

ให้ AI ติดตั้งให้ด้วยประโยคเดียว

ติดตั้ง Tinkercad Circuits MCP ให้หน่อย ทำตาม https://mcp.popnx.com/i/netchuu-tinkercad-circuits-mcp.md แสดงคำสั่งให้ฉันดูและรอฉันตกลงก่อนรัน

คัดลอกไปวางในแชตของ AI ที่ทำงานในเครื่องคุณได้ (เช่น Claude Code, Cursor) · AI จะอ่านขั้นตอนจากเรา แสดงคำสั่งให้ดู และรอคุณตกลงก่อน · ไม่ต้องใช้คีย์ ไม่ต้องสมัคร · ดูข้อความเต็มที่ AI จะอ่าน

ผลตรวจผ่าน 3/3 · ทำงานบนเครื่องคุณ · ✓ ตรวจคำสั่งแล้ว 13 พ.ย. 2569

ขั้นแรก: คุณใช้ AI ตัวไหน

เลือกแอปที่คุณใช้ ขั้นตอนจะขึ้นด้านล่าง

ต่อกับ Claude ได้ แต่ต้องเตรียมก่อน

ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว) · ใช้ได้เฉพาะแอป Claude บนคอม (Windows หรือ Mac) ไม่ใช่บนเว็บหรือมือถือ

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Claude AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ Tinkercad Circuits MCP ให้ Claude ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี Node.js ด้วยคำสั่ง node -v ถ้าไม่มี ให้บอกฉันไปลงจาก https://nodejs.org/en/download ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "mcpServers": { "tinkercad-circuits": { "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ Tinkercad Circuits MCP ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง Node.js ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    node -v
    • ขึ้นเลขรุ่น เช่น v26.13.1 = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: เปิดหน้าดาวน์โหลดทางการ เลือกรุ่น LTS แล้วเลือกตัวติดตั้งแบบกดเอง: Mac ไฟล์ .pkg · Windows ไฟล์ .msi ดับเบิลคลิกแล้วกดถัดไปจนจบ ไม่ต้องใช้คำสั่ง curl

    เปิดหน้าดาวน์โหลด Node.js ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: node -v

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ Node.js

  2. เปิดไฟล์ตั้งค่าของแอป Claude บนคอม

    SettingsDeveloperEdit Config

  3. วางค่าตั้งนี้แล้วบันทึกไฟล์

    {
      "mcpServers": {
        "tinkercad-circuits": {
          "command": "npx",
          "args": [
            "-y",
            "tinkercad-circuits-mcp"
          ]
        }
      }
    }
  4. ปิดแอป Claude แล้วเปิดใหม่

  5. ลองเลย

    ใช้ Tinkercad Circuits MCP บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Claude บอกว่ากำลังใช้ Tinkercad Circuits MCP หรือมีชื่อเครื่องมือของ Tinkercad Circuits MCP ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Anthropic เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ChatGPT ยังต่อ Tinkercad Circuits MCP ไม่ได้

Tinkercad Circuits MCP ต้องติดตั้งในเครื่องคุณ แต่ ChatGPT ต่อได้เฉพาะตัวที่ทำงานบนเว็บ

คุณทำแบบนี้แทนได้

ก · ใช้แอปที่ต่อ Tinkercad Circuits MCP ได้

  • ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว) · ใช้ได้เฉพาะแอป Claude บนคอม (Windows หรือ Mac) ไม่ใช่บนเว็บหรือมือถือ
  • ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว)
  • ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว)
  • ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว)

ข · ตัวอื่นในหมวด อื่น ๆ ที่ต่อกับ ChatGPT ได้

เลือกจากตัวที่ใช้มากในหมวดเดียวกัน เฉพาะตัวที่ต่อด้วยที่อยู่ได้โดยไม่ต้องใส่คีย์

ต่อกับ Claude Code ได้ แต่ต้องเตรียมก่อน

ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Claude Code AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ Tinkercad Circuits MCP ให้ Claude Code ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี Node.js ด้วยคำสั่ง node -v ถ้าไม่มี ให้บอกฉันไปลงจาก https://nodejs.org/en/download ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcp 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ Tinkercad Circuits MCP ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง Node.js ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    node -v
    • ขึ้นเลขรุ่น เช่น v26.13.1 = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: เปิดหน้าดาวน์โหลดทางการ เลือกรุ่น LTS แล้วเลือกตัวติดตั้งแบบกดเอง: Mac ไฟล์ .pkg · Windows ไฟล์ .msi ดับเบิลคลิกแล้วกดถัดไปจนจบ ไม่ต้องใช้คำสั่ง curl

    เปิดหน้าดาวน์โหลด Node.js ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: node -v

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ Node.js

  2. เปิด Terminal

    Mac: กด Command+Space พิมพ์ Terminal · Windows: เปิด PowerShell

  3. วางคำสั่งนี้แล้วกด Enter

    claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcp
  4. พิมพ์ /mcp ใน Claude Code

    ต้องเห็น Tinkercad Circuits MCP ในรายการและขึ้นว่าเชื่อมต่อแล้ว

  5. ลองเลย

    ใช้ Tinkercad Circuits MCP บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Claude Code บอกว่ากำลังใช้ Tinkercad Circuits MCP หรือมีชื่อเครื่องมือของ Tinkercad Circuits MCP ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Anthropic เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ต่อกับ Cursor ได้ แต่ต้องเตรียมก่อน

ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ Cursor AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ Tinkercad Circuits MCP ให้ Cursor ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี Node.js ด้วยคำสั่ง node -v ถ้าไม่มี ให้บอกฉันไปลงจาก https://nodejs.org/en/download ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "mcpServers": { "tinkercad-circuits": { "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ Tinkercad Circuits MCP ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง Node.js ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    node -v
    • ขึ้นเลขรุ่น เช่น v26.13.1 = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: เปิดหน้าดาวน์โหลดทางการ เลือกรุ่น LTS แล้วเลือกตัวติดตั้งแบบกดเอง: Mac ไฟล์ .pkg · Windows ไฟล์ .msi ดับเบิลคลิกแล้วกดถัดไปจนจบ ไม่ต้องใช้คำสั่ง curl

    เปิดหน้าดาวน์โหลด Node.js ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: node -v

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ Node.js

  2. กดปุ่มนี้เพื่อเปิด Cursor

    เปิดใน Cursor

    Cursor จะถามยืนยันการติดตั้ง ให้กด Install

  3. เปิดแชตของ AI ใน Cursor โหมด Agent

  4. ลองเลย

    ใช้ Tinkercad Circuits MCP บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า Cursor บอกว่ากำลังใช้ Tinkercad Circuits MCP หรือมีชื่อเครื่องมือของ Tinkercad Circuits MCP ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ Cursor เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

ต่อกับ VS Code ได้ แต่ต้องเตรียมก่อน

ต้องลง Node.js ในเครื่องก่อน (ทำครั้งเดียว)

ให้ AI ติดตั้งให้

คัดลอกข้อความนี้ไปวางในแชตของ VS Code AI จะเช็กเครื่อง บอกว่าจะแก้ไฟล์ไหน และรอคุณตกลงก่อนทุกครั้ง

ช่วยติดตั้ง MCP server ชื่อ Tinkercad Circuits MCP ให้ VS Code ในเครื่องนี้ ทำตามลำดับ 1) เช็กว่ามี Node.js ด้วยคำสั่ง node -v ถ้าไม่มี ให้บอกฉันไปลงจาก https://nodejs.org/en/download ห้ามลงเอง 2) ใช้คอนฟิกนี้เท่านั้น (ผ่านตัวตรวจของ PopNx MCP แล้ว): { "servers": { "tinkercad-circuits": { "type": "stdio", "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) บอก path เต็มของไฟล์ที่จะแก้ หรือคำสั่งที่จะรัน แล้วรอฉันตกลงก่อน 4) ไม่ต้องใช้คีย์ 5) ทำตามที่ตกลง แล้วตรวจว่าเครื่องมือของ Tinkercad Circuits MCP ขึ้นจริง

ข้อความนี้ไม่มีคีย์ของคุณ ถ้าต้องใช้คีย์ AI จะบอกให้คุณวางเองในไฟล์หรือช่องของแอป

  1. ลง Node.js ในเครื่อง (ถ้ายังไม่มี)

    ลงไว้แล้วหรือยัง? เช็กก่อน · เปิด Terminal แล้วพิมพ์คำสั่งนี้ กด Enter

    node -v
    • ขึ้นเลขรุ่น เช่น v26.13.1 = ลงแล้ว ข้ามขั้นนี้ได้
    • ขึ้นว่า "command not found" (Windows ขึ้นว่า "is not recognized") = ยังไม่ได้ลง หรือเพิ่งลงแต่ยังไม่ได้ปิดแล้วเปิด Terminal ใหม่
    เปิด Terminal ยังไง

    Mac: กด ⌘ + Space พิมพ์ Terminal แล้วกด Enter

    Windows: เปิดเมนู Start พิมพ์ Windows PowerShell แล้วกด Open

    ยังไม่ได้ลง: เปิดหน้าดาวน์โหลดทางการ เลือกรุ่น LTS แล้วเลือกตัวติดตั้งแบบกดเอง: Mac ไฟล์ .pkg · Windows ไฟล์ .msi ดับเบิลคลิกแล้วกดถัดไปจนจบ ไม่ต้องใช้คำสั่ง curl

    เปิดหน้าดาวน์โหลด Node.js ↗

    ลงเสร็จแล้ว ปิด Terminal เปิดใหม่ แล้วพิมพ์คำสั่งเดิมอีกครั้ง ต้องขึ้นเลขรุ่น: node -v

    ลงครั้งเดียว ใช้ได้กับทุกตัวที่ต้องใช้ Node.js

  2. กดปุ่มนี้เพื่อเปิด VS Code

    เปิดใน VS Code

    VS Code จะถามยืนยันการติดตั้ง ให้กด Install

  3. เปิดแชตของ AI ใน VS Code โหมด Agent

  4. ลองเลย

    ใช้ Tinkercad Circuits MCP บอกหน่อยว่าทำอะไรให้ฉันได้บ้าง แล้วลองทำให้ดูหนึ่งอย่าง

    ✓ ถ้า VS Code บอกว่ากำลังใช้ Tinkercad Circuits MCP หรือมีชื่อเครื่องมือของ Tinkercad Circuits MCP ขึ้นในคำตอบ แปลว่าต่อสำเร็จ

ชื่อเมนูตรวจกับหน้าช่วยเหลือของ VS Code เมื่อ 11 พ.ย. 2569 · หน้าจอของคุณอาจต่างเล็กน้อยตามรุ่นของแอป

โปรแกรมอื่นที่ใช้ MCP ได้ เช่น Windsurf, Zed หรือ Gemini CLI มีวิธีเพิ่มต่างกัน ดูวิธีของแต่ละตัวในหน้ารวมโปรแกรม

ดูโปรแกรมที่ใช้ MCP ทั้งหมด →

ค่าตั้งแบบไฟล์ JSON อยู่ในหัวข้อ “สำหรับคนเขียนโค้ด” ด้านล่าง

ติดตรงไหน? ถามคนที่ใช้ Tinkercad Circuits MCP อยู่💬 พูดคุย →
สำหรับคนเขียนโค้ด: คำสั่ง Terminal และค่าตั้ง JSON

ติดตั้งในเครื่อง

Claude Code

claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "tinkercad-circuits": {
      "command": "npx",
      "args": [
        "-y",
        "tinkercad-circuits-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "tinkercad-circuits": {
      "command": "npx",
      "args": [
        "-y",
        "tinkercad-circuits-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "tinkercad-circuits": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "tinkercad-circuits-mcp"
      ]
    }
  }
}

ค่าตั้งนี้สร้างจากข้อมูลใน registry ของผู้ทำ ถ้าไม่ตรงกับ README ให้เชื่อ README

สรุป

ดาวน์โหลดต่อสัปดาห์i
434/สัปดาห์
การเชื่อมต่อ
รันบนเครื่อง
รุ่นล่าสุดi
0.1.0
หมวดi
อื่น ๆ
ส่งเข้า registryi
6 พ.ย. 2569
แก้โค้ดล่าสุดi
6 พ.ย. 2569
ผู้ทำ
netchuu
แพ็กเกจ
npm: tinkercad-circuits-mcp
สถานะใน registry
ใช้งานอยู่

ใช้กับโปรแกรมไหนได้

ดูจากแบบการต่อของ server ตัวนี้ และเอกสารของผู้ทำโปรแกรมแต่ละตัว ตรวจเมื่อ 10 พ.ย. 2569

ติดตั้งบนเครื่องได้ใน

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

ดูโปรแกรมทั้งหมดพร้อมข้อดีข้อเสีย →

คู่มือที่เกี่ยวข้อง

ทำอะไรได้บ้าง

รันในเครื่องคุณ รายการเครื่องมือจะขึ้นในแอป AI หลังติดตั้ง

ผลตรวจเบื้องต้นi

เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 20 พ.ย. 2569

  • ✓ ผ่าน

    ตัวตนผู้ทำตรงกับ repo

    ชื่อใน registry ยืนยันด้วยบัญชี GitHub netchuu ซึ่งเป็นเจ้าของ repo

  • ✓ ผ่าน

    ยังมีคนดูแล

    มีการแก้โค้ดล่าสุด 14 วันที่ผ่านมา

  • ✓ ผ่าน

    มีสัญญาอนุญาต (license)

    ใช้ MIT

  • – ไม่เกี่ยว

    endpoint ตอบ

    ตัวนี้รันบนเครื่องคุณ ไม่มี endpoint บนอินเทอร์เน็ต

  • – ไม่เกี่ยว

    ล็อกอินแบบ OAuth

    ตัวนี้รันบนเครื่อง ใช้ค่าที่ตั้งในเครื่องแทน

  • … ยังไม่ตรวจ

    คำอธิบายเครื่องมือไม่มีคำสั่งแอบแฝง

    รันในเครื่องคุณ เราอ่านรายการเครื่องมือได้เฉพาะตัวที่มี endpoint บนอินเทอร์เน็ต

ช่องโหว่ที่เปิดเผยแล้ว (OSV.dev)

ไม่พบรายการใน OSV.dev สำหรับ tinkercad-circuits-mcp@0.1.0

ตรวจเฉพาะตัวแพ็กเกจรุ่นนี้ ไม่ใช่ทุก dependency · ตรวจเมื่อ 15 พ.ย. 2569

เราตรวจอะไรบ้าง → · JSON

ผู้ทำ: ขอให้ตรวจใหม่ หรือแจ้งข้อมูลผิด
สำหรับผู้ทำ: ติดป้ายใน README

ถ้าคุณเป็นผู้ทำตัวนี้ คัดลอกโค้ดนี้ไปวางใน README ได้เลย ป้ายลิงก์กลับมาที่หน้านี้

[![แนะนำบน PopNx MCP](https://mcp.popnx.com/badge/netchuu-tinkercad-circuits-mcp.svg?lang=th)](https://mcp.popnx.com/th/servers/netchuu-tinkercad-circuits-mcp)

พูดคุย

ถาม แชร์เคล็ดลับ หรือแจ้งว่าใช้ไม่ได้ เรียงตามที่คนกดว่ามีประโยชน์

ยังไม่มีใครโพสต์ ถามหรือแชร์เป็นคนแรกได้เลย

ข้อความในส่วนนี้เขียนโดยผู้ใช้ ไม่ใช่ทีม PopNx

เข้าสู่ระบบเพื่อโพสต์

รีวิวจากผู้ใช้

ยังไม่มีรีวิว

เข้าสู่ระบบเพื่อเขียนรีวิว

เทียบกับตัวอื่นในหมวด อื่น ๆi

  • ดาวมากกว่า 91% ของอีก 20815 ตัวในหมวดนี้
  • ส่งรุ่นใหม่เข้า registry ล่าสุดกว่า 78% ของอีก 20815 ตัวในหมวดนี้
  • ผลตรวจเบื้องต้นดีกว่าหรือเท่ากับ 99% ของอีก 20815 ตัวในหมวดนี้

เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo

คำถามที่พบบ่อย

Tinkercad Circuits MCP ปลอดภัยไหม?

จากการตรวจเบื้องต้นของเรา ผ่าน 3 จาก 3 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น

ต้องใช้กุญแจหรือรหัสอะไรบ้าง?

registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก

ตัวนี้รันบนเครื่องหรือบนคลาวด์?

รันบนเครื่องของคุณ โปรแกรม AI จะเปิด server ขึ้นมาเองเมื่อใช้ ข้อมูลไม่ต้องผ่านเซิร์ฟเวอร์ของผู้ทำ (ยกเว้นตัวที่ไปเรียกบริการออนไลน์ต่อ)

ยังมีคนดูแลอยู่ไหม?

repo บน GitHub มีการแก้โค้ดล่าสุด 14 วันที่ผ่านมา และส่งรุ่นล่าสุด (0.1.0) เข้า registry 14 วันที่ผ่านมา

ใช้กับโปรแกรมไหนได้บ้าง?

โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code ตัวนี้ต้องมี Node.js ในเครื่องด้วย

มีตัวไหนใช้แทนได้บ้าง?

ในหมวดเดียวกันมี World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

ตัวอื่นที่ทำงานคล้ายกัน

หมวดเดียวกันจากผู้ทำคนอื่น ผ่านตัวตรวจคำสั่งแล้ว ตัวทางการขึ้นก่อน แล้วเรียงตามดาว

อ่านการ์ด:↓ ดาวน์โหลดต่อสัปดาห์i★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi

World Monitor

ข่าวกรองโลกแบบเรียลไทม์: ความขัดแย้ง ตลาด พลังงาน การค้า การขนส่ง และไซเบอร์

โดย koala73ใช้กันมาก★ 90.9Kอัปเดต 4 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

โดย openstatusHQใช้กันมาก★ 9.3Kอัปเดต 2 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · openstatus.dev

Oh My Posh Validator

Validate oh-my-posh configurations and segment snippets against the official schema.

โดย JanDeDobbeleerใช้กันมาก★ 23.8K ดาวรวมทั้งรีโปอัปเดต 31 วันที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · ohmyposh.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

โดย Klavis-AIกำลังโต★ 5.8Kอัปเดต 14 เดือนที่ผ่านมา

รันบนคลาวด์repo ถูกเก็บถาวร✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

โดย jitsucomใช้กันมาก★ 5.1Kอัปเดต 4 เดือนที่ผ่านมา

รันบนคลาวด์✓ เจ้าของบริการ · jitsu.com
เทียบกับตัวที่คล้ายกัน
ตัวนี้
Tinkercad Circuits MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
ทำงานที่ไหนต้องลงในเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่องใช้บนคลาวด์ ไม่ต้องลงเครื่อง
ต้องใส่คีย์ไม่ไม่ไม่ไม่ไม่ไม่
กด + ใน Claude ได้ไม่ไม่ไม่ไม่ไม่ไม่
ผลตรวจเบื้องต้น3/34/44/44/41/44/4
สัญญาอนุญาตMITAGPL-3.0AGPL-3.0MITApache-2.0MIT
ราคาไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียนไม่พบค่าใช้จ่ายในทะเบียน

README จากผู้ทำ

เปิดอ่าน README

ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ

tinkercad-circuits-mcp

An MCP server that builds Arduino circuits in Tinkercad Circuits and runs them in the simulator. You describe the circuit (which part goes in which breadboard hole, the wires, the sketch) and it appears in your Tinkercad account, wired on a breadboard, with the code saved. It can then start the simulation, press buttons, type into the Serial Monitor and tell you what the LEDs, servos and serial output did.

It works with Claude Code, Claude Desktop, Cursor, Codex and any other client that speaks the Model Context Protocol.

*examples/traffic-light.json, built and simulated by the server. The LEDs are read back from the simulator to check the order.*

I wrote it to get through a course with 70-odd Arduino lab tasks that all had to be handed in as Tinkercad designs. Building them by hand took forever.

If you found sethski/tinkercad-mcp-server first: that one works by clicking and dragging in the editor. When I tried it in November 2026 it could not create a circuit or find the breadboard in the parts panel, and it had no way of knowing which hole a leg ended up in. This server changes the editor's circuit model directly, so parts land in the holes you name, and it reads the result back and checks it in the simulator.

Not affiliated with Autodesk. Tinkercad has no public API for Circuits; this uses the editor's internals, which can change without notice. See How it works.

What it can do

  • Create or open a design and build a whole circuit in one call: Arduino Uno, small breadboard, parts in the holes you name, colour-coded jumper wires routed around the board.
  • Write the Arduino sketch into the design.
  • Read a design back: every part, the hole under each pin, its settings, every wire, the code.
  • Run the simulator and sample LED brightness, servo angles and the Serial Monitor at the times you choose, while pressing buttons or sending serial input.
  • Change a setting between runs, like a potentiometer position or the distance an ultrasonic sensor sees, to test different inputs.

About 20 parts are supported: LEDs, resistors, buttons, potentiometers, servos, a piezo, the HC-SR04, TMP36, DC motors (with and without encoder), the L293D, an IR receiver, an RGB LED and a few more. The full list is in docs/parts.md.

Setup

You need Node.js 20 or newer and Google Chrome.

Claude Code

Install it as a plugin. That adds the MCP server and the skill in one go:

/plugin install tinkercad-circuits --marketplace netchuu/tinkercad-circuits-mcp

From a shell: claude plugin marketplace add netchuu/tinkercad-circuits-mcp and then claude plugin install tinkercad-circuits@tinkercad-circuits-mcp.

If you only want the server: claude mcp add tinkercad-circuits -- npx -y tinkercad-circuits-mcp.

Codex

In ~/.codex/config.toml:

[mcp_servers.tinkercad-circuits]

command = "npx" args = ["-y", "tinkercad-circuits-mcp"]

and the skill:

mkdir -p ~/.codex/skills/tinkercad-circuits

curl -fsSL https://raw.githubusercontent.com/netchuu/tinkercad-circuits-mcp/main/skills/tinkercad-circuits/SKILL.md -o ~/.codex/skills/tinkercad-circuits/SKILL.md

Claude Desktop, Cursor and other clients

Add this to the client's MCP config: claude_desktop_config.json for Claude Desktop, ~/.cursor/mcp.json for Cursor.

{

"mcpServers": { "tinkercad-circuits": { "command": "npx", "args": ["-y", "tinkercad-circuits-mcp"] } } }

Sign in to Tinkercad

Once, whichever client you use:

npx -y tinkercad-circuits-mcp login

This opens Chrome on the Tinkercad page. Sign in the way you normally do; it is an ordinary Chrome window. It closes once you reach your dashboard. The session lives in ~/.tinkercad-circuits-mcp/profile; your password never passes through this project.

Restart your client afterwards so it picks up the server.

Let your agent set it up

You can hand the setup to Claude Code or Codex:

Set up the Tinkercad Circuits MCP server from https://github.com/netchuu/tinkercad-circuits-mcp, following its README.

The agent can do everything except signing in. It should run npx -y tinkercad-circuits-mcp login and ask you to sign in in the Chrome window that opens; then, after a restart, tinkercad_status should report signedIn: true.

From source
git clone https://github.com/netchuu/tinkercad-circuits-mcp.git

cd tinkercad-circuits-mcp npm install npm run build npm run login

and use node /full/path/to/tinkercad-circuits-mcp/dist/index.js as the command in the configs above.

Using it

Ask for a circuit in plain words:

Build a traffic light in Tinkercad: red, yellow and green LEDs on pins 10, 9 and 8, green for 5 s, yellow 2 s, red 5 s. Then run it and check the order.

Claude turns that into a spec for tinkercad_build_circuit. A smaller one, a single blinking LED, looks like this:

{

"title": "Blink an LED on a breadboard", "parts": [ { "ref": "r1", "type": "resistor", "at": "5g", "pin": "1", "angle": 90, "props": { "ohms": 220 } }, { "ref": "led1", "type": "led", "at": "9i", "pin": "anode", "angle": 180 } ], "wires": [["uno.GND1", "T-1"], ["uno.D13", "5i"], ["10h", "T-10"]], "code": "void setup() { pinMode(13, OUTPUT); }\nvoid loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); }" }

The resistor spans columns 5 to 9 in row g, the LED's anode shares column 9 and its cathode goes to the ground rail. The format is explained in docs/circuit-spec.md, and there are more complete circuits in examples/.

To check the circuit, Claude calls tinkercad_simulate:

{ "samples_ms": [500, 1500, 2500], "leds": ["led1"] }

and gets back, for each sample, whether led1 was on and the simulator clock at that moment.

Tools

ToolWhat it does
tinkercad_statusChecks that the Chrome profile is signed in to Tinkercad.
tinkercad_list_partsParts, pin names and settings.
tinkercad_open_circuitOpens a design by link or id, or creates a new one.
tinkercad_build_circuitReplaces the open circuit with the one in the spec and saves the code.
tinkercad_get_circuitReads the saved circuit back.
tinkercad_set_codeReplaces the sketch.
tinkercad_set_partChanges a part setting (knob position, sensor distance).
tinkercad_simulateRuns the simulator with button presses and serial input; returns LED, servo and serial readings.
tinkercad_screenshotReturns a picture of the editor.

Limits

  • One small breadboard per circuit, Arduino Uno only.
  • Tinkercad has no KY-023 joystick, LM35, HC-05 Bluetooth module, L298N or IR line sensor. The skill lists the usual stand-ins (two potentiometers, TMP36, the Serial Monitor, L293D, pushbuttons).
  • The simulator runs slower than real time, and LED readings come from a screenshot, so leave some margin in your timings. Hold buttons for at least 0.6 s.
  • Only one process can use the Chrome profile at a time.
  • If Tinkercad changes its editor internals, building will fail until the code is updated. npm run smoke tells you quickly whether it still works.

Documentation

Development

npm test          # unit tests for the spec and catalog, no browser needed

npm run smoke # builds and simulates two circuits in your Tinkercad account npm run parts-doc # regenerates docs/parts.md

The smoke test creates a design called "tinkercad-circuits-mcp smoke test". Pass its link to reuse it: npm run smoke -- https://www.tinkercad.com/things/ .

Issues and pull requests are welcome, especially new parts. Adding one is mostly finding its device id (the data-did attribute on the tile in Tinkercad's parts panel) and its pin names; How it works has the details.

License

MIT