原型 · 预览版:收录官方注册中心里的全部服务器,每 30 分钟同步一次。使用 Google 登录即可撰写评价。原型 · 每 30 分钟更新
PopNx MCP为使用 AI 的人准备的 MCP 服务器 · 用大白话讲清楚

MCP for OpenFilters

作者:BBrunoEsteves版本 0.2.2i★ 0i在你的电脑上运行代码仓库 ↗
注册名称io.github.BBrunoEsteves/mcp-for-openfilters

安装方法

What it does

Design, simulate and optimize optical thin-film coatings with the OpenFilters engine.

  • Connects 在你的电脑上运行
  • Account or key No key needed
  • Category 游戏、体育、美食与学习

为什么排在这里

列表按使用分(满分 100)排序,由以下部分组成

热度23/80GitHub 星标或每周下载量:较大的计 60,较小的计 20
新鲜度12/1230 天内有发布或代码更新得满分
仍在响应0/8上次检查时云端端点有响应
使用分35/100

质量: 基础检查通过 3/3 项(仅展示,不用于排序) · 上升势头: 暂无数据 (只用于“上升中”标签)

安装

选择你使用的 AI 应用,然后复制设置。

用一句话让 AI 帮你安装

请帮我安装 MCP for OpenFilters。按照 https://mcp.popnx.com/i/bbrunoesteves-mcp-for-openfilters.md 操作,先把命令给我看,等我同意后再运行。

粘贴到能在你电脑上工作的 AI(如 Claude Code、Cursor)。它会读取我们的步骤,先给你看命令,等你同意。无需密钥,无需注册。 · 查看 AI 会读取的全文

通过 3/3 项检查 · 在你的电脑上运行 · ✓ 命令已检查 2026年11月13日

第一步:你用哪个 AI?

选择你用的应用,步骤会显示在下方。

可连接 Claude,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用

让 AI 帮你安装

把这段话复制到 Claude 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude 安装 MCP server MCP for OpenFilters,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 MCP for OpenFilters 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开电脑版 Claude 应用的设置文件

    SettingsDeveloperEdit Config

  3. 粘贴这些设置并保存文件

    {
      "mcpServers": {
        "for-openfilters": {
          "command": "uvx",
          "args": [
            "mcp-for-openfilters"
          ]
        }
      }
    }
  4. 退出 Claude 再重新打开

  5. 试一试

    用 MCP for OpenFilters 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude 说正在使用 MCP for OpenFilters,或回答中出现 MCP for OpenFilters 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

ChatGPT 暂时无法连接 MCP for OpenFilters

MCP for OpenFilters 需要安装在你的电脑上,而 ChatGPT 只能连接在网上运行的服务器

你可以改用这些方式

A · 使用能连接 MCP for OpenFilters 的应用

  • 需要先在电脑上安装 Python (uv)(只需一次) · 仅限电脑上的 Claude 应用(Windows 或 Mac),网页和手机不可用
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)
  • 需要先在电脑上安装 Python (uv)(只需一次)

B · 游戏、体育、美食与学习 类中能连接 ChatGPT 的其他服务器

从同类中使用较多的里挑选,仅限用地址即可连接、无需密钥的

可连接 Claude Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Claude Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Claude Code 安装 MCP server MCP for OpenFilters,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):claude mcp add --scope user for-openfilters -- uvx mcp-for-openfilters 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 MCP for OpenFilters 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 打开终端

    Mac:按 Command+空格,输入 Terminal · Windows:打开 PowerShell

  3. 粘贴这条命令并按 Enter

    claude mcp add --scope user for-openfilters -- uvx mcp-for-openfilters
  4. 在 Claude Code 中输入 /mcp

    应能看到 MCP for OpenFilters 在列表中并显示已连接

  5. 试一试

    用 MCP for OpenFilters 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Claude Code 说正在使用 MCP for OpenFilters,或回答中出现 MCP for OpenFilters 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Anthropic 帮助页面核实 · 你的界面可能因版本略有不同

可连接 Cursor,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 Cursor 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 Cursor 安装 MCP server MCP for OpenFilters,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 MCP for OpenFilters 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 Cursor

    在 Cursor 中打开

    Cursor 会请你确认安装,点击 Install

  3. 在 Cursor 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 MCP for OpenFilters 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 Cursor 说正在使用 MCP for OpenFilters,或回答中出现 MCP for OpenFilters 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 Cursor 帮助页面核实 · 你的界面可能因版本略有不同

可连接 VS Code,但需要先准备

需要先在电脑上安装 Python (uv)(只需一次)

让 AI 帮你安装

把这段话复制到 VS Code 的对话里。AI 会先检查电脑,告诉你要改哪个文件,并且每次都等你同意。

请在这台电脑上为 VS Code 安装 MCP server MCP for OpenFilters,按顺序:1) 用 uv --version 检查是否有 uv。没有的话,请让我从 https://docs.astral.sh/uv/getting-started/installation/ 安装,不要自己安装。2) 只使用这份配置(已通过 PopNx MCP 检查):{ "servers": { "for-openfilters": { "type": "stdio", "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 告诉我要修改的文件完整路径或要运行的命令,等我同意。4) 不需要密钥。5) 按约定执行,然后确认 MCP for OpenFilters 的工具真的出现了。

这段话不包含你的密钥。如果需要密钥,AI 会请你自己粘贴到文件或应用的输入框里。

  1. 安装 uv(如果还没有)

    已经装好了吗?先检查 · 打开终端,输入这条命令后按 Enter

    uv --version
    • 显示版本号(例如 uv …)= 已安装,可跳过这一步
    • 显示 "command not found"(Windows 显示 "is not recognized")= 还没安装,或刚装好但需要关掉终端再重新打开
    怎么打开终端

    Mac:按 ⌘ + Space,输入 Terminal 后按 Enter

    Windows:打开“开始”菜单,输入 Windows PowerShell,然后选“打开”

    还没安装: uv 没有点选式安装程序。从 uv 官方页面复制适合你系统(macOS 或 Windows)的一行命令,粘贴到终端 · 不需要单独安装 Python,uv 会在需要时自动下载

    打开 uv 下载页 ↗

    装好后关掉终端再打开,重新运行同一条命令,应显示版本号: uv --version

    安装一次,所有需要 uv 的工具都能用

  2. 点击这个按钮打开 VS Code

    在 VS Code 中打开

    VS Code 会请你确认安装,点击 Install

  3. 在 VS Code 中以 Agent 模式打开 AI 聊天

  4. 试一试

    用 MCP for OpenFilters 告诉我你能帮我做什么,然后做一件给我看

    ✓ 如果 VS Code 说正在使用 MCP for OpenFilters,或回答中出现 MCP for OpenFilters 的工具名称,就表示连接成功

菜单名称已于 2026年11月11日 对照 VS Code 帮助页面核实 · 你的界面可能因版本略有不同

其他支持 MCP 的应用(如 Windsurf、Zed、Gemini CLI)添加方式各不相同,请在应用列表中查看

查看所有支持 MCP 的应用 →

JSON 设置在下方“开发者专用”中

卡住了?问问正在用 MCP for OpenFilters 的人💬 讨论 →
开发者专用:终端命令和 JSON 设置

安装在电脑上

Claude Code

claude mcp add --scope user for-openfilters -- uvx mcp-for-openfilters

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "for-openfilters": {
      "command": "uvx",
      "args": [
        "mcp-for-openfilters"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "for-openfilters": {
      "command": "uvx",
      "args": [
        "mcp-for-openfilters"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "for-openfilters": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "mcp-for-openfilters"
      ]
    }
  }
}

这些设置是根据作者在注册中心的条目生成的。如果 README 的写法不同,请以 README 为准。

一览

每周下载量i
1,187/周
许可证i
GPL-2.0
连接方式
在你的电脑上运行
最新版本i
0.2.2
发布到注册中心i
2026年11月7日
代码最后更新i
2026年11月7日
作者
BBrunoEsteves
软件包
pypi: mcp-for-openfilters
注册状态
活跃

哪些应用可以使用它

依据这个服务器的连接方式和各应用自己的文档,检查于 2026年11月10日。

在你的电脑上运行,适用于

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

全部应用及其优缺点 →

它能做什么

它在你的电脑上运行;安装后,工具列表会显示在你的 AI 应用中。

基础检查i

我们检查的是任何人都能看到的信息;我们没有阅读代码。不适用的检查项不计入总数。 · 检查于 2026年11月19日

  • ✓ 通过

    作者与仓库一致

    注册名称已通过 GitHub 账户 BBrunoEsteves 验证,该账户拥有此仓库

  • ✓ 通过

    仍在维护

    代码最后更新于12天前

  • ✓ 通过

    有许可证

    使用 GPL-2.0

  • – 不适用

    端点有响应

    它在你的电脑上运行,没有互联网端点

  • – 不适用

    使用 OAuth 登录

    在你的电脑上运行,改用本地设置

  • … 尚未检查

    工具描述中没有隐藏指令

    它在你的电脑上运行;我们只能读取互联网端点的工具列表

已公开的漏洞(OSV.dev)

OSV.dev 中没有 mcp-for-openfilters@0.2.2 的记录

只检查这个版本的包本身,不包括所有依赖 · 检查于 2026年11月15日

我们检查什么 → · JSON

作者:申请重新检查或报告信息错误
给作者:在 README 中加徽章

如果你是作者,可把这段代码贴到 README。徽章会链接回本页。

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/bbrunoesteves-mcp-for-openfilters.svg)](https://mcp.popnx.com/en/servers/bbrunoesteves-mcp-for-openfilters)

讨论

提问、分享技巧或报告无法使用。按“有帮助”数量排序。

还没有帖子,欢迎第一个提问或分享。

此处内容由用户撰写,不代表 PopNx 团队。

登录后发帖

用户评价

还没有评价

登录后写评价

与“游戏、体育、美食与学习”中的其他服务器比较i

  • 星标数多于此分类中其他 1614 个服务器的 0%
  • 发布到注册中心的时间比此分类中其他 1614 个服务器的 69% 更新
  • 基础检查结果等于或优于此分类中其他 1614 个服务器的 99%

与注册中心里这个分类中所有活跃的服务器比较。只有当发布者拥有该仓库时,星标数才计入。

常见问题

MCP for OpenFilters 安全吗?

它在 3 项适用的基础检查中通过了 3 项。我们没有阅读代码。在添加密钥或令牌之前,请先看看这个服务器要求哪些权限,并使用只具备所需权限的密钥。

它需要哪些密钥或代码?

注册中心没有列出必需的密钥,不过有些服务器会在首次使用时要求你登录。

它在我的电脑上运行还是在云端?

它在你的电脑上运行。你的 AI 应用会在需要时启动它,数据不会经过作者的服务器(除非它自己调用在线服务)。

它还在维护吗?

GitHub 仓库最后更新于12天前,最新版本(0.2.2)于12天前进入注册中心。

哪些应用可以使用它?

支持 MCP 的应用,例如 Claude Desktop、Claude Code、Cursor 和 VS Code。你的电脑上还需要有 Python (uv)。

有什么可以替代它?

同一分类中有:Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft, GoodWatch

功能相近的其他选择

同一分类、其他作者、命令已通过检查。官方的排在前面,再按星标排序。

如何看卡片:↓ 每周下载量i★ GitHub 星标i三大支柱:评价 · 检查 · 使用情况i更新 = 最新版本发布到注册中心的时间i

WilmAI

Finland's Wilma school system for parents and students: schedule, homework, exams and messages.

作者:aikarjal正在增长↓ 1399/周★ 89 整个仓库的星标10天前更新

在你的电脑上运行✓ 服务方 · wilm.ai

Savecraft

Savecraft serves real save game data and expert game knowledge to AI assistants.

作者:joshsymonds起步阶段★ 137个月前更新

在云端运行仓库已归档✓ 服务方 · savecraft.gg

GoodWatch

Find movies and TV shows, track watches, and get suggestions based on your taste.

作者:alp82起步阶段★ 50 整个仓库的星标30天前更新

在云端运行✓ 服务方 · goodwatch.app
与相似项目对比
本项
MCP for OpenFilters
Anime GardenWilmAILumify Sports IntelligenceSavecraftGoodWatch
运行位置需要安装在电脑上在云端运行,无需安装需要安装在电脑上在云端运行,无需安装在云端运行,无需安装在云端运行,无需安装
需要密钥否否否是否否
可在 Claude 中按 + 添加否否否否否否
基础检查3/34/43/34/43/44/4
许可证GPL-2.0AGPL-3.0MITMITApache-2.0MIT
价格登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用登记中未列出费用

作者的 README

打开 README

按原文从作者的仓库复制。PopNx MCP 没有审查或背书其内容。HTML、图片和脚本已被移除。链接会离开本站。

MCP for OpenFilters

*An unofficial connector built on OpenFilters: not affiliated with or endorsed by the OpenFilters authors or Polytechnique Montréal.*

Design, simulate and optimize optical thin-film coatings by talking to Claude.

This project is an MCP server around the calculation core of [OpenFilters](https://www.polymtl.ca/larfis/en/links) (Stéphane Larouche and Ludvik Martinu, Polytechnique Montréal), ported to Python 3 and run without its GUI. Claude plans the work and reads compact summaries; the server does the computing — in parallel on all CPU cores — and writes full results to disk, including .ofp project files that open in the OpenFilters GUI.

Claude orchestrates; the server computes. One tool call can launch a whole campaign.

Quick start

Pick the one that matches how you use Claude (details under Installation):

You useDo this
Claude DesktopDownload mcp-for-openfilters- .mcpb from the latest release and open it: Claude Desktop installs the extension.
Claude Codeclaude mcp add --scope user mcp-for-openfilters -- uvx mcp-for-openfilters (needs uv), or the plugin: /plugin marketplace add BBrunoEsteves/mcp-for-openfilters, then /plugin install mcp-for-openfilters@mcp-for-openfilters
Any MCP client, or no uvRun uvx mcp-for-openfilters, pip install mcp-for-openfilters (PyPI), or the installer from the release page, which also registers it in Claude Desktop and Claude Code.

Then, in a new chat: *"Run the MCP for OpenFilters server_info tool"*, and try *"Design an antireflection coating for BK7 from 430 to 670 nm with TiO2 and SiO2."* It is also listed in the official MCP Registry as io.github.BBrunoEsteves/mcp-for-openfilters.

Built and tested with Claude. The server follows the open MCP standard, but it has so far been

developed and tested only with Claude (Claude Desktop and Claude Code). Other MCP clients may work,

but they are untested: tool descriptions, plots and long-running jobs may behave differently there.

What it can do

AreaTools
Materialslist_materials, get_material_index, add_material (constant, Cauchy, Sellmeier, n,k tables from files), search_refractiveindex + import_refractiveindex_material (any of the ~3,500 entries of the refractiveindex.info database, downloaded on demand)
Single designdescribe_design, compute_spectrum (R/T/A, phase, GD, GDD; s/p/unpolarized or any polarization angle; any angle of incidence; reverse side), compute_angle_scan, compute_color, compute_electric_field, compute_monitoring_curves (chosen wavelengths or spectroscopic; reverse side)
Targets & meritevaluate_design, layer_sensitivity
Optimizationoptimize_design — OpenFilters' refinement, needle and step methods
Temperaturethermal_sensitivity (how a peak moves per index and thickness change of each material; dλ/dT, kelvin per FWHM, athermal dn/dT), thermal_sweep (peak versus temperature) — tunable and athermal filters
Campaignsrun_batch (parameter sweeps), run_optimization_campaign (many starts → ranked → optional yield stage), tolerance_analysis (Monte Carlo yield with thickness and index errors), simulate_random_errors (OpenFilters' Preproduction: mean, standard deviation and worst case of the curves)
Jobsjob_status, get_results, list_jobs, cancel_job — results survive a server restart
Filesload_project, save_project (native .ofp)

Example requests to Claude:

  • *"Design a dichroic on BK7 with R > 99 % at 532 and 1064 nm and T > 90 % at 633 nm for 0–20°, at most 40 layers of TiO2/SiO2. Run 100 needle optimizations from random starts and rank the best 10 by yield at ±1 % thickness error."*
  • *"Add my ALD Al2O3 from this ellipsometry file and sweep the AR coating thickness ±10 %."*
  • *"Find thin-film HfO2 data on refractiveindex.info, import it and redo the mirror with it."*
  • *"Where is the electric-field peak of this mirror at 1064 nm, and what monitoring signal should I expect at 633 nm at the end of each layer?"*

Ready-made workflows (prompts) appear as / commands in Claude Code and in the attachment menu of Claude Desktop: design an antireflection coating, a mirror, an edge filter or dichroic, a narrow band-pass filter, and review a design for manufacturing. The design-format guide, the material list and the OpenFilters example projects are available as resources (openfilters://guide, openfilters://materials, openfilters://examples/ ). Long optimizations and yield analyses report progress to apps that show it.

Installation

Requires Python ≥ 3.10. OpenFilters itself does not need to be installed: its calculation engine is built in (the OpenFilters GUI is only useful to open the .ofp files).

Claude Desktop extension (one click)

From the latest release, download mcp-for-openfilters- .mcpb and open it (or drag it onto Claude Desktop's Settings → Extensions). Claude Desktop runs it with uv, which fetches the server from PyPI.

Claude Code plugin

In Claude Code:

/plugin marketplace add BBrunoEsteves/mcp-for-openfilters

/plugin install mcp-for-openfilters@mcp-for-openfilters

The plugin runs the server with uvx (see claude-plugin/README.md for what it runs and downloads).

With uv (one command)

With uv installed, the server runs straight from PyPI, with the right package for your computer chosen automatically:

claude mcp add --scope user mcp-for-openfilters -- uvx mcp-for-openfilters

For Claude Desktop, add to claude_desktop_config.json (Settings → Developer → Edit config), then fully quit and reopen Claude Desktop:

{"mcpServers": {"mcp-for-openfilters": {"command": "uvx", "args": ["mcp-for-openfilters"]}}}

uvx keeps its own cached environment; uvx mcp-for-openfilters@latest picks up a new version.

With the installer

From the release page, download install_mcp_for_openfilters.py and the package for your computer (or all .whl files) into one folder, then:

python install_mcp_for_openfilters.py

It creates a private environment in ~/.mcp-for-openfilters, installs the package, registers the server in Claude Desktop (backing up its settings) and Claude Code, and runs a self-test. Then fully quit and reopen Claude Desktop. --uninstall removes it; --from-github downloads the packages with the GitHub CLI.

Packages are built for Windows (64-bit), Linux (x86-64) and macOS (Apple Silicon), Python 3.10–3.14, with the compiled fast core included: no compiler needed.

Manually
pip install mcp_for_openfilters-<version>-<python>-<platform>.whl

claude mcp add --scope user mcp-for-openfilters -- mcp-for-openfilters

For Claude Desktop, add to claude_desktop_config.json (Settings → Developer → Edit config):

{"mcpServers": {"mcp-for-openfilters": {"command": "<full path to mcp-for-openfilters>"}}}
Upgrading from openfilters-mcp (before 0.2.0)

The project was called *openfilters-mcp* until version 0.2.0. Fully quit Claude Desktop and Claude Code, then run the new installer: it removes the old openfilters registration and the old private environment (~/.openfilters-mcp) and registers mcp-for-openfilters. Your data folder ~/OpenFilters-MCP is kept and still used, and the old OPENFILTERS_MCP_* environment variables are still read. After a manual install, pip uninstall openfilters-mcp and replace the openfilters entry in your Claude settings.

From source (development)
git clone https://github.com/BBrunoEsteves/mcp-for-openfilters

cd mcp-for-openfilters python -m venv .venv .venv/Scripts/pip install -e ".[dev]" # .venv/bin/pip on macOS/Linux python dev/fetch_compiled.py # fast C++ core compiled by GitHub Actions (or build it locally)

Configuration
Environment variableDefaultMeaning
MCP_FOR_OPENFILTERS_HOME~/MCP-for-OpenFiltersdata folder: materials/, jobs/, projects/, outputs/
MCP_FOR_OPENFILTERS_WORKERSCPU count − 1parallel worker processes for jobs

The names used before 0.2.0 (OPENFILTERS_MCP_HOME, OPENFILTERS_MCP_WORKERS) still work, and an existing ~/OpenFilters-MCP folder is used when ~/MCP-for-OpenFilters does not exist.

Conventions

  • wavelengths and thicknesses in nm, angles in degrees, R/T/A as fractions (0–1);
  • complex index N = n − ik (k ≥ 0 absorbs), as in OpenFilters and Macleod;
  • layers are listed from the substrate outward;
  • the merit function is OpenFilters' χ² = Σ ((target − value)/tolerance)², with satisfied inequality targets contributing zero.

A design:

{"substrate": "FusedSilica", "incident_medium": "void", "center_wavelength": 550,

"layers": [{"material": "TiO2", "thickness": 58.6}, {"material": "SiO2", "qwot": 1}]}

or with a stack formula: {"formula": {"formula": "(HL)^8 H", "materials": {"H": "TiO2", "L": "SiO2"}}}.

Materials given as n,k tables have no data outside their wavelength range. There the design field "table_extrapolation" decides: "hold" (default: n,k stay at the value at the nearest end of the data), "openfilters" (OpenFilters' own extrapolation, identical to its GUI) or "refuse". Every result computed outside the data says so, with the n,k used and what the other choice would give; optimizations, campaigns and yield analyses do not start until the choice is made (Claude asks you).

A target:

{"kind": "R", "from": 1000, "to": 1100, "step": 5, "value": 0.99, "tolerance": 0.005,

"inequality": ">=", "angle": 0, "polarization": "unpolarized"}

Validation

The test suite (pytest) checks the ported core against analytic results (quarter-wave stacks) and an independent transfer-matrix implementation (dispersive dielectrics, absorbing metals, 0–60°, s/p/unpolarized; agreement < 1e-9) and textbook closed forms (quarter-wave antireflection and absentee layers, V-coat zero, Brewster angle, quarter-wave stack peak reflectance and stop-band width), round-trips every example project through .ofp files, and runs the refinement and needle optimizations of the OpenFilters examples.

How the port was made

src/openfilters_core is generated from the original OpenFilters 1.1.1 sources by tools/port_from_py2.py, an auditable script (mechanical Python 2 → 3 conversions, a short list of targeted fixes, package-relative imports). The _abeles C++ extension uses the Python 3 C-API port by Emil Kleijn; _moremath is ported by the same script. See src/openfilters_core/PROVENANCE.md.

Privacy

Everything runs on your computer: no data is sent anywhere and there is no telemetry. The only network access is downloading public refractiveindex.info data when you ask for it. See PRIVACY.md.

Citing

If you use this in published work, please cite OpenFilters:

S. Larouche and L. Martinu, "OpenFilters: open-source software for the design, optimization, and

synthesis of optical filters," *Applied Optics* 47, C219–C230 (2008).

Contact

  • Bug reports and feature requests: GitHub Issues (please include the ou

只显示了开头部分;其余内容请在仓库中阅读