iContact MCP by usefulapi
개요
제작자가 쓴 설명(영어 원문)
Read iContact contacts, lists, campaigns and message stats; add contacts and manage subscriptions.
PopNx MCP의 세 기둥
이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.
- 사용자 의견i아직 리뷰가 없어요리뷰는 다음 단계에서 계정 기능과 함께 열려요
- 우리의 기본 점검i3개 중 3개 통과공개된 정보로 점검했으며, 코드는 아직 스캔하지 않았어요
- 사용 정도i초기★ –
할 수 있는 일
이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.
- 연결 방식: 클라우드에서 실행
- 전송 방식: Streamable HTTP
- 카테고리: 마케팅 및 소셜 미디어
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
설치하기 전에
- 기본 점검: 3개 중 3개 통과
- 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
- 할 수 있는 일 20가지(도구) icontact_get_account, icontact_list_contacts, icontact_get_contact, icontact_create_contact …
- 레지스트리에 입력해야 할 키가 나와 있지 않아요.
필요한 것
- 클라우드에서 실행설치할 것 없음. 인터넷으로 연결돼요
어떤 앱을 쓰세요?
위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.
웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:
- Settings → Connectors 열기
- Add custom connector 누르기
- 아래 주소를 붙여 넣고 Add 누르기
- 로그인하라고 하면 제작자의 서비스에 로그인하기
https://icontact.usefulapi.io/mcp터미널에서 이 명령어를 실행하세요
claude mcp add --transport http icontact https://icontact.usefulapi.io/mcp또는 설정을 직접 복사하기
프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요
{
"mcpServers": {
"icontact": {
"url": "https://icontact.usefulapi.io/mcp"
}
}
}브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.
또는 설정을 직접 복사하기
프로젝트의 .vscode/mcp.json에 붙여 넣으세요
{
"servers": {
"icontact": {
"type": "http",
"url": "https://icontact.usefulapi.io/mcp"
}
}
}브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.
ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:
- 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
- Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
- 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
- 로그인하라고 하면 제작자의 서비스에 로그인하기
https://icontact.usefulapi.io/mcp메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.
선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
할 수 있는 일
도구 이름과 설명은 서버가 2026년 11월 9일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.
icontact_get_accountThe iContact account behind the credentials (company name, address, plan fields) and its client folders, with the folder this server uses. GET /a/ and GET /a/{accountId}/c/.
icontact_list_contactsList contacts (email, name, address, phone, status, create date). Filter by status, exact email, first/last name or a list the contact belongs to. GET /contacts.
icontact_get_contactOne contact by id. GET /contacts/{contactId}.
icontact_create_contactWRITE: add one contact to the account (it is not added to any list; use icontact_set_subscription for that). Not idempotent: an email that already exists is reported by iContact as a warning. POST /contacts.
icontact_update_contactWRITE: change fields of one contact; only the fields you pass are sent. Setting status to donotcontact or deleted stops mail to that contact. POST /contacts/{contactId}.
icontact_list_listsList the account's mailing lists (name, description, welcome-message settings). GET /lists.
icontact_get_listOne mailing list by id. GET /lists/{listId}.
icontact_list_subscriptionsList list memberships (subscriptionId, contactId, listId, status). Filter by list, contact or status. GET /subscriptions.
icontact_set_subscriptionWRITE: put a contact on a list (status normal, or pending to start double opt-in) or unsubscribe it (status unsubscribed). Only for contacts who agreed to receive mail. POST /subscriptions.
icontact_list_campaignsList campaigns (the sender identity and settings that messages belong to). GET /campaigns.
icontact_get_campaignOne campaign by id. GET /campaigns/{campaignId}.
icontact_list_messagesList messages (subject, type, campaign, create date, HTML and text bodies). Filter by type or campaign. GET /messages.
icontact_get_messageOne message by id, with subject and HTML/text bodies. GET /messages/{messageId}.
icontact_get_message_statisticsDelivery statistics of a message (released, bounces, opens, clicks, unsubscribes, complaints, forwards). GET /messages/{messageId}/statistics.
icontact_list_message_activityWho opened, clicked, bounced from or unsubscribed after a message: one page of events for one message. GET /messages/{messageId}/opens | clicks | bounces | unsubscribes.
icontact_list_sendsList sends (a message sent to lists/segments: send id, message id, included/excluded lists, scheduled time, status). GET /sends.
icontact_get_sendOne send by id. GET /sends/{sendId}.
icontact_list_segmentsList saved segments (rule-based groups of contacts). GET /segments.
icontact_get_segmentOne segment by id. GET /segments/{segmentId}.
icontact_list_custom_fieldsList the account's custom contact fields (name, type). GET /customfields.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 9일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)
- … 아직 점검 안 함
계속 관리되고 있음
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
- … 아직 점검 안 함
라이선스 있음
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
- ✓ 통과
엔드포인트 응답
9ms 만에 응답(HTTP 200)
- – 해당 없음
OAuth로 로그인
로그인 필요 없음
- ✓ 통과
도구 설명에 숨겨진 지시 없음
도구 설명 20개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요
마케팅 및 소셜 미디어 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 3631개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 3631개 중 96%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 3631개 중 100%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
iContact MCP by usefulapi, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.15.5)은 어제 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: MCP YouTube Transcript, Google Analytics MCP, BibiGPT YouTube Video Summarizer
대안
같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Google Analytics MCP
GA4 MCP server for AI agents: schema discovery, server-side aggregation, analysis-ready defaults.
BibiGPT YouTube Video Summarizer
AI video summarizer: summarize and transcribe YouTube, Bilibili, TikTok and podcast videos.
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
iContact MCP by usefulapi
Use iContact from Claude, Cursor, or any MCP client — work with your contacts, lists, messages and reports. Hosted, no local install: connect with your own iContact credentials.
Live endpoint: https://icontact.usefulapi.io/mcp · Homepage: https://usefulapi.io/icontact
Connect
- Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste
https://icontact.usefulapi.io/mcp. - Claude Code:
claude mcp add --transport http icontact https://icontact.usefulapi.io/mcp, then run/mcpto log in. - VS Code: Add to VS Code.
- Cursor and other clients: add the URL as a remote MCP server:
{
"mcpServers": { "icontact": { "url": "https://icontact.usefulapi.io/mcp" } } }
Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your iContact credentials.
Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/icontact/
On first connect you'll enter your iContact application id, username and API password (iContact's API Developer Portal). They are validated, stored per-user, and scoped to you — no keys in config files.
Tools
| Tool | Type | What it does |
|---|---|---|
icontact_get_account | read | Get account |
icontact_list_contacts | read | List contacts |
icontact_get_contact | read | Get contact |
icontact_create_contact | write | Create contact |
icontact_update_contact | write | Update contact |
icontact_list_lists | read | List mailing lists |
icontact_get_list | read | Get mailing list |
icontact_list_subscriptions | read | List subscriptions |
icontact_set_subscription | write | Subscribe or unsubscribe contact |
icontact_list_campaigns | read | List campaigns |
icontact_get_campaign | read | Get campaign |
icontact_list_messages | read | List messages |
icontact_get_message | read | Get message |
icontact_get_message_statistics | read | Get message statistics |
icontact_list_message_activity | read | List message activity |
icontact_list_sends | read | List sends |
icontact_get_send | read | Get send |
icontact_list_segments | read | List segments |
icontact_get_segment | read | Get segment |
icontact_list_custom_fields | read | List custom fields |
icontact_usage_status | meta | Usage status (free-tier meter) |
icontact_request_feature | meta | Request a missing feature |
icontact_upgrade | meta | Upgrade to Pro or Pro+ |
icontact_cancel_subscription | meta | Cancel the Pro subscription |
read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.
Pricing
| Plan | Price | Limit |
|---|---|---|
| Free | $0 | 50 tool calls / month |
| Pro (per account) | $9/mo or $90/yr (2 months free) | Unlimited* |
\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.
Pro covers this server only. Subscribe with icontact_upgrade (it returns a Stripe Checkout link). Cancel any time with icontact_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running icontact_upgrade before then undoes the cancel. Or write to support@usefulapi.io.
License
MIT — see LICENSE. Documentation only; the server is hosted.