프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Pyunto Diary

제작자: utagoeinc버전 0.3.0i★ 1i내 컴퓨터에서 실행
레지스트리 이름com.pyunto/diary

설치 방법

What it does

Read, search and write your encrypted Pyunto diary from Claude. Decrypts only on your own machine.

  • Connects 내 컴퓨터에서 실행
  • Account or key Needs PYUNTO_PASSWORD
  • Category 검색 및 AI 기억

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Pyunto Diary을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "diary": { "command": "uvx", "args": [ "pyunto-agent", "mcp" ], "env": { "PYUNTO_PASSWORD": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PYUNTO_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Pyunto Diary의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. Pyunto Diary에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Pyunto Diary 사이트 열기 ↗

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "diary": {
          "command": "uvx",
          "args": [
            "pyunto-agent",
            "mcp"
          ],
          "env": {
            "PYUNTO_PASSWORD": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude를 끄고 다시 열기

  6. 해 보기

    Pyunto Diary을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Pyunto Diary을 쓰고 있다고 하거나 답에 Pyunto Diary 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PYUNTO_AGENT_NAME Display name of this assistant's own Pyunto account, shown to the people in the diary · 기본값 Claude
  • PYUNTO_EMAIL Optional: sign in as a registered Pyunto account instead of creating the assistant's own
  • PYUNTO_AGENT_DIR Where the account's identity key, space keys and decrypted attachments are kept · 기본값 ~/.pyunto-agent

설명은 아직 영어 원문입니다.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Pyunto Diary에 연결할 수 없어요

Pyunto Diary는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Pyunto Diary에 연결되는 앱 쓰기

  • Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 검색 및 AI 기억에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Pyunto Diary을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user diary --env PYUNTO_PASSWORD=your-value -- uvx pyunto-agent mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PYUNTO_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Pyunto Diary의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. Pyunto Diary에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Pyunto Diary 사이트 열기 ↗

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user diary --env PYUNTO_PASSWORD=your-value -- uvx pyunto-agent mcp

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude Code에서 /mcp 입력

    Pyunto Diary이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    Pyunto Diary을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Pyunto Diary을 쓰고 있다고 하거나 답에 Pyunto Diary 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PYUNTO_AGENT_NAME Display name of this assistant's own Pyunto account, shown to the people in the diary · 기본값 Claude
  • PYUNTO_EMAIL Optional: sign in as a registered Pyunto account instead of creating the assistant's own
  • PYUNTO_AGENT_DIR Where the account's identity key, space keys and decrypted attachments are kept · 기본값 ~/.pyunto-agent

설명은 아직 영어 원문입니다.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Pyunto Diary을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "diary": { "command": "uvx", "args": [ "pyunto-agent", "mcp" ], "env": { "PYUNTO_PASSWORD": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PYUNTO_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Pyunto Diary의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. Pyunto Diary에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Pyunto Diary 사이트 열기 ↗

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Pyunto Diary 설정에서 PYUNTO_PASSWORD가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Pyunto Diary을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Pyunto Diary을 쓰고 있다고 하거나 답에 Pyunto Diary 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PYUNTO_AGENT_NAME Display name of this assistant's own Pyunto account, shown to the people in the diary · 기본값 Claude
  • PYUNTO_EMAIL Optional: sign in as a registered Pyunto account instead of creating the assistant's own
  • PYUNTO_AGENT_DIR Where the account's identity key, space keys and decrypted attachments are kept · 기본값 ~/.pyunto-agent

설명은 아직 영어 원문입니다.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

Pyunto Diary 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Pyunto Diary을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "diary": { "type": "stdio", "command": "uvx", "args": [ "pyunto-agent", "mcp" ], "env": { "PYUNTO_PASSWORD": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PYUNTO_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Pyunto Diary의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. Pyunto Diary에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Pyunto Diary 사이트 열기 ↗

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Pyunto Diary 설정에서 PYUNTO_PASSWORD가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Pyunto Diary을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Pyunto Diary을 쓰고 있다고 하거나 답에 Pyunto Diary 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PYUNTO_AGENT_NAME Display name of this assistant's own Pyunto account, shown to the people in the diary · 기본값 Claude
  • PYUNTO_EMAIL Optional: sign in as a registered Pyunto account instead of creating the assistant's own
  • PYUNTO_AGENT_DIR Where the account's identity key, space keys and decrypted attachments are kept · 기본값 ~/.pyunto-agent

설명은 아직 영어 원문입니다.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Pyunto Diary을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user diary --env PYUNTO_PASSWORD=your-value -- uvx pyunto-agent mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "diary": {
      "command": "uvx",
      "args": [
        "pyunto-agent",
        "mcp"
      ],
      "env": {
        "PYUNTO_PASSWORD": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "diary": {
      "command": "uvx",
      "args": [
        "pyunto-agent",
        "mcp"
      ],
      "env": {
        "PYUNTO_PASSWORD": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "diary": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "pyunto-agent",
        "mcp"
      ],
      "env": {
        "PYUNTO_PASSWORD": "your-value"
      }
    }
  }
}

직접 입력할 값

  • PYUNTO_AGENT_NAME env
    Display name of this assistant's own Pyunto account, shown to the people in the diary
  • PYUNTO_EMAIL env
    Optional: sign in as a registered Pyunto account instead of creating the assistant's own
  • PYUNTO_PASSWORD 비밀 필수 env
    Password for PYUNTO_EMAIL
  • PYUNTO_AGENT_DIR env
    Where the account's identity key, space keys and decrypted attachments are kept

설명은 아직 영어 원문입니다.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
35/주
확인된 도메인
✓ pyunto.com
라이선스i
Apache-2.0
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.3.0
레지스트리 공개i
2026년 9월 29일
코드 마지막 변경i
2026년 9월 29일
제작자
utagoeinc
패키지
pypi: pyunto-agent
웹사이트
pyunto.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 15일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 pyunto.com 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 2개월 전

  • ✓ 통과

    라이선스 있음

    Apache-2.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

아직 확인하지 않았습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

검색 및 AI 기억 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 6171개 중 76%보다 스타가 많아요
  • 이 카테고리의 다른 서버 6171개 중 45%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 6171개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Pyunto Diary, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: PYUNTO_PASSWORD

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.3.0)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: OpenSEO, Exa, Mockserver, Microsoft Learn MCP, Docs

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

OpenSEO

Keyword research, site audits, rank tracking and AI visibility for your AI agent.

제작자: every-app널리 사용됨★ 2.8만어제 업데이트

클라우드에서 실행✓ everyapp.com

Exa

Connect AI agents to Exa for web search, content fetching, and multi-step research.

제작자: exa-labs널리 사용됨★ 5.2천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · exa.aiPopNx 팀이 직접 써 봄

Mockserver

Mock, record/replay, verify and chaos-test any HTTP, REST, gRPC or LLM dependency over MCP.

제작자: mock-server성장 중★ 5천19일 전 업데이트

내 컴퓨터에서 실행✓ 서비스 회사 · mock-server.com

Microsoft Learn MCP

Official Microsoft Learn MCP Server – real-time, trusted docs & code samples for AI and LLMs.

제작자: MicrosoftDocs널리 사용됨★ 2천12개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · microsoft.comPopNx 팀이 직접 써 봄

Docs

Search and read Empryo's documentation. Read-only, no auth, no local access.

제작자: proxysoul성장 중★ 1.6천2개월 전 업데이트

클라우드에서 실행✓ empryo.com
  • OpenSEO — 클라우드에서 동작, 설치 불필요 · 키 불필요
  • Exa — 클라우드에서 동작, 설치 불필요 · 키 불필요 · Claude 디렉터리에 있음
  • Mockserver — 컴퓨터에 설치 필요 · 키 불필요
  • Microsoft Learn MCP — 클라우드에서 동작, 설치 불필요 · 키 불필요 · Claude 디렉터리에 있음
  • Docs — 클라우드에서 동작, 설치 불필요 · 키 불필요

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

pyunto-agent

Make an external agent the partner of a Pyunto exchange diary. The agent is an ordinary member: its own Pyunto account, its own X25519 identity key, invited with the normal invite link. The server is unchanged and never sees plaintext; decryption happens in this process.

Pyunto for iPhone and iPad · Pyunto for Android · pyunto-robotics — the same idea, with a robot at the other end (watch it, 100 s)

*A real run with Claude Code as the model: a strength-coach persona in a Markdown file, and a client logging sessions from their phone. The second reply compares with the day before. Watch the full 90-second video.*


Two kinds of agent

The same package, the same account, the same keys. What differs is who starts the conversation.

1. Agent — it writes to your users

You write; it replies, unprompted, in the same thread.

     your phone                     your computer

┌───────────────┐ ┌──────────────────────┐ │ Pyunto app │ │ pyunto-agent run │ │ │ │ │ │ "tough day │ ───────▶ │ reads the entry │ │ at work" │ encrypted │ decrypts it HERE │ │ │ │ │ │ │ │ │ ▼ │ │ "that sounds │ ◀─────── │ Claude API, or │ │ exhausting" │ encrypted │ Claude Code, or │ └───────────────┘ │ your own HTTP URL │ └──────────────────────┘ │ │ └──────── api.pyunto.com ──────┘ (ciphertext only, never plaintext)

How you invite it: run pyunto-agent pair, scan the QR code with the app, choose a diary. The agent starts answering as soon as you approve.

What it is for: running a service that reaches people where they already are.

A general-purpose chatbot is a website somebody has to remember to visit, in a tab with no memory of them. This is a named contact in a messaging app on their phone, who has read everything they wrote before, and who answers in character because you wrote the character.

That character is a file. --persona coach.md is the whole difference between a polite assistant and a service worth paying for:

You are a strength coach. Your client logs every session here.
  • Hold them to the programme. If they skipped legs again, say so plainly.
  • Always ask for the numbers: weight, sets, reps. A session without numbers is not logged.
  • Compare against last week before you praise anything.
  • No pep talk. One sentence of encouragement, only when it is earned.
pyunto-agent run --backend claude-api --persona coach.md

Some shapes this takes:

ServiceThe persona does what a chatbot will not
🏋️ Strength coachDemands the numbers, remembers last week's, refuses to praise a skipped session
🗣️ Language tutorCorrects every message, keeps a running list of the learner's own mistakes, escalates difficulty
🏥 Clinic follow-upAsks the post-operative questions in order, every day, and flags the answers a nurse should see
🥗 NutritionistReads the meal photographs, keeps the week's running total, notices the pattern rather than the meal
📚 Study supervisorHolds a student to a revision schedule, asks what was actually covered, will not accept "I studied"
🔧 Property managerTenants report a problem in the same thread each time; the agent triages, asks for a photograph, and escalates
📐 Field inspectionAn engineer photographs a site; the agent records it against the job and asks for what is missing
📅 Sobriety or habit supportChecks in at the hour that matters, keeps the streak, responds to a relapse the way you told it to

What makes these work here rather than in a chat window:

  • The persona holds. It is a file you control, not a prompt the user can talk their way out of.
  • It remembers. --history gives every reply the recent thread, so "the same as last Tuesday" means something.
  • It is on their phone. A notification arrives; they reply in a messaging app they already have. No login, no tab, no app to learn.
  • You see nothing. The diary is end-to-end encrypted and decrypted only in the process you run. That is a real claim to make to a client talking about their body, their health or their finances.
  • One process, many clients. With no --space, pyunto-agent run answers every diary the account has been invited into, so onboarding a client is them scanning a QR code. Use --space to pin one agent to one client.
2. MCP — you ask Claude about a diary

Nothing runs in the background. Claude Code or Claude Desktop reaches into the diary when you ask it to.

     your computer

┌────────────────────────┐ │ Claude Code / Desktop │ │ │ │ ┌──────────────────┐ │ ▼ │ │ your phone │ │ "what did I write │ │ Pyunto app │ │ about the garden?" │ │ │ │ │ │ │ the same diary, │ │ ▼ │ │ read and written│ │ ┌──────────────────┐ │ │ from either end │ │ │ pyunto-agent mcp │──┼──────▶ │ │ │ │ read_thread │ │encrypt │ │ │ │ post_entry │ │ └──────────────────┘ │ │ ...12 tools │ │ │ └──────────────────┘ │ └────────────────────────┘

How you invite it: add the server to your MCP client (below), then ask Claude to pair: the pair tool shows a QR code to scan in the Pyunto app. No terminal step is needed.

claude mcp add pyunto-diary -- uvx pyunto-agent mcp

What it is for: using your diary as memory. Searching months of entries, summarising a week, writing an entry from the desktop, letting Claude check what you recorded before it answers. You start every exchange; it never speaks unasked.

Which one?
Agent (run)MCP (mcp)
Who speaks firstthe agentyou
Runs in the backgroundyes, continuouslyno, only when asked
Where the person talks to itthe Pyunto app, on their phoneClaude Code / Desktop
Who it is fora service and its usersone person and their own diary
Typical usea coach, a tutor, a desk that answerssearching and summarising your entries

Both can be paired into the same diary at once — they are the same account, and nothing stops run answering on your phone while mcp reads the same entries from your desk.

A third kind lives elsewhere. pyunto-robotics puts a robot at the other end instead of a language model: you write "go and find some sunlight" and a simulated — or real — machine does it and reports back with photographs. It is built on this package, and pairs the same way.

Quick start: a personal trainer your clients message

Building a real service, from nothing to a client's phone.

1. Install

Python 3.11 or newer. Install into a virtual environment: Homebrew's Python refuses a global pip install (externally-managed-environment).

python3.12 -m venv ~/pyunto-env

source ~/pyunto-env/bin/activate pip install 'pyunto-agent[qr]'

Then choose where replies come from:

export ANTHROPIC_API_KEY=sk-ant-...    # the Claude API (used below), or

claude --version # Claude Code, if installed: no API key needed

With Claude Code, replace --backend claude-api below with --backend command --command 'claude -p --output-format json'. If neither is set up, pair and run say so and list the options before showing a QR code.

2. Write the trainer

This file is the service. Everything the trainer is — strict or gentle, what it insists on, what it refuses to let slide — is here, and your clients cannot talk it out of any of it.

cat > trainer.md <<'EOF'

You are a strength coach. Each client logs their sessions in this diary.

  • Always ask for the numbers: exercise, weight, sets, reps. "I trained today" is not a log -- ask what they lifted.
  • Compare against their recent sessions before responding. If the weight has not moved in three weeks, say so.
  • If they skipped a session, ask what happened. Once. Then move on.
  • No motivational speeches. One line of encouragement, only when the numbers earn it.
  • Never give medical advice. Pain goes to a doctor, and say so plainly.
  • Reply in the language they wrote in. Two to four sentences.

EOF

3. Make a QR code to hand out
pyunto-agent pair --operator "Sano Fitness" --image trainer-qr.png
Written to trainer-qr.png — send this to whoever should be able to reach the

agent. Each person who scans it lets 🤖 Claude into their own diary; the code names the account asking and nothing else.

Put that image on your booking page, in the welcome email, or printed on a card at the desk. It is not a secret and it does not expire: the same image works for every client. Scanning it only lets them *ask* — each client approves it into their own diary, on their own phone, and sees who is running it before they do.

Use .svg instead of .png for print, or when Pillow is not installed.

4. Start answering
pyunto-agent run --backend claude-api --persona trainer.md

It starts by naming every diary it answers in, so you can see which ones you were let into:

Answering in 2 diaries:

Sano Fitness - Aiko [2 members, answers every entry] 1552f3dc Sano Fitness - Ken [2 members, answers every entry] 3124f1b8 (cannot read it yet: open this space in the Pyunto app once)

One process serves every client who has scanned the code. A client writes:

Bench 80kg 5x5, felt heavy on the last set

and the trainer replies in their diary, having read what they lifted last week — as a notification on their phone, in an app they already have.

Each client's diary is separate and end-to-end encrypted. Decryption happens only in the process you are running; Pyunto's servers never see any of it.

Just trying it yourself?

Skip the persona and pair without an image — the QR code appears in the terminal, and the agent starts answering as soon as you scan it:

pyunto-agent pair --operator "your name"                       # with ANTHROPIC_API_KEY set

pyunto-agent pair --operator "your name" \ --backend command --command 'claude -p --output-format json' # or with Claude Code

Then open that space in the app once (that hands the agent the key) and write an entry.

Who it answers, and what members see
  • In a diary with one person and the agent, it answers every entry.
  • With three or more members (the agent counts), it answers only when it is mentioned by name, or when an entry is sent to everyone. An entry addressed to someone else does not wake it.
  • An entry written by another agent or a robot is answered only when it names this agent (@Claude). A robot's reports and another agent's check-ins are not replied to, so two programs in one diary never talk over the people in it or to each other in a loop.
  • A robo

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요