memry
ใช้ทำอะไรได้
ยังไม่มีคำอธิบายภาษาไทย ดูข้อเท็จจริงด้านล่าง หรือเปิดคำอธิบายต้นฉบับจากผู้ทำ
- ต่อแบบ ติดตั้งในเครื่อง
- บัญชีหรือคีย์ ไม่ต้องใส่คีย์
- หมวด เครื่องมือนักพัฒนา
คำอธิบายต้นฉบับจากผู้ทำ (อังกฤษ)
Persistent memory for AI coding agents. Install the memry CLI and run memry setup.ใช้คู่กับ
Skill ที่สอน AI ทำงานแบบนี้ ใช้ร่วมกับตัวนี้ได้
archify
archify เป็นเครื่องมือเสริมสำหรับ AI เช่น Claude Code และ Codex ใช้แปลงไอเดีย แผนงาน หรือโค้ดให้เป็นไดอะแกรมแบบโต้ตอบได้
ทำไมอยู่อันดับนี้
หน้ารายการเรียงด้วยคะแนนการใช้งาน (เต็ม 100) จากส่วนเหล่านี้
| ความนิยม | 9/80 | ดาว GitHub หรือยอดดาวน์โหลดต่อสัปดาห์ ค่ามากนับ 60 ค่าน้อยนับ 20 |
|---|---|---|
| ความสด | 12/12 | ออกรุ่นหรือแก้โค้ดใน 30 วัน ได้เต็ม |
| ระบบยังตอบ | 0/8 | endpoint บนคลาวด์ตอบตอนตรวจล่าสุด |
| คะแนนการใช้งาน | 21/100 |
คุณภาพ: ผลตรวจเบื้องต้นผ่าน 3/3 ข้อ (แสดงให้ดู ไม่ได้ใช้เรียง) · ความมาแรง: ยังไม่มีข้อมูล (ใช้เรียงเฉพาะแท็บมาแรง)
ติดตั้ง
เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง
ผลตรวจผ่าน 3/3 · ทำงานบนเครื่องคุณ
ขั้นแรก: คุณใช้ AI ตัวไหน
เลือกแอปที่คุณใช้ ขั้นตอนจะขึ้นด้านล่าง
Claude ยังต่อ memry ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
ChatGPT ยังต่อ memry ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
คุณทำแบบนี้แทนได้
ข · ตัวอื่นในหมวด เครื่องมือนักพัฒนา ที่ต่อกับ ChatGPT ได้
เลือกจากตัวที่ใช้มากในหมวดเดียวกัน เฉพาะตัวที่ต่อด้วยที่อยู่ได้โดยไม่ต้องใส่คีย์
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
Claude Code ยังต่อ memry ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
Cursor ยังต่อ memry ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
VS Code ยังต่อ memry ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
โปรแกรมอื่นที่ใช้ MCP ได้ เช่น Windsurf, Zed หรือ Gemini CLI มีวิธีเพิ่มต่างกัน ดูวิธีของแต่ละตัวในหน้ารวมโปรแกรม
ค่าตั้งแบบไฟล์ JSON อยู่ในหัวข้อ “สำหรับคนเขียนโค้ด” ด้านล่าง
สรุป
- ดาวน์โหลดต่อสัปดาห์i
- ไม่มียอดใน npm/PyPI
- การเชื่อมต่อ
- –
- รุ่นล่าสุดi
- 1.2.0
- ส่งเข้า registryi
- 20 ต.ค. 2569
- แก้โค้ดล่าสุดi
- 20 ต.ค. 2569
- ผู้ทำ
- mrtheroi
- เว็บผู้ทำ
- www.memry.com.mx
- สถานะใน registry
- ใช้งานอยู่
คู่มือที่เกี่ยวข้อง
ทำอะไรได้บ้าง
รันในเครื่องคุณ รายการเครื่องมือจะขึ้นในแอป AI หลังติดตั้ง
ผลตรวจเบื้องต้นi
เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 16 พ.ย. 2569
- ✓ ผ่าน
ตัวตนผู้ทำตรงกับ repo
ชื่อใน registry ยืนยันด้วยบัญชี GitHub mrtheroi ซึ่งเป็นเจ้าของ repo
- ✓ ผ่าน
ยังมีคนดูแล
มีการแก้โค้ดล่าสุด 27 วันที่ผ่านมา
- ✓ ผ่าน
มีสัญญาอนุญาต (license)
ใช้ MIT
- – ไม่เกี่ยว
endpoint ตอบ
ตัวนี้รันบนเครื่องคุณ ไม่มี endpoint บนอินเทอร์เน็ต
- – ไม่เกี่ยว
ล็อกอินแบบ OAuth
ตัวนี้รันบนเครื่อง ใช้ค่าที่ตั้งในเครื่องแทน
- … ยังไม่ตรวจ
คำอธิบายเครื่องมือไม่มีคำสั่งแอบแฝง
รันในเครื่องคุณ เราอ่านรายการเครื่องมือได้เฉพาะตัวที่มี endpoint บนอินเทอร์เน็ต
ผู้ทำ: ขอให้ตรวจใหม่ หรือแจ้งข้อมูลผิด
สำหรับผู้ทำ: ติดป้ายใน README
ถ้าคุณเป็นผู้ทำตัวนี้ คัดลอกโค้ดนี้ไปวางใน README ได้เลย ป้ายลิงก์กลับมาที่หน้านี้
[](https://mcp.popnx.com/th/servers/mrtheroi-memry)พูดคุย
ถาม แชร์เคล็ดลับ หรือแจ้งว่าใช้ไม่ได้ เรียงตามที่คนกดว่ามีประโยชน์
ยังไม่มีใครโพสต์ ถามหรือแชร์เป็นคนแรกได้เลย
ข้อความในส่วนนี้เขียนโดยผู้ใช้ ไม่ใช่ทีม PopNx
รีวิวจากผู้ใช้
ยังไม่มีรีวิว
เทียบกับตัวอื่นในหมวด เครื่องมือนักพัฒนาi
- ดาวมากกว่า 85% ของอีก 5950 ตัวในหมวดนี้
- ส่งรุ่นใหม่เข้า registry ล่าสุดกว่า 53% ของอีก 5950 ตัวในหมวดนี้
- ผลตรวจเบื้องต้นดีกว่าหรือเท่ากับ 100% ของอีก 5950 ตัวในหมวดนี้
เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo
คำถามที่พบบ่อย
memry ปลอดภัยไหม?
จากการตรวจเบื้องต้นของเรา ผ่าน 3 จาก 3 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น
ต้องใช้กุญแจหรือรหัสอะไรบ้าง?
registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก
ตัวนี้รันบนเครื่องหรือบนคลาวด์?
รันบนเครื่องของคุณ โปรแกรม AI จะเปิด server ขึ้นมาเองเมื่อใช้ ข้อมูลไม่ต้องผ่านเซิร์ฟเวอร์ของผู้ทำ (ยกเว้นตัวที่ไปเรียกบริการออนไลน์ต่อ)
ยังมีคนดูแลอยู่ไหม?
repo บน GitHub มีการแก้โค้ดล่าสุด 27 วันที่ผ่านมา และส่งรุ่นล่าสุด (1.2.0) เข้า registry 27 วันที่ผ่านมา
ใช้กับโปรแกรมไหนได้บ้าง?
โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code
มีตัวไหนใช้แทนได้บ้าง?
ในหมวดเดียวกันมี GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
ตัวอื่นที่ทำงานคล้ายกัน
หมวดเดียวกันจากผู้ทำคนอื่น ผ่านตัวตรวจคำสั่งแล้ว ตัวทางการขึ้นก่อน แล้วเรียงตามดาว
อ่านการ์ด:↓ ดาวน์โหลดต่อสัปดาห์i★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Cloudflare MCP
Cloudflare MCP servers
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| ตัวนี้ memry | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| ทำงานที่ไหน | ต้องลงในเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง | มีทั้งบนคลาวด์และแบบลงเครื่อง |
| ต้องใส่คีย์ | ไม่ | ไม่ | ไม่ | ไม่ | ไม่ | ไม่ |
| กด + ใน Claude ได้ | ไม่ | ไม่ | ไม่ | ใช่ | ไม่ | ไม่ |
| ผลตรวจเบื้องต้น | 3/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| สัญญาอนุญาต | MIT | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| ราคา | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน |
README จากผู้ทำ
เปิดอ่าน README
ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ
memry
memry gives your AI coding agents a persistent memory that carries over between sessions and projects. Decisions, bug fixes and discoveries saved in one session are available in the next one, so you do not have to explain the same context again.
Requirements
- macOS, Linux or Windows (amd64 or arm64)
- At least one supported agent. For Claude Code, its CLI (
claude) must be on yourPATH.
Install
With Homebrew:
brew install mrtheroi/tap/memry
memry setup
Other ways to install memry, a single binary with no other dependency:
- With Go:
go install github.com/mrtheroi/memry-cli/cmd/memry@latest. The binary lands in$(go env GOPATH)/bin, which must be on yourPATH. - From a release: download the
memry_ _ _ .tar.gzarchive for your system, check it againstchecksums.txt, and put thememrybinary from it on yourPATH, for example:
tar -xzf memry_1.0.0_darwin_arm64.tar.gz memry
sudo install -m 0755 memry /usr/local/bin/memry
On Windows, see Windows.
Your agents run memry from the path it is installed at, so outside Homebrew keep the binary where it is, or run memry setup again after you move it.
memry setup asks for your email, sends you a 6-digit login code, then asks which agents you use and connects memry to each one you select (the ones found on your machine are preselected; press space to select, enter to confirm). Start a new session in your agent afterwards to use it.
To choose the agents without the prompt, for example in a script, pass their keys:
memry setup --agents=claude-code,codex
Run memry setup again to change the selection; memry is removed from agents you deselect.
Claude Code plugin
This repository is also a Claude Code plugin marketplace. Its memry plugin adds a /memry:setup skill that walks you through installing the CLI and running memry setup.
From your terminal:
claude plugin marketplace add mrtheroi/memry-cli
claude plugin install memry@memry
Or inside a Claude Code session:
/plugin marketplace add mrtheroi/memry-cli
/plugin install memry@memry
On Claude Code 2.1.275 or later, one in-session command does both: /plugin install memry --marketplace mrtheroi/memry-cli.
The plugin does not register the MCP server itself; memry setup does, so memry is never connected twice.
Self-hosted
On a self-hosted memry server, your admin creates a token for you instead of the email login. Connect with:
memry setup --url https://memry.company.internal --token
--url is required with --token, so the token is never sent to the public server. Setup asks for the token without showing it, checks it with the server before saving it, then asks which agents you use as usual. For scripts, set the MEMRY_TOKEN environment variable: with --token and no value, setup uses it instead of the prompt, also with --no-interaction, and the token stays out of the process list. --token= also skips the prompt (and wins over MEMRY_TOKEN), but the token then lands in your shell history and the process list.
MEMRY_TOKEN="$token" memry setup --url https://memry.company.internal --token --no-interaction
MEMRY_TOKEN is only read together with --token, so it never changes the email login.
Use an https:// URL. Setup sends your token or login code to the server, and memry mcp sends the saved token with every request, so a plain http:// URL is only accepted for this machine (localhost, a 127.x.x.x address or [::1]). For any other http:// server setup stops before asking or sending anything: "Refusing to send credentials over plain HTTP to . Use an https:// URL, or pass --insecure to allow it (for example on a trusted LAN).". Pass --insecure only on a network you trust: the credentials then travel in clear text. The same rule applies to MEMRY_URL.
Windows
Install with WinGet, then run setup in a new terminal so the memry command is on your PATH:
winget install Memry.Memry
memry setup
Other ways to install it:
- With Go:
go install github.com/mrtheroi/memry-cli/cmd/memry@latest. The binary lands in%GOPATH%\bin(go env GOPATH), which must be on yourPATH. - From a release: download
memry_ _windows_ .zip(amd64orarm64), check it againstchecksums.txt(signed with cosign, see the cosign command in the release process), and putmemry.exefrom it on yourPATH.
Update with winget upgrade Memry.Memry. To uninstall, run memry uninstall, then winget uninstall memry; for a manual install, memry uninstall prints the path of the memry.exe to delete.
What differs from macOS and Linux:
- Config file.
%USERPROFILE%\.config\memry\config.json, readable only by your user. memry finds your home inUSERPROFILE, thenHOME, then two levels aboveLOCALAPPDATA; without any, it stops with "Could not find your home directory; set USERPROFILE or HOME." (on every OS, an unset home is an error). Use--configorMEMRY_CONFIGto put it elsewhere. - Claude Code. Setup registers memry as a local
memry mcpserver (claude mcp add --transport stdio --scope user memry -- mcp) and adds the same SessionStart hook. Bothclaude.exeandclaude.cmdare supported. - The hook runs `memry` by its name, so
memrymust be on yourPATH. WinGet guarantees it; withgo install, add%GOPATH%\binto yourPATH. Claude Code hands its ownPATHto the hook, so after installing, restart the terminal or editor (VS Code, JetBrains) you start Claude Code from; a window opened before the install does not seememry, and the hook then loads no context without any error. If you run Claude Code with CMD instead of Git Bash, CMD searches the current directory first, so do not start sessions in a folder that contains an untrustedmemry.exe. - Antivirus and SmartScreen.
memry.exeis not Authenticode-signed, so SmartScreen or your antivirus may warn about it. To check a download, verify the signedchecksums.txtas described in CONTRIBUTING.md and compare the archive's SHA-256. - Terminals without color support. In a legacy console, the agent question is replaced by
Agents: (pass --agents to choose).and keeps the defaults; use--agentsto choose.
Custom config file
By default memry keeps your login in ~/.config/memry/config.json. To use another file, set the MEMRY_CONFIG environment variable or pass the global --config (or --config= ) option to setup, uninstall and delete-account:
memry setup --config ~/work/memry.json
The precedence is --config, then MEMRY_CONFIG, then the default; each applies to that one process. Setup passes the file on to the commands it registers in your agents, so they read the same login.
Supported agents
| Agent | Key | What memry setup adds |
|---|---|---|
| Claude Code | claude-code | The memry MCP server (user scope) and a hook that loads your memories when a session starts. |
| Codex | codex | The memry MCP server in ~/.codex/config.toml and memry instructions in ~/.codex/AGENTS.md. |
| OpenCode | opencode | The memry MCP server in ~/.config/opencode/opencode.json and memry instructions in ~/.config/opencode/AGENTS.md. |
| Antigravity | antigravity | The memry MCP server in ~/.gemini/config/mcp_config.json and memry instructions in ~/.gemini/config/GEMINI.md. |
| Windsurf | windsurf | The memry MCP server in ~/.codeium/windsurf/mcp_config.json and memry instructions in its global rules (~/.codeium/windsurf/memories/global_rules.md). |
Setup only adds memry's own entries: everything else in those files is kept, and memry uninstall removes just what setup added. Your login token is never written to an agent's files.
How it works
- Login by email code. You sign in with a one-time code sent to your email; there is no password to remember.
- Agent integration. Setup registers a
memryMCP server in each agent you select, which gives the agent the tools to save and search memories. - Context at session start. Each new session loads the recent memories of the current project, so your agent picks up where you left off. Claude Code loads them with a hook (also on resumed and compacted sessions); the other agents are instructed to load them as their first step.
- Projects. By default, a repository's project is its directory name. To group several repositories into one project (for example, the backend and frontend of one product), add a
.memry.jsonfile at the root of each repository:
{"project": "my-product"}
Usage metrics (opt-in)
memry sends no telemetry. If you want the memry dashboard to chart your Claude Code token usage and cost, turn it on explicitly:
memry usage enable # off by default
memry usage status # on or off as far as memry can see, and where to (never prints the token) memry usage disable # turn it off again
memry usage enable tells you what is sent, asks your memry server for a usage token (it can only send usage metrics) and sets Claude Code's OpenTelemetry metrics export in the env of ~/.claude/settings.json (or $CLAUDE_CONFIG_DIR/settings.json, a relative CLAUDE_CONFIG_DIR resolved against the current directory): CLAUDE_CODE_ENABLE_TELEMETRY, OTEL_METRICS_EXPORTER, OTEL_EXPORTER_OTLP_METRICS_PROTOCOL, OTEL_EXPORTER_OTLP_METRICS_ENDPOINT, OTEL_EXPORTER_OTLP_METRICS_HEADERS, and every OTEL_METRICS_INCLUDE_* gate set to false. Restart Claude Code to apply it. The settings file holds the usage token, so memry leaves it readable by your user only.
What is sent and what is kept
- Claude Code decides what it sends, as documented in its monitoring guide: metrics such as token usage, cost, sessions and lines of code, with identity attributes such as your email and organization id and metric-specific attributes. That list is not exhaustive and may grow with new Claude Code versions. memry turns off the optional attribute gates it can.
- The memry server is the guarantee. It keeps only the token and cost data points (the count or cost, the model, the token type, the query source and the time window), tied to your memry account, and discards everything else on receipt. It stores no raw attributes: only a keyed hash of them, to tell series apart.
- memry does not turn on Claude Code's logs or traces, so no prompts or code are sent through it.
What memry checks, and what it cannot see
Before asking for a token, enable checks the environment of the shell it runs in, your settings.json and Claude Code's file-based managed settings (managed-settings.json and managed-settings.d/*.json in /Library/Application Support/ClaudeCode on macOS, `/etc/claude-co