Global law
The law of nearly every country on earth, any date: read it, see what changed it, check citations.
EU AI Act compliance scanner for Python AI agents. 14 tools across 6 articles.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 7/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 7/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 14/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Air Blackbox MCP 설치해 줘. https://mcp.popnx.com/i/airblackbox-air-blackbox-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Air Blackbox MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "air-blackbox": { "command": "uvx", "args": [ "air-blackbox-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Air Blackbox MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"air-blackbox": {
"command": "uvx",
"args": [
"air-blackbox-mcp"
]
}
}
}Air Blackbox MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Air Blackbox MCP을 쓰고 있다고 하거나 답에 Air Blackbox MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Air Blackbox MCP에 연결할 수 없어요
Air Blackbox MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Air Blackbox MCP에 연결되는 앱 쓰기
B · 법률 및 정부 데이터에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Air Blackbox MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user air-blackbox -- uvx air-blackbox-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Air Blackbox MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user air-blackbox -- uvx air-blackbox-mcpAir Blackbox MCP이 목록에 있고 연결됨으로 보이면 돼요
Air Blackbox MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Air Blackbox MCP을 쓰고 있다고 하거나 답에 Air Blackbox MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Air Blackbox MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "air-blackbox": { "command": "uvx", "args": [ "air-blackbox-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Air Blackbox MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Air Blackbox MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Air Blackbox MCP을 쓰고 있다고 하거나 답에 Air Blackbox MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Air Blackbox MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "air-blackbox": { "type": "stdio", "command": "uvx", "args": [ "air-blackbox-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Air Blackbox MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Air Blackbox MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Air Blackbox MCP을 쓰고 있다고 하거나 답에 Air Blackbox MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user air-blackbox -- uvx air-blackbox-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"air-blackbox": {
"command": "uvx",
"args": [
"air-blackbox-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"air-blackbox": {
"command": "uvx",
"args": [
"air-blackbox-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"air-blackbox": {
"type": "stdio",
"command": "uvx",
"args": [
"air-blackbox-mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 airblackbox 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 34일 전
Apache-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 air-blackbox-mcp@0.2.0 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/airblackbox-air-blackbox-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 34일 전 변경됐고, 최신 버전(0.2.0)은 7개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: Global law, Open Legal Data (Germany), LibreJustice, InfraNode, Fedlex Connector
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
The law of nearly every country on earth, any date: read it, see what changed it, check citations.
German court decisions (Rechtsprechung) and laws (Gesetze) with citation graph and citation checks.
Search French-language and European case law and French legal texts (codes, statutes, treaties).
Keyless open data for 84 German cities: 12 lean read-only MCP tools covering 67 data types.
Search Swiss federal legislation: laws, articles, amendments via the Fedlex SPARQL endpoint.
| 이 항목 Air Blackbox MCP | Global law | Open Legal Data (Germany) | LibreJustice | InfraNode | Fedlex Connector | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 4/4 | 4/4 |
| 라이선스 | Apache-2.0 | NOASSERTION | MIT | Apache-2.0 | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
EU AI Act compliance scanning for Claude Desktop, Claude Code, Cursor, and any MCP-compatible client.
Unlike other compliance scanners that only report problems, AIR Blackbox also remediates - generating working code fixes, trust layer integrations, GDPR compliance checks, bias analysis, and full compliance reports. Under the hood, the scanning feeds into air-trust, a cryptographic audit chain (HMAC-SHA256) with Ed25519 signed handoffs that ensures compliance data integrity.
| Tier | Tool | What it does | Requires SDK |
|---|---|---|---|
| Scanning | scan_code | Scan a code string for all 6 EU AI Act articles (Python, notebooks, TypeScript, JavaScript, Java, Kotlin with the SDK; Python without) | Recommended |
| Scanning | scan_file | Read and scan a single source file | Recommended |
| Scanning | scan_project | Recursively scan a project directory | Recommended |
| Analysis | analyze_with_model | Deep analysis via local fine-tuned model (Ollama) | No |
| Analysis | check_injection | Detect prompt injection attacks (15 patterns) | No |
| Analysis | classify_risk | Classify tools by EU AI Act risk level | No |
| Remediation | add_trust_layer | Generate trust layer integration code | No |
| Remediation | suggest_fix | Get article-specific fix recommendations | No |
| Documentation | explain_article | Technical explanation of EU AI Act articles | No |
| Documentation | generate_compliance_report | Full markdown compliance report | No |
| GDPR | scan_gdpr | GDPR-specific compliance scan | Yes |
| Bias | scan_bias | Bias and fairness analysis | Yes |
| Validation | validate_action | Validate agent actions before execution (Article 14) | Yes |
| History | compliance_history | View past scans, trends, and compliance scores | Yes |
LangChain, CrewAI, AutoGen, OpenAI, Haystack, LlamaIndex, Semantic Kernel, Google ADK, Claude Agent SDK, and generic RAG pipelines.
pip install air-blackbox-mcp[full]
Installs the air-blackbox SDK (>=1.17,<2). The scanning tools then run the same engine as the air-blackbox CLI and read Python, Jupyter notebooks, TypeScript, JavaScript, Java and Kotlin, with the same verdict the CLI gives the same code. The floor is the version this package is tested against, and the major cap means a 2.x SDK cannot silently change your findings.
pip install air-blackbox-mcp
Works standalone with the lightweight built-in scanner: Python files only, a smaller rule set.
This package supports both MCP SDK generations — `mcp>=1.0`, no upper bound.
mcp 2.0 removed mcp.server.fastmcp and replaced FastMCP with MCPServer. Rather than pin away from it, the server detects which generation is installed and binds to the right class, so it runs on 1.x and 2.x alike:
| installed | server class |
|---|---|
mcp 1.x | FastMCP |
mcp 2.x | MCPServer |
Both paths are covered by tests that launch python -m air_blackbox_mcp as a real subprocess and drive it over stdio — the same way Claude Desktop and Cursor do — and the full suite runs green on both.
If you are on 0.2.3, upgrade. That version declared an unpinned mcp>=1.0.0, so once mcp 2.0 shipped, every fresh install produced a server that died on import:
ModuleNotFoundError: No module named 'mcp.server.fastmcp'
pip install --upgrade air-blackbox-mcp
0.2.4 fixed it by capping at mcp<2; 0.3.0 removes the cap entirely, so this server no longer conflicts with anything built for mcp 2.x sharing the same environment.
Edit ~/Library/Application Support/Claude/claude_desktop_config.json:
{
"mcpServers": { "air-blackbox": { "command": "python3", "args": ["-m", "air_blackbox_mcp"] } } }
Restart Claude Desktop. The 14 tools will appear automatically.
Add to .cursor/mcp.json in your project:
{
"mcpServers": { "air-blackbox": { "command": "python3", "args": ["-m", "air_blackbox_mcp"] } } }
Or add to .claude/mcp.json for Claude Code.
In Claude Desktop, Claude Code, or Cursor, just ask:
send_email"The full air-blackbox SDK unlocks 4 additional tools:
scan_gdpr)scan_bias)validate_action)compliance_history)For AI-powered analysis beyond regex patterns:
# Install Ollama
brew install ollama
ollama pull air-compliance-v2
Other MCP compliance tools only scan. AIR Blackbox:
Which engine runs is decided once, at import, by what is installed, and every result says which one ran. Until 0.4.0 the scanning tools always used the built-in scanner even when the SDK was installed; the two had drifted (fewer checks here, Python only, and a hiring-detection bug the SDK had fixed), so the same code got different verdicts from the CLI and from Claude.
| Tools | Engine | If the SDK is missing |
|---|---|---|
scan_code, scan_file, scan_project (and the rule-based part of analyze_with_model) | The air-blackbox SDK when installed, otherwise the built-in rule-based scanner | Built-in scanner: Python only, smaller rule set |
check_injection, classify_risk | Always the built-in rules | No effect |
Tier 5 (scan_gdpr, scan_bias, validate_action, compliance_history) | Always the full air-blackbox SDK | Explicit error telling you to install [full] |
The choice is made when the server starts, not per call, and provenance.engine names it on every result, so two reports are comparable exactly when their engine and ruleset_version match.
Because a compliance finding is only comparable to another if you know what produced it, every machine-readable result carries a `provenance` block:
{
"findings": [ ... ], "provenance": { "engine": "builtin-rules", "scanner_version": "0.2.4", "ruleset_id": "eu-ai-act-art9-15", "ruleset_version": "cee71577c486", "sdk_version": null } }
engine — builtin-rules or air-blackbox-sdk, whichever actually ran.ruleset_version — a content hash of the active rules, not a hand-maintained string. Change a regex and it changes by itself; a version someone must remember to bump is one that eventually misreports which rules ran.sdk_version — the SDK that *produced* this result, so it is null for built-in results even when the SDK is installed alongside. Reporting a version that contributed nothing would imply its rules ran.Two reports with the same engine + ruleset_version were produced by byte-identical rules and can be diffed directly. Different values mean the rules moved, and the diff needs that context to be meaningful.
Errors carry provenance too — knowing which version produced an error is as useful as knowing which version produced a finding.
Install [full] to unlock the Tier 5 SDK tools; the base install works standalone.
This MCP server is part of the AIR Blackbox ecosystem: