What it does
Design, simulate and optimize optical thin-film coatings with the OpenFilters engine.
- Connects 내 컴퓨터에서 실행
- Account or key No key needed
- Category 게임, 스포츠, 음식 및 학습
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 23/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 35/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
MCP for OpenFilters 설치해 줘. https://mcp.popnx.com/i/bbrunoesteves-mcp-for-openfilters.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
AI에게 설치 맡기기
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server MCP for OpenFilters을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP for OpenFilters의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
uv 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --version- 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
uv --version한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
컴퓨터용 Claude 앱 설정 파일 열기
SettingsDeveloperEdit Config
이 설정을 붙여 넣고 저장
{ "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } }Claude를 끄고 다시 열기
해 보기
MCP for OpenFilters을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 MCP for OpenFilters을 쓰고 있다고 하거나 답에 MCP for OpenFilters 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 MCP for OpenFilters에 연결할 수 없어요
MCP for OpenFilters는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · MCP for OpenFilters에 연결되는 앱 쓰기
- 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
- 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
- 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
- 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
B · 게임, 스포츠, 음식 및 학습에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- ShipSwift✓ ChatGPT
- Anime Garden✓ ChatGPT
- Summer Engine✓ ChatGPT
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server MCP for OpenFilters을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user for-openfilters -- uvx mcp-for-openfilters 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP for OpenFilters의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
uv 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --version- 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
uv --version한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
터미널 열기
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
이 명령을 붙여 넣고 Enter
claude mcp add --scope user for-openfilters -- uvx mcp-for-openfiltersClaude Code에서 /mcp 입력
MCP for OpenFilters이 목록에 있고 연결됨으로 보이면 돼요
해 보기
MCP for OpenFilters을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 MCP for OpenFilters을 쓰고 있다고 하거나 답에 MCP for OpenFilters 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server MCP for OpenFilters을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "for-openfilters": { "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP for OpenFilters의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
uv 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --version- 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
uv --version한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Cursor에서 AI 채팅을 Agent 모드로 열기
해 보기
MCP for OpenFilters을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 MCP for OpenFilters을 쓰고 있다고 하거나 답에 MCP for OpenFilters 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server MCP for OpenFilters을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "for-openfilters": { "type": "stdio", "command": "uvx", "args": [ "mcp-for-openfilters" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP for OpenFilters의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
uv 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --version- 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
uv --version한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
VS Code에서 AI 채팅을 Agent 모드로 열기
해 보기
MCP for OpenFilters을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 MCP for OpenFilters을 쓰고 있다고 하거나 답에 MCP for OpenFilters 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
개발자용: 터미널 명령과 JSON 설정
컴퓨터에 설치
Claude Code
claude mcp add --scope user for-openfilters -- uvx mcp-for-openfiltersClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"for-openfilters": {
"command": "uvx",
"args": [
"mcp-for-openfilters"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"for-openfilters": {
"command": "uvx",
"args": [
"mcp-for-openfilters"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"for-openfilters": {
"type": "stdio",
"command": "uvx",
"args": [
"mcp-for-openfilters"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
한눈에 보기
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 BBrunoEsteves 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 12일 전
- ✓ 통과
라이선스 있음
GPL-2.0 사용
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
공개된 취약점 (OSV.dev)
OSV.dev에 mcp-for-openfilters@0.2.2 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/bbrunoesteves-mcp-for-openfilters)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
게임, 스포츠, 음식 및 학습 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 1611개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 1611개 중 69%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 1611개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
MCP for OpenFilters, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 12일 전 변경됐고, 최신 버전(0.2.2)은 12일 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft, GoodWatch
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
WilmAI
Finland's Wilma school system for parents and students: schedule, homework, exams and messages.
Lumify Sports Intelligence
Schedules, scores, odds, splits & explainable AI bet confidence — 8+ sports, free instant key.
Savecraft
Savecraft serves real save game data and expert game knowledge to AI assistants.
GoodWatch
Find movies and TV shows, track watches, and get suggestions based on your taste.
| 이 항목 MCP for OpenFilters | Anime Garden | WilmAI | Lumify Sports Intelligence | Savecraft | GoodWatch | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 3/3 | 4/4 | 3/4 | 4/4 |
| 라이선스 | GPL-2.0 | AGPL-3.0 | MIT | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
MCP for OpenFilters
*An unofficial connector built on OpenFilters: not affiliated with or endorsed by the OpenFilters authors or Polytechnique Montréal.*
Design, simulate and optimize optical thin-film coatings by talking to Claude.
This project is an MCP server around the calculation core of [OpenFilters](https://www.polymtl.ca/larfis/en/links) (Stéphane Larouche and Ludvik Martinu, Polytechnique Montréal), ported to Python 3 and run without its GUI. Claude plans the work and reads compact summaries; the server does the computing — in parallel on all CPU cores — and writes full results to disk, including .ofp project files that open in the OpenFilters GUI.
Claude orchestrates; the server computes. One tool call can launch a whole campaign.
Quick start
Pick the one that matches how you use Claude (details under Installation):
| You use | Do this |
|---|---|
| Claude Desktop | Download mcp-for-openfilters- .mcpb from the latest release and open it: Claude Desktop installs the extension. |
| Claude Code | claude mcp add --scope user mcp-for-openfilters -- uvx mcp-for-openfilters (needs uv), or the plugin: /plugin marketplace add BBrunoEsteves/mcp-for-openfilters, then /plugin install mcp-for-openfilters@mcp-for-openfilters |
| Any MCP client, or no uv | Run uvx mcp-for-openfilters, pip install mcp-for-openfilters (PyPI), or the installer from the release page, which also registers it in Claude Desktop and Claude Code. |
Then, in a new chat: *"Run the MCP for OpenFilters server_info tool"*, and try *"Design an antireflection coating for BK7 from 430 to 670 nm with TiO2 and SiO2."* It is also listed in the official MCP Registry as io.github.BBrunoEsteves/mcp-for-openfilters.
Built and tested with Claude. The server follows the open MCP standard, but it has so far been
developed and tested only with Claude (Claude Desktop and Claude Code). Other MCP clients may work,
but they are untested: tool descriptions, plots and long-running jobs may behave differently there.
What it can do
| Area | Tools |
|---|---|
| Materials | list_materials, get_material_index, add_material (constant, Cauchy, Sellmeier, n,k tables from files), search_refractiveindex + import_refractiveindex_material (any of the ~3,500 entries of the refractiveindex.info database, downloaded on demand) |
| Single design | describe_design, compute_spectrum (R/T/A, phase, GD, GDD; s/p/unpolarized or any polarization angle; any angle of incidence; reverse side), compute_angle_scan, compute_color, compute_electric_field, compute_monitoring_curves (chosen wavelengths or spectroscopic; reverse side) |
| Targets & merit | evaluate_design, layer_sensitivity |
| Optimization | optimize_design — OpenFilters' refinement, needle and step methods |
| Temperature | thermal_sensitivity (how a peak moves per index and thickness change of each material; dλ/dT, kelvin per FWHM, athermal dn/dT), thermal_sweep (peak versus temperature) — tunable and athermal filters |
| Campaigns | run_batch (parameter sweeps), run_optimization_campaign (many starts → ranked → optional yield stage), tolerance_analysis (Monte Carlo yield with thickness and index errors), simulate_random_errors (OpenFilters' Preproduction: mean, standard deviation and worst case of the curves) |
| Jobs | job_status, get_results, list_jobs, cancel_job — results survive a server restart |
| Files | load_project, save_project (native .ofp) |
Example requests to Claude:
- *"Design a dichroic on BK7 with R > 99 % at 532 and 1064 nm and T > 90 % at 633 nm for 0–20°, at most 40 layers of TiO2/SiO2. Run 100 needle optimizations from random starts and rank the best 10 by yield at ±1 % thickness error."*
- *"Add my ALD Al2O3 from this ellipsometry file and sweep the AR coating thickness ±10 %."*
- *"Find thin-film HfO2 data on refractiveindex.info, import it and redo the mirror with it."*
- *"Where is the electric-field peak of this mirror at 1064 nm, and what monitoring signal should I expect at 633 nm at the end of each layer?"*
Ready-made workflows (prompts) appear as / commands in Claude Code and in the attachment menu of Claude Desktop: design an antireflection coating, a mirror, an edge filter or dichroic, a narrow band-pass filter, and review a design for manufacturing. The design-format guide, the material list and the OpenFilters example projects are available as resources (openfilters://guide, openfilters://materials, openfilters://examples/ ). Long optimizations and yield analyses report progress to apps that show it.
Installation
Requires Python ≥ 3.10. OpenFilters itself does not need to be installed: its calculation engine is built in (the OpenFilters GUI is only useful to open the .ofp files).
Claude Desktop extension (one click)
From the latest release, download mcp-for-openfilters- .mcpb and open it (or drag it onto Claude Desktop's Settings → Extensions). Claude Desktop runs it with uv, which fetches the server from PyPI.
Claude Code plugin
In Claude Code:
/plugin marketplace add BBrunoEsteves/mcp-for-openfilters
/plugin install mcp-for-openfilters@mcp-for-openfilters
The plugin runs the server with uvx (see claude-plugin/README.md for what it runs and downloads).
With uv (one command)
With uv installed, the server runs straight from PyPI, with the right package for your computer chosen automatically:
claude mcp add --scope user mcp-for-openfilters -- uvx mcp-for-openfilters
For Claude Desktop, add to claude_desktop_config.json (Settings → Developer → Edit config), then fully quit and reopen Claude Desktop:
{"mcpServers": {"mcp-for-openfilters": {"command": "uvx", "args": ["mcp-for-openfilters"]}}}
uvx keeps its own cached environment; uvx mcp-for-openfilters@latest picks up a new version.
With the installer
From the release page, download install_mcp_for_openfilters.py and the package for your computer (or all .whl files) into one folder, then:
python install_mcp_for_openfilters.py
It creates a private environment in ~/.mcp-for-openfilters, installs the package, registers the server in Claude Desktop (backing up its settings) and Claude Code, and runs a self-test. Then fully quit and reopen Claude Desktop. --uninstall removes it; --from-github downloads the packages with the GitHub CLI.
Packages are built for Windows (64-bit), Linux (x86-64) and macOS (Apple Silicon), Python 3.10–3.14, with the compiled fast core included: no compiler needed.
Manually
pip install mcp_for_openfilters-<version>-<python>-<platform>.whl
claude mcp add --scope user mcp-for-openfilters -- mcp-for-openfilters
For Claude Desktop, add to claude_desktop_config.json (Settings → Developer → Edit config):
{"mcpServers": {"mcp-for-openfilters": {"command": "<full path to mcp-for-openfilters>"}}}
Upgrading from openfilters-mcp (before 0.2.0)
The project was called *openfilters-mcp* until version 0.2.0. Fully quit Claude Desktop and Claude Code, then run the new installer: it removes the old openfilters registration and the old private environment (~/.openfilters-mcp) and registers mcp-for-openfilters. Your data folder ~/OpenFilters-MCP is kept and still used, and the old OPENFILTERS_MCP_* environment variables are still read. After a manual install, pip uninstall openfilters-mcp and replace the openfilters entry in your Claude settings.
From source (development)
git clone https://github.com/BBrunoEsteves/mcp-for-openfilters
cd mcp-for-openfilters python -m venv .venv .venv/Scripts/pip install -e ".[dev]" # .venv/bin/pip on macOS/Linux python dev/fetch_compiled.py # fast C++ core compiled by GitHub Actions (or build it locally)
Configuration
| Environment variable | Default | Meaning |
|---|---|---|
MCP_FOR_OPENFILTERS_HOME | ~/MCP-for-OpenFilters | data folder: materials/, jobs/, projects/, outputs/ |
MCP_FOR_OPENFILTERS_WORKERS | CPU count − 1 | parallel worker processes for jobs |
The names used before 0.2.0 (OPENFILTERS_MCP_HOME, OPENFILTERS_MCP_WORKERS) still work, and an existing ~/OpenFilters-MCP folder is used when ~/MCP-for-OpenFilters does not exist.
Conventions
- wavelengths and thicknesses in nm, angles in degrees, R/T/A as fractions (0–1);
- complex index N = n − ik (k ≥ 0 absorbs), as in OpenFilters and Macleod;
- layers are listed from the substrate outward;
- the merit function is OpenFilters' χ² = Σ ((target − value)/tolerance)², with satisfied inequality targets contributing zero.
A design:
{"substrate": "FusedSilica", "incident_medium": "void", "center_wavelength": 550,
"layers": [{"material": "TiO2", "thickness": 58.6}, {"material": "SiO2", "qwot": 1}]}
or with a stack formula: {"formula": {"formula": "(HL)^8 H", "materials": {"H": "TiO2", "L": "SiO2"}}}.
Materials given as n,k tables have no data outside their wavelength range. There the design field "table_extrapolation" decides: "hold" (default: n,k stay at the value at the nearest end of the data), "openfilters" (OpenFilters' own extrapolation, identical to its GUI) or "refuse". Every result computed outside the data says so, with the n,k used and what the other choice would give; optimizations, campaigns and yield analyses do not start until the choice is made (Claude asks you).
A target:
{"kind": "R", "from": 1000, "to": 1100, "step": 5, "value": 0.99, "tolerance": 0.005,
"inequality": ">=", "angle": 0, "polarization": "unpolarized"}
Validation
The test suite (pytest) checks the ported core against analytic results (quarter-wave stacks) and an independent transfer-matrix implementation (dispersive dielectrics, absorbing metals, 0–60°, s/p/unpolarized; agreement < 1e-9) and textbook closed forms (quarter-wave antireflection and absentee layers, V-coat zero, Brewster angle, quarter-wave stack peak reflectance and stop-band width), round-trips every example project through .ofp files, and runs the refinement and needle optimizations of the OpenFilters examples.
How the port was made
src/openfilters_core is generated from the original OpenFilters 1.1.1 sources by tools/port_from_py2.py, an auditable script (mechanical Python 2 → 3 conversions, a short list of targeted fixes, package-relative imports). The _abeles C++ extension uses the Python 3 C-API port by Emil Kleijn; _moremath is ported by the same script. See src/openfilters_core/PROVENANCE.md.
Privacy
Everything runs on your computer: no data is sent anywhere and there is no telemetry. The only network access is downloading public refractiveindex.info data when you ask for it. See PRIVACY.md.
Citing
If you use this in published work, please cite OpenFilters:
S. Larouche and L. Martinu, "OpenFilters: open-source software for the design, optimization, and
synthesis of optical filters," *Applied Optics* 47, C219–C230 (2008).
Contact
- Bug reports and feature requests: GitHub Issues (please include the ou