GitHits
Search public open-source code, documentation, metadata, vulnerabilities, changelogs, and examples.
Manage UniFi sites, devices, clients, networks, port forwarding, DNS, and firewall
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 10/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 22/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Go Unifi MCP 설치해 줘. https://mcp.popnx.com/i/claytono-go-unifi-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Go Unifi MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "go-unifi": { "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/claytono/go-unifi-mcp:v0.3.1" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Go Unifi MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"go-unifi": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/claytono/go-unifi-mcp:v0.3.1"
]
}
}
}Go Unifi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Go Unifi MCP을 쓰고 있다고 하거나 답에 Go Unifi MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Go Unifi MCP에 연결할 수 없어요
Go Unifi MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Go Unifi MCP에 연결되는 앱 쓰기
B · 사이버 보안에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Go Unifi MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user go-unifi -- docker run -i --rm ghcr.io/claytono/go-unifi-mcp:v0.3.1 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Go Unifi MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user go-unifi -- docker run -i --rm ghcr.io/claytono/go-unifi-mcp:v0.3.1Go Unifi MCP이 목록에 있고 연결됨으로 보이면 돼요
Go Unifi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Go Unifi MCP을 쓰고 있다고 하거나 답에 Go Unifi MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Go Unifi MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "go-unifi": { "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/claytono/go-unifi-mcp:v0.3.1" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Go Unifi MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Go Unifi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Go Unifi MCP을 쓰고 있다고 하거나 답에 Go Unifi MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Go Unifi MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "go-unifi": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/claytono/go-unifi-mcp:v0.3.1" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Go Unifi MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Go Unifi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Go Unifi MCP을 쓰고 있다고 하거나 답에 Go Unifi MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user go-unifi -- docker run -i --rm ghcr.io/claytono/go-unifi-mcp:v0.3.1Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"go-unifi": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/claytono/go-unifi-mcp:v0.3.1"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"go-unifi": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/claytono/go-unifi-mcp:v0.3.1"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"go-unifi": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/claytono/go-unifi-mcp:v0.3.1"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 claytono 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 3일 전
MPL-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/claytono-go-unifi-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 3일 전 변경됐고, 최신 버전(0.3.1)은 4개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
같은 카테고리에는: GitHits, Dependency Management MCP Server, Snyk MCP, TokenSafe, Draugr
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Search public open-source code, documentation, metadata, vulnerabilities, changelogs, and examples.
Sonatype component intelligence: versions, security analysis, and Trust Score recommendations
Easily find and fix security issues in your applications leveraging Snyk platform capabilities.
Your AI agent is smart enough to code all day. Local firewall & zero-loss runtime.
Security scanning for AI agents: SAST, SCA, secrets, IaC, DAST, ranked by real risk.
| 이 항목 Go Unifi MCP | GitHits | Dependency Management MCP Server | Snyk MCP | TokenSafe | Draugr | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드 또는 컴퓨터 설치 모두 가능 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 클라우드 또는 컴퓨터 설치 모두 가능 | 컴퓨터에 설치 필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 5/5 | 3/4 | 3/3 | 5/5 | 3/3 |
| 라이선스 | MPL-2.0 | Apache-2.0 | – | Apache-2.0 | MIT | Apache-2.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
A Model Context Protocol (MCP) server for UniFi Network Controller, written in Go.
go-unifi-mcp provides an MCP interface to UniFi Network Controller, enabling AI assistants and other MCP clients to interact with your UniFi infrastructure.
I couldn’t find an MCP server that supported both v1 and v2 firewall rules and IPv6, so I built one. This wraps the go-unifi library (which I trust from my Terraform provider experience) and leans on its generated API surface. The server is generated from the controller’s own API definitions, which makes it much easier to keep tool coverage up to date as UniFi evolves.
This project generates tools against the same UniFi Controller version pinned by go-unifi. When go-unifi updates its supported controller version, we regenerate our field definitions and tool metadata to match. We support the same controller range; see their controller support range.
Download pre-built binaries from the Releases page. Binaries are available for macOS and Linux (amd64/arm64).
# macOS (Apple Silicon)
curl -L https://github.com/claytono/go-unifi-mcp/releases/latest/download/go-unifi-mcp_darwin_arm64.tar.gz | tar xz sudo mv go-unifi-mcp /usr/local/bin/
curl -L https://github.com/claytono/go-unifi-mcp/releases/latest/download/go-unifi-mcp_darwin_amd64.tar.gz | tar xz sudo mv go-unifi-mcp /usr/local/bin/
curl -L https://github.com/claytono/go-unifi-mcp/releases/latest/download/go-unifi-mcp_linux_amd64.tar.gz | tar xz sudo mv go-unifi-mcp /usr/local/bin/
curl -L https://github.com/claytono/go-unifi-mcp/releases/latest/download/go-unifi-mcp_linux_arm64.tar.gz | tar xz sudo mv go-unifi-mcp /usr/local/bin/
Available from the claytono/homebrew-tap tap:
brew install claytono/tap/go-unifi-mcp
# Run without installing
nix run github:claytono/go-unifi-mcp
nix profile install github:claytono/go-unifi-mcp
Multi-architecture images (amd64/arm64) are published to GitHub Container Registry.
# Latest (pinned to most recent release, rebuilt on base image updates)
docker pull ghcr.io/claytono/go-unifi-mcp:latest
docker pull ghcr.io/claytono/go-unifi-mcp:edge
go install github.com/claytono/go-unifi-mcp/cmd/go-unifi-mcp@latest
The server requires access to a UniFi Network Controller. Two authentication methods are supported:
UNIFI_HOST and UNIFI_API_KEY.UNIFI_HOST, UNIFI_USERNAME, and UNIFI_PASSWORD.Add to your claude_desktop_config.json:
Using the binary:
{
"mcpServers": { "unifi": { "command": "/usr/local/bin/go-unifi-mcp", "env": { "UNIFI_HOST": "https://your-controller:443", "UNIFI_API_KEY": "your-api-key" } } } }
Using Docker:
{
"mcpServers": { "unifi": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "UNIFI_HOST", "-e", "UNIFI_API_KEY", "ghcr.io/claytono/go-unifi-mcp:latest" ], "env": { "UNIFI_HOST": "https://your-controller:443", "UNIFI_API_KEY": "your-api-key" } } } }
claude mcp add unifi -- go-unifi-mcp
Then set the required environment variables in your shell before running claude.
| Variable | Required | Default | Description |
|---|---|---|---|
UNIFI_HOST | Yes | — | UniFi controller URL |
UNIFI_API_KEY | \* | — | API key (preferred auth method) |
UNIFI_USERNAME | \* | — | Username for password auth |
UNIFI_PASSWORD | \* | — | Password for password auth |
UNIFI_SITE | No | default | UniFi site name |
UNIFI_VERIFY_SSL | No | true | Whether to verify SSL certs |
UNIFI_LOG_LEVEL | No | error | go-unifi client log level |
UNIFI_TOOL_MODE | No | lazy | Tool registration mode |
\* Either UNIFI_API_KEY or both UNIFI_USERNAME and UNIFI_PASSWORD must be set.
The UNIFI_LOG_LEVEL variable controls logging from the underlying go-unifi client library. The default is error because the client otherwise emits INFO messages to stderr, which can interfere with tools like mcp-cli that parse JSON on stdout/stderr.
| Level | Description |
|---|---|
disabled | No logging |
trace | Most verbose, including wire details |
debug | Debug messages |
info | Informational messages |
warn | Warnings only |
error | Errors only (default) |
The server supports two tool registration modes, following the pattern established by unifi-network-mcp:
| Mode | Tools | Context Size | Description |
|---|---|---|---|
lazy | 3 | ~200 tokens | Meta-tools only (default, recommended for LLMs) |
eager | 252 | ~55K tokens | All tools registered directly |
Lazy mode (default) registers only 3 meta-tools that provide access to 252 UniFi operations (generated from the controller API):
tool_index - Search/filter the tool catalog by category or resourceexecute - Execute any tool by name with argumentsbatch - Execute multiple tools in parallelThis dramatically reduces context window usage while preserving full functionality. The LLM first queries the index to find relevant tools, then executes them via the dispatcher.
Eager mode registers all 252 tools directly, which may be useful for non-LLM clients or debugging but consumes significant context.
Update semantics: Updates use a read-modify-write flow against the controller API. We fetch the current resource, merge your fields, and submit the full object. This avoids clearing unspecified fields, but it is not atomic and concurrent updates can race (last write wins) because the UniFi API does not expose etags or revision IDs. In practice this is unlikely to be an issue, but it's something to be aware of.
Responses from the UniFi API contain opaque ID references (e.g. network_id, usergroup_id, networkconf_id). By default, the server resolves these to human-readable names by looking up the referenced resource and injecting a sibling _name field:
{
"src_networkconf_id": "609fbf24e3ae433962e000de", "src_networkconf_name": "IOT" }
Resolution uses a per-request cache, so listing 100 firewall rules that reference networks only makes one additional ListNetwork API call. Typical overhead is 10-40ms depending on how many distinct resource types are referenced.
To disable resolution for a specific call, pass "resolve": false in the tool arguments.
All list operations support optional post-processing parameters for filtering and projecting results.
filter — Match items by field values. Supports three operators:
// Exact match
{"filter": {"type": "usw"}}
// Substring match (case-insensitive) {"filter": {"name": {"contains": "office"}}}
// Regular expression (RE2 syntax: https://github.com/google/re2/wiki/Syntax) {"filter": {"name": {"regex": "^ap-.*"}}}
// Multiple conditions (ANDed together) {"filter": {"type": "uap", "name": {"contains": "echo"}}}
search — Case-insensitive full-text search across all string field values:
{ "search": "living room" }
fields — Project the response to include only specific keys:
{ "fields": ["name", "ip", "mac"] }
Parameters can be combined. Execution order is filter → search → fields, so you can filter on fields that are excluded from the output:
{
"filter": { "type": "uap" }, "search": "echo", "fields": ["name", "ip"] }
# Clone the repository
git clone https://github.com/claytono/go-unifi-mcp.git cd go-unifi-mcp
nix develop
direnv allow
pre-commit install
task lint
task test
task coverage
task lint # Run linters via pre-commit
task test # Run tests task coverage # Run tests with coverage checks task build # Build the binary task generate # Run go generate
The development environment includes mcp-cli for interactive testing of the MCP server.
.envrc.local with your UniFi credentials (not tracked in git): export UNIFI_HOST="https://your-controller:443"
export UNIFI_API_KEY="your-api-key"
task build
The .mcp_servers.json config provides two server entries:
go-unifi-mcp - eager mode (252 tools)go-unifi-mcp-lazy - lazy mode (3 meta-tools)Eager mode (direct tool access):
# List tools (shows all 252)
mcp-cli info go-unifi-mcp
mcp-cli call go-unifi-mcp list_device '{}' mcp-cli call go-unifi-mcp list_network '{"site": "default"}'
Lazy mode (meta-tools):
# List tools (shows only 3 meta-tools)
mcp-cli info go-unifi-mcp-lazy
mcp-cli call go-unifi-mcp-lazy tool_index '{}' mcp-cli call go-unifi-mcp-lazy tool_index '{"category": "list"}' mcp-cli call go-unifi-mcp-lazy tool_index '{"resource": "network"}'
mcp-cli call go-unifi-mcp-lazy execute '{"tool": "list_device", "arguments": {}}'
mcp-cli call go-unifi-mcp-lazy batch '{"calls": [{"tool": "list_network", "arguments": {}}, {"tool": "list_device", "arguments": {}}]}'
This project builds upon:
MPL-2.0