Medplum MCP
Securely access and manage FHIR healthcare data stored in Medplum.
Finds slow pandas code, checks rewrites give identical results on your data, measures speedups.
제작자가 쓴 원문
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
pandas-doctor 설치해 줘. https://mcp.popnx.com/i/furqan-khan07-pandas-doctor.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 20일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server pandas-doctor을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "pandas-doctor": { "command": "uvx", "args": [ "pandas-doctor", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 pandas-doctor의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"pandas-doctor": {
"command": "uvx",
"args": [
"pandas-doctor",
"mcp"
]
}
}
}pandas-doctor을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 pandas-doctor을 쓰고 있다고 하거나 답에 pandas-doctor 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 pandas-doctor에 연결할 수 없어요
pandas-doctor는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · pandas-doctor에 연결되는 앱 쓰기
B · 클리닉 및 건강에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server pandas-doctor을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user pandas-doctor -- uvx pandas-doctor mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 pandas-doctor의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user pandas-doctor -- uvx pandas-doctor mcppandas-doctor이 목록에 있고 연결됨으로 보이면 돼요
pandas-doctor을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 pandas-doctor을 쓰고 있다고 하거나 답에 pandas-doctor 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server pandas-doctor을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "pandas-doctor": { "command": "uvx", "args": [ "pandas-doctor", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 pandas-doctor의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
pandas-doctor을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 pandas-doctor을 쓰고 있다고 하거나 답에 pandas-doctor 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server pandas-doctor을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "pandas-doctor": { "type": "stdio", "command": "uvx", "args": [ "pandas-doctor", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 pandas-doctor의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
pandas-doctor을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 pandas-doctor을 쓰고 있다고 하거나 답에 pandas-doctor 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user pandas-doctor -- uvx pandas-doctor mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"pandas-doctor": {
"command": "uvx",
"args": [
"pandas-doctor",
"mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"pandas-doctor": {
"command": "uvx",
"args": [
"pandas-doctor",
"mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"pandas-doctor": {
"type": "stdio",
"command": "uvx",
"args": [
"pandas-doctor",
"mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 furqan-khan07 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 어제
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 pandas-doctor@0.1.2 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/furqan-khan07-pandas-doctor)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(0.1.2)은 8일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: Medplum MCP, Mirobody, Codescene MCP Server, Marrow, WHOOP — MissingMCP
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Securely access and manage FHIR healthcare data stored in Medplum.
Lab results to LOINC codes and UCUM units, symptoms and diagnoses to ICPC-3. Offline, no API key.
An MCP server that provides CodeScene Code Health analysis tools.
Marrow Health: your Apple Health data over MCP, from the free iOS app. Reads, and writes on demand.
WHOOP recovery, strain, sleep and workouts in Claude via official WHOOP OAuth. Free, open source.
| 이 항목 pandas-doctor | Medplum MCP | Mirobody | Codescene MCP Server | Marrow | WHOOP — MissingMCP | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 컴퓨터에 설치 필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 3/3 | 2/3 | 3/3 | 2/4 |
| 라이선스 | MIT | Apache-2.0 | Apache-2.0 | NOASSERTION | MIT | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
pandas-doctor finds the slow pandas lines in your code, rewrites them, and checks on your own data that the result is exactly the same. Then it tells you how much faster the rewrite was, measured, not guessed.
That's a real run on real data: examples/taxi/features.py on January 2024 of the NYC TLC yellow taxi trips (2.96 million rows), with the kind of loops a lot of notebooks have. The script took 96.6 s (M4 Pro, pandas 3.1.0 with pyarrow). pandas-doctor checked 5 rewrites on the script's own data, all identical and faster. After --fix the whole script runs in 1.64 s and prints exactly the same output. Full report in docs/taxi-run-full.txt.
No download needed for examples/hero/features.py, the same script on 1M seeded synthetic trips: 27.9 s before, 1.01 s after (report).
pip install pandas-doctor
pandas-doctor run your_script.py
Or try it in your browser first, nothing to install:
run executes your script normally. Wherever it spots a slow pattern, it copies that code's inputs, lets your code run as usual, then runs the rewrite on the copies and compares the outputs. --diff shows the verified rewrites as a patch, and --fix writes them into the file.
In a notebook:
%load_ext pandas_doctor
%%doctor
for i, row in df.iterrows(): df.at[i, "total"] = row["price"] * row["qty"]
%%doctor --rewrite drops the verified version into a new cell below.
Two results count as identical only when they have:
numpy.float64 is not float)Every check ends in one of four verdicts:
| Verdict | What it means | Does run apply it? |
|---|---|---|
| identical | everything above matches | yes |
| equal values, different scalar types | every value is exactly equal, but some are numpy scalars where the original had Python ones, or the other way round. The report names the types. | yes, and the report says so. --strict-types turns this off. |
| equal within tolerance | floats differ by at most --rtol, usually from summing in a different order. The largest difference is shown. | only with --rtol |
| different | anything else, with the first place it differs | no |
That's stricter than it sounds, and it catches real differences:
iterrows hands you each row as a Series, so an int column turns into floats when the frame also has float columns. The obvious rewrite keeps the ints, and the dtype changes: *different*.row["x"] * 2 into a list gives numpy floats; the same thing via .tolist() gives Python floats: *equal values, different scalar types*. That rarely matters, but it can: json.dumps can't handle a numpy.int64.When the plain rewrite isn't accepted, pandas-doctor tries a few more faithful versions: the row dtype iterrows used, numpy scalars, the same summation order. It keeps the plainest one that's accepted, and between equally plain ones it prefers identical. If none is accepted, it tells you why and changes nothing.
A rewrite that is identical but not faster isn't recommended either. That happens: on python-backed strings, .str.lower() can be slower than .apply(lambda x: x.lower()).
"Verified" always means *on this data*. It's a strong check, not a proof for every possible input.
An assistant can suggest the same rewrites, but it can't tell you whether they give the same result on your data, and as the examples above show, they often don't. pandas-doctor runs both versions and compares them. If you do use an assistant, it can call pandas-doctor to check its own edits (see AI assistants).
| Command | What it does | Runs your code? |
|---|---|---|
pandas-doctor check PATH | Finds slow patterns in .py files and notebooks, prints suggested rewrites. Fast, for CI and pre-commit. | No |
pandas-doctor run script.py | Runs the script, checks each rewrite on its data, times both versions, and can apply the verified ones. | Yes, that's the point |
pandas-doctor verify | Bring your own rewrite: give it the original, the candidate and setup code that builds the inputs. | Only those snippets |
pandas-doctor verify --setup setup.py --original slow.py --candidate fast.py
verify exits 0 when the rewrite is identical or equal up to scalar types, unless you pass --strict-types; --accept-tolerance also lets *equal within tolerance* pass. With --format json (and run --json), the verdict is one of identical, scalar_types, within_tolerance or different, with the details next to it.
| Rule | Slow pattern | Rewrite | Measured, 100k rows | Result |
|---|---|---|---|---|
| PDD001 | for i, row in df.iterrows(): ... | column expression, .sum(), .extend(...) | 1.13 s → 79 µs (14,239x) | identical |
| PDD002 | df.apply(f, axis=1) with column maths | column expression or np.where | 192 ms → 92 µs (2,091x) | identical |
| PDD003 | X = pd.concat([X, part]) in a loop | collect parts, one pd.concat (unsafe fix) | 65.5 ms → 2.3 ms (29x) | identical |
| PDD004 | s.apply(lambda x: ...), .map(lambda ...) | .str / .dt / arithmetic | 27.8 ms → 403 µs (69x) | identical |
| PDD005 | groupby(...).apply(lambda g: g[c].count()) | groupby(...)[c].count() | 4.2 ms → 479 µs (8.8x) | identical |
| PDD006 | per-column astype loop (run only) | one astype call | 102 ms → 111 ms (1.1x slower) | identical |
| PDD007 | df.at[i, c] = ... in a loop over the index | whole-column assignment | 844 ms → 64 µs (13,283x) | identical |
| PDD008 | text columns with few distinct values (run only) | category | memory: 52.8 MB → 1.0 MB on 1M rows | suggestion only |
Measured with benchmarks/ on an Apple M4 Pro, Python 3.13.5, pandas 3.1.0, numpy 2.5.4 (full results for pandas 2.2.3 and with pyarrow are in benchmarks/results/). Each row is one example of the pattern; your speedup depends on your data and what the loop does.
Two results worth knowing:
.apply(lambda x: x.strip().lower()) → .str.strip().str.lower() was 5.6 ms → 8.7 ms (1.5x slower) without pyarrow, but 8.0 ms → 1.9 ms (4.2x) with pyarrow installed. pandas-doctor measures before recommending it.groupby.apply(lambda g: g[c].sum()) → groupby[c].sum() is 5.7 ms → 613 µs (9.3x), but pandas' built-in sum uses compensated summation, so the result matches only to within a relative 2.2e-16. pandas-doctor reports that and only applies it with --rtol.PDD006 and PDD008 need the data, so only run reports them. PDD006 shows up only when one astype call really is faster; on today's pandas releases it usually isn't.
Findings come at two levels:
check exits 1 when it finds one (--exit-zero to only report).iterrows loop that no vectorised rewrite matches, usually one that plots, prints or calls something for each row. All 99 iterrows findings in the corpus check below were like that. Info findings are listed (as notices in the GitHub Action) and never fail check.check --fix never changes behaviour on its own. The concat rewrite (PDD003) is identical only when every part has the same columns and dtypes; the property tests found frames where it isn't. So it's an unsafe fix that needs --unsafe-fixes, and run checks it on your data.
Before release, check was run over 8,419 files from 13 public repos (pandas, statsmodels, Kaggle courses, popular notebook collections) to hunt for false positives. The results and fixes are in docs/corpus.md. Slow lines it found in well-known teaching notebooks, re-measured, are in the speedup gallery.
Fixes found with pandas-doctor and merged into other projects:
| project | change | measured |
|---|---|---|
| pandapower | iterrows + per-row .loc in the different_voltage_levels_connected diagnostic replaced with one vectorised comparison | 2.28 s → 0.9 ms for that check on a 13,797-line grid (case9241pegase); a full pandapower.diagnostic(net) also runs power flows, so the whole call gets a few seconds faster, not thousands of times |
| pandapower | invalid_values diagnostic re-ran iterrows() once per checked column (up to 27 times per table); now builds the rows once per table | 1.77 s → 0.68 s for that check on case9241pegase; the full diagnostic went from 4.1 s to 3.1 s |
| datacompy | row-wise apply in the array-like column comparator replaced with a list comprehension | PandasCompare plus its report on 500k rows: 2.52 s → 0.72 s |
| fairlearn | row-wise apply in BoundedGroupLoss signed weights replaced with Series.map | ExponentiatedGradient fit on 100k rows: 15.1 s → 1.06 s |
pre-commit:
- repo: https://github.com/furqan-khan07/pandas-doctor
rev: v0.1.0 hooks:
GitHub Action. It annotates the diff and keeps one summary comment on the PR:
- uses: furqan-khan07/pandas-doctor@v0.1.0
with: paths: src notebooks
The comment needs permissions: pull-requests: write. check --format json works with anything else.
pandas-doctor mcp serves three tools over MCP: check_code, verify_rewrite and list_rules. Install it with pip install "pandas-doctor[mcp]", or let uvx fetch it. In Claude Code:
claude mcp add pandas-doctor -- uvx --from "pandas-doctor[mcp]" pandas-doctor mcp
In Cursor, Claude Desktop or any other client that takes an mcpServers config:
{
"mcpServers": { "pandas-doctor": { "command": "uvx", "args": ["--from", "pandas-doctor[mcp]", "pandas-doctor", "mcp"] } } }
It's also in the MCP Registry as io.github.furqan-khan07/pandas-doctor.
For Claude Code there's also a plugin with a skill that tells the assistant to verify before claiming a speedup (it uses the CLI through uvx, or the MCP server above if you added it):
/plugin marketplace add furqan-khan07/pandas-doctor
/plugin install pandas-doctor@pandas-doctor
run executes your script once, as python script.py would. Flagged blocks that are plain computation (no files, network or randomness) are re-run on copies to get a stable median. Slower blocks are timed once, during your run, and the report says so.