프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Bluetooth LE Health Sensors

제작자: K-Dense-AI버전 0.1.3i★ 32 (저장소 전체의 별)i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.K-Dense-AI/labmcp-ble-health

설치 방법

What it does

MCP server for Bluetooth LE health sensors (standard GATT profiles).

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 클리닉 및 건강

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성7/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수7/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Bluetooth LE Health Sensors 설치해 줘. https://mcp.popnx.com/i/k-dense-ai-labmcp-ble-health.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Bluetooth LE Health Sensors을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-ble-health": { "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bluetooth LE Health Sensors의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  3. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "labmcp-ble-health": {
          "command": "uvx",
          "args": [
            "labmcp-ble-health"
          ]
        }
      }
    }
  4. Claude를 끄고 다시 열기

  5. 해 보기

    Bluetooth LE Health Sensors을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Bluetooth LE Health Sensors을 쓰고 있다고 하거나 답에 Bluetooth LE Health Sensors 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Bluetooth LE Health Sensors에 연결할 수 없어요

Bluetooth LE Health Sensors는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Bluetooth LE Health Sensors에 연결되는 앱 쓰기

  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 클리닉 및 건강에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Bluetooth LE Health Sensors을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bluetooth LE Health Sensors의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health
  4. Claude Code에서 /mcp 입력

    Bluetooth LE Health Sensors이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Bluetooth LE Health Sensors을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Bluetooth LE Health Sensors을 쓰고 있다고 하거나 답에 Bluetooth LE Health Sensors 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Bluetooth LE Health Sensors을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-ble-health": { "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bluetooth LE Health Sensors의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Bluetooth LE Health Sensors을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Bluetooth LE Health Sensors을 쓰고 있다고 하거나 답에 Bluetooth LE Health Sensors 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Bluetooth LE Health Sensors을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "labmcp-ble-health": { "type": "stdio", "command": "uvx", "args": [ "labmcp-ble-health" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bluetooth LE Health Sensors의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Bluetooth LE Health Sensors을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Bluetooth LE Health Sensors을 쓰고 있다고 하거나 답에 Bluetooth LE Health Sensors 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Bluetooth LE Health Sensors을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user labmcp-ble-health -- uvx labmcp-ble-health

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-ble-health": {
      "command": "uvx",
      "args": [
        "labmcp-ble-health"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-ble-health": {
      "command": "uvx",
      "args": [
        "labmcp-ble-health"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-ble-health": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-ble-health"
      ]
    }
  }
}

직접 입력할 값

  • LABMCP_ADDRESS env
    계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
32 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
41/주
라이선스i
Apache-2.0
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.1.3
레지스트리 공개i
2026년 9월 27일
코드 마지막 변경i
2026년 9월 27일
제작자
K-Dense-AI
패키지
pypi: labmcp-ble-health
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 K-Dense-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 2개월 전

  • ✓ 통과

    라이선스 있음

    Apache-2.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 labmcp-ble-health@0.1.3 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-ble-health.svg)](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-ble-health)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

클리닉 및 건강 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1190개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1190개 중 36%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1190개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Bluetooth LE Health Sensors, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.1.3)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Medplum MCP, Codescene MCP Server, Marrow, WHOOP — MissingMCP, athletedata

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Medplum MCP

Securely access and manage FHIR healthcare data stored in Medplum.

제작자: medplum널리 사용됨★ 2.8천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · medplum.com

Marrow

Marrow Health: your Apple Health data over MCP, from the free iOS app. Reads, and writes on demand.

제작자: skeletonarmytech초기↓ 62/주★ 528일 전 업데이트

내 컴퓨터에서 실행✓ skeletonarmy.tech
비슷한 항목과 비교
이 항목
Bluetooth LE Health Sensors
Medplum MCPCodescene MCP ServerMarrowWHOOP — MissingMCPathletedata
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요컴퓨터에 설치 필요컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요예
기본 점검3/34/42/33/32/44/4
라이선스Apache-2.0Apache-2.0NOASSERTIONMITMITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Bluetooth LE Health Sensors — MCP Server

Let an AI agent read any Bluetooth Low Energy sensor that implements the standard Bluetooth SIG health profiles: record heart rate with RR intervals and HRV from a chest strap, read SpO2 and pulse rate from an oximeter, and capture blood pressure, body temperature and weight readings from monitors, thermometers and scales, in physiology labs, sports-science studies, sleep/HRV research and lab-operations settings.

[!WARNING]

Research and lab-operations use only. This is not a medical device. It is not intended for diagnosis, monitoring of patients, triage, or any clinical decision-making, and has not been validated or cleared by any regulator. Consumer sensors can be inaccurate; values pass through an AI agent that can misread them. Never use this server's output to make health decisions. Readings of people are personal data: follow your ethics approval and data-protection rules.

Packagelabmcp-ble-health
InstrumentsAny device implementing the Bluetooth SIG profiles: heart-rate straps/armbands (Heart Rate Service 0x180D), pulse oximeters (Pulse Oximeter Service 0x1822), blood pressure monitors (0x1810), thermometers (Health Thermometer 0x1809), weight scales (Weight Scale 0x181D), plus Battery (0x180F) and Device Information (0x180A)
InterfacesBluetooth Low Energy, via bleak (Linux/BlueZ, macOS/CoreBluetooth, Windows/WinRT)
ProtocolBluetooth SIG GATT: GATT Specification Supplement, HRS 1.0, PLXS 1.0.1, BLS 1.1.1, HTS 1.0, WSS 1.0.1; IEEE 11073-20601 SFLOAT/FLOAT per the PHD Transcoding White Paper v16
Status🧪 simulated: tested against a simulated BLE backend that emits byte-exact GATT packets, not yet verified on hardware. Report a hardware test

Try it without hardware

uvx labmcp-ble-health --simulate --check

The simulator provides six devices (addresses 00:00:5E:00:53:01–06, from the IANA documentation range): a combined "health kit" (default) exposing every service, and a separate HR strap, oximeter, BP monitor, thermometer and scale. Pick one with e.g. --simulate --address 00:00:5E:00:53:04.

Connect your device

  1. Check the device uses the standard profiles. Only devices that implement the Bluetooth SIG services above work. Many consumer wearables (most smartwatches, many fitness bands, several BP-monitor and scale brands) use proprietary protocols instead, and some only speak the standard profile in a "pairing"/"data transfer" mode. Chest straps that advertise the Heart Rate Service are the most reliable choice for HRV work.
  2. Free the device. A BLE sensor usually accepts one connection: close the vendor's phone app (or switch phone Bluetooth off) before connecting.
  3. Find the address: start the server without --address and ask the agent to run scan_devices, or run it with --check after putting the device in advertising mode (wear the strap; press the monitor's Bluetooth/start button). On Linux/Windows the address is the MAC (AA:BB:CC:DD:EE:FF); on macOS it is a CoreBluetooth UUID that is specific to your computer.
  4. Test the connection:
   uvx labmcp-ble-health --address AA:BB:CC:DD:EE:FF --check                       # Linux / Windows

uvx labmcp-ble-health --address 1A2B3C4D-1111-2222-3333-444455556666 --check # macOS

   Devices that require bonding (common for BP monitors and scales): add `--option pair=true` on Linux/Windows; macOS shows a system pairing prompt automatically. On Linux choose a non-default adapter with `--option adapter=hci1`; lengthen device discovery with `--option connect_timeout_s=40` (at most 60 s).

macOS: the terminal (or MCP client app) that launches the server needs Bluetooth permission (System Settings › Privacy & Security › Bluetooth). Without it macOS terminates the process as soon as Bluetooth is touched (exit code 134), before any error message can be printed.

Add to your MCP client

Claude Code

claude mcp add hr-strap -- uvx labmcp-ble-health --address AA:BB:CC:DD:EE:FF

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)

{

"mcpServers": { "hr-strap": { "command": "uvx", "args": ["labmcp-ble-health", "--address", "AA:BB:CC:DD:EE:FF"] } } }

Every tool is read-only (nothing on the device is changed, no control points are written), so --read-only makes no difference. Run one server entry per device if you use several sensors at once. For other clients, generate the snippet with uvx labmcp config ble-health --address AA:BB:CC:DD:EE:FF --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_device_info👁 readRead the device's identity (manufacturer, model, serial, firmware), the standard health services it exposes and its features.
read_battery👁 readRead the device's battery level (Battery Service, 0-100 %).
read_pulse_oximetry👁 readRead SpO2 (%) and pulse rate from a pulse oximeter, averaged over a few seconds or as a single spot-check reading.
read_temperature👁 readWait for a thermometer to send a temperature measurement and return it in °C.
read_weight👁 readWait for a scale to send a weight measurement (kg), with BMI and height if the scale sends them.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
record_heart_rate👁 readRecord heart rate for duration_s: bpm series, RR intervals and time-domain HRV (mean HR, SDNN, RMSSD, pNN50).
scan_devices👁 readScan for nearby Bluetooth LE devices: address, name, signal strength and advertised health services. Works without a configured --address.
wait_for_blood_pressure👁 readWait for a blood pressure monitor to send a measurement: systolic, diastolic and mean arterial pressure (mmHg) and pulse rate.

get_connection_info, get_command_log and reconnect are built into every LabMCP server.

Safety limits

LimitDefaultMeaning
max_record_duration_s600 sLongest heart-rate recording or continuous-oximetry averaging window an agent may start
max_wait_s300 sLongest time a tool may wait for a blood pressure, temperature, weight or spot-check reading

Override at launch: --limit max_record_duration_s=1800. Note that many MCP clients also enforce their own per-tool-call timeout; long recordings may need that raised too (e.g. MCP_TOOL_TIMEOUT in Claude Code).

Example prompts

  • "Record 5 minutes of heart rate from the chest strap and give me mean HR, SDNN and RMSSD, and save the raw RR intervals to ~/hrv/p07_baseline.csv."
  • "Scan for heart-rate straps nearby and tell me which one has the strongest signal."
  • "Wait for the blood pressure monitor: I'll start the cuff now. Report systolic/diastolic and whether the device flagged movement or an irregular pulse."
  • "Average SpO2 and pulse rate over 30 seconds from the oximeter and tell me how many samples were unusable."
  • "Read the scale when the participant steps on it and log weight and BMI with the device timestamp."
  • "What's the battery level of the strap before we start the session?"

Notes

  • Measurement devices push, they are not polled. Blood pressure monitors, thermometers, scales and spot-check oximeters only *indicate* a value when a measurement completes (these characteristics cannot be read). Call the tool first, then take the measurement. The tool keeps scanning and reconnecting until its timeout because many monitors only advertise right after measuring (for oximeters this needs mode="spot_check"; auto must connect first to find out which mode the device supports).
  • One measurement at a time. Starting a measurement cancels one that is still running on the same server (for example a recording whose tool call already timed out in the MCP client), and reconnect cancels it too; the cancelled call returns an error.
  • Malformed packets are skipped and logged (get_command_log) rather than discarding the whole recording; record_heart_rate and read_pulse_oximetry report how many in malformed_packets.
  • `save_path` (record_heart_rate) must be a new .csv file: ~ is expanded, missing folders are created, and an existing file is never overwritten. It is checked before recording starts.
  • Stored measurements. Monitors send unsent stored readings back-to-back, oldest first, when they connect. Tools keep listening 1.5 s after the first one and return the newest as the result, listing older ones in other_measurements; the device clock time is in device_timestamp (device local time, often wrong if the clock was never set).
  • Special values (IEEE 11073 NaN, NRes, ±INF) are never turned into numbers: they are reported as null with an explanation (special_values, unavailable_samples). Oximeters typically send NaN for the first seconds while acquiring.
  • Units: blood pressure in kPa is converted to mmHg (1 kPa = 7.500617 mmHg), °F to °C, lb to kg; unit_reported says what the device sent. Weight resolution is 0.005 kg / 0.01 lb per the Weight Scale spec; 0xFFFF means "measurement unsuccessful" and is returned as weight_kg: null. Energy expended is in kJ (HRS 1.0).
  • HRV is computed from the RR intervals the sensor sends (unit 1/1024 s): SDNN (sample SD), RMSSD, pNN50. RR intervals outside 0.3–2.0 s are excluded as artefacts; no further artefact correction or ectopic-beat editing is done. If a notification is lost over the air, the successive difference across that gap is not a true beat-to-beat difference. Optical wrist sensors often send no RR intervals at all. Use a validated ECG system for anything beyond exploratory research.
  • The Enhanced Blood Pressure Measurement, Record Access Control Point (downloading a monitor's whole memory), Current Time and User Data services are not implemented; nothing is ever written to the device.
  • Bluetooth pairing, bonding keys and OS permissions are handled by the operating system; the server never sees PINs.

Hardware verification

ModelFirmwareInterfaceVerified byDate
*none yet: be the first*