timesfm
TimesFM (Time Series Foundation Model) is a pretrained time-series foundation model developed by Google Research for time-series forecasting.
GDB/SWD MCP server over a smolmux broker: breakpoints, memory, Cortex-M fault decode, board probing.
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
TimesFM (Time Series Foundation Model) is a pretrained time-series foundation model developed by Google Research for time-series forecasting.
Open-source intelligence for the global theater. Track everything from the corporate/private jets of the wealthy, and spy satellites, to seismic events in one unified interface. Hook an AI agent up to have it parse through data and find previously unseen correlations. The knowledge is available to…
scrape data from Google Maps. Extracts data such as the name, address, phone number, website URL, rating, reviews number, latitude and longitude, reviews,email and more for each place
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
검사 3/3 통과 · 내 컴퓨터에서 실행돼요
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude는 아직 Smolmux Gdb MCP에 연결할 수 없어요
제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요
ChatGPT는 아직 Smolmux Gdb MCP에 연결할 수 없어요
제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요
Claude Code는 아직 Smolmux Gdb MCP에 연결할 수 없어요
제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요
Cursor는 아직 Smolmux Gdb MCP에 연결할 수 없어요
제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요
VS Code는 아직 Smolmux Gdb MCP에 연결할 수 없어요
제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 magnusmalm 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 28일 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/magnusmalm-smolmux-gdb-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 28일 전 변경됐고, 최신 버전(0.5.2)은 지난달 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요.
같은 카테고리에는: OpenSEO, Exa, Microsoft Learn MCP, Docs, COTAL actions (cotal.ai)
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Keyword research, site audits, rank tracking and AI visibility for your AI agent.
Connect AI agents to Exa for web search, content fetching, and multi-step research.
Official Microsoft Learn MCP Server – real-time, trusted docs & code samples for AI and LLMs.
Search and read Empryo's documentation. Read-only, no auth, no local access.
cotal.ai actions: product overview, site search, build log, feedback, Cloud waitlist, updates, calls
| 이 항목 Smolmux Gdb MCP | OpenSEO | Exa | Microsoft Learn MCP | Docs | COTAL actions (cotal.ai) | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 예 | 예 | 예 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 5/5 | 2/4 | 4/4 | 4/4 | 4/4 |
| 라이선스 | MIT | MIT | MIT | CC-BY-4.0 | NOASSERTION | Apache-2.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
A portable C11 device multiplexer. Holds a device connection open (serial UART, GDB stub) and multiplexes access to multiple clients over Unix sockets using newline-delimited JSON.
Single static binary, low latency, small footprint - built for daily serial and GDB bring-up on Linux.
New here? docs/START-HERE.md is a one-screen router - find your intent (run it, bring up a new board with an AI agent, understand the architecture, hack on the code) and it points you to the right doc.
One broker holds an ESP32-S3's UART. The monitor (top) watches it live. In the bottom pane a script sends temp and gets the reply on the same wire, resets the board and waits for its prompt, then esptool reads the flash ID through with-port: the broker suspends, esptool runs, the broker resumes, and the monitor never loses the port.
One broker holds SWD; smolmux-gdb-mcp runs `probe_unknown_board`. On a SAM C21 Xplained Pro that path decoded Cortex-M0+ from CPUID, named the part via SAM DSU DID, rejected a false STM32 match, and wrote a starter *.gdb-profile.json. Tools, register values, and profile shape: docs/demo-samc21-probe-transcript.md.
Day-to-day serial (multi-client, U-Boot break-in, flasher handoff): docs/daily-driver.md.
0600 under your private state directory, and smolmux refuses to write it through a symlink or to a file owned by another user)--auth-token, the broker generates a token into a 0600 file in $XDG_RUNTIME_DIR (or /tmp), so other local users and processes cannot connect; your own smolmux-monitor / smolmux-mcp read it automatically, and smolmux-cli token prints it. For remote use, keep the bind on loopback and reach it over an SSH tunnel or WireGuard rather than exposing the port; smolmux refuses to serve a non-loopback TCP bind with no --auth-token. --insecure-no-auth turns both protections off.smolmux-mcp / smolmux-gdb-mcp attach to a running broker; optional in-process --mcp sink for single-process stdiobootdelay=0 U-BootPrerequisites: Linux, a C11 compiler, CMake 3.21+, Python 3 with kconfiglib (the configure step generates the feature header with it). libpcre2-8 is optional; without it regex matching falls back to POSIX.
# Debian/Ubuntu
sudo apt install build-essential cmake python3 python3-pip libpcre2-dev pip install kconfiglib # or in a venv; Debian's system Python may need
cmake -B build && cmake --build build -j$(nproc)
./build/smolmux /dev/ttyUSB0
Connect a client:
# Needs a running broker (above). Auto-discovers the socket from the port name.
./build/smolmux-monitor /dev/ttyUSB0
Day-to-day workflows (profiles, logs, U-Boot break-in, multi-wire boards): docs/daily-driver.md. Intent router: docs/START-HERE.md.
cmake -B build && cmake --build build -j$(nproc) # Default (all features)
ctest --test-dir build # Run tests
cp configs/defconfig.minimal .config && cmake -B build # UART only, no sinks/watcher
cp configs/defconfig.uart .config && cmake -B build # UART + MCP sink + watcher cp configs/defconfig.embedded .config && cmake -B build # Embedded target profile cp configs/defconfig.full .config && cmake -B build # Everything (GDB, TCP, WS, MCP, watcher)
Or toggle features directly:
cmake -B build -DSM_ENABLE_GDB=OFF -DSM_ENABLE_SINK_WS=OFF
Developer benchmarks (e.g. the output coalescer harness) are off by default:
cmake -B build -DSM_BUILD_BENCH=ON && cmake --build build --target bench_coalesce
Interactive configuration:
cmake --build build --target menuconfig
cmake -B build -DSM_MUSL_STATIC=ON # Fully static musl binary (zero runtime deps)
cmake -B build -DSM_STATIC=ON # Static linking (except glibc)
smolmux <port> [options]
Options: -b, --baud Baud rate (default: 115200) -s, --socket Unix socket path -l, --log-dir I/O log directory (default: $XDG_STATE_HOME/smolmux or ~/.local/state/smolmux) -t, --text-log-dir Text log directory -p, --profile Device profile JSON file --board Group this wire under a board (for discovery) --role This wire's role on the board (console, swd, ...) --gdb Use GDB MI link instead of UART --gdb-path Path to gdb binary (default: gdb) --gdb-target GDB target (e.g., localhost:3333) --serial-tcp Connect to a serial-over-TCP device server (ser2net, socat, terminal server; telnet + RFC2217 baud/DTR/RTS/break control) --mcp Enable in-process MCP stdio sink (prefer standalone smolmux-mcp against a daemon broker for daily use) --tcp-port Enable TCP sink (default: 5555) --tcp-bind TCP bind address (default: 127.0.0.1) --auth-token Require token in hello from TCP clients (prefer env SMOLMUX_AUTH_TOKEN - hidden from ps) --auth-token-file Read the token from a file --insecure-no-auth Serve TCP/WS with no token. Without it, a loopback listener gets a generated token (0600 file; smolmux-cli token prints it) and a non-loopback --tcp-bind is refused. --ws-port Enable WebSocket sink (default: 5556) --no-text-log Disable text log --no-io-log Disable JSONL I/O log --no-reconnect Don't auto-reconnect on disconnect --wait-device Wait for the device path before open --gdb-allow-shell Permit GDB shell/python/eval (off by default) --list-ports List available serial ports and exit --list-profiles List available device profiles and exit --help-protocol Show wire protocol documentation -v, --verbose Enable debug logging -V, --version Show version -h, --help Show this help
Newline-delimited JSON over Unix sockets (also TCP/WS sinks). Binary data is base64-encoded. Message set covers session control, expect, history, anomaly, boot stages, autoboot flood, and autoresponder.
Full reference: ./build/smolmux --help-protocol (always matches this binary).
Client -> Broker: hello, send, send_expect, takeover, release, status, pin_control, set_baud, suspend, resume, history_request, incidents_request, configure_anomaly, interrupt_autoboot, configure_autoresponder, autoresponders_request
Broker -> Client: welcome, output, input_echo, expect_result, status_response, error, history_response, incidents_response, anomaly, autoboot_result, boot_stage, boot_stall, autoresponders_response, autoresponder_fired, suspended, resumed, link_down, link_up
Example session:
-> {"type":"hello","name":"my-tool","role":"controller","protocol_version":1}
<- {"type":"welcome","broker_version":"x.y.z","protocol_version":1,"port":"/dev/ttyUSB0","baud":115200,"your_role":"controller"} -> {"type":"send","id":"1","data":"dW5hbWUgLWEK"} <- {"type":"output","data":"TGludXggNC4xOS4w...","timestamp":1709654321.123}
┌───────────┐ ┌───────────┐
│ uart link │ │ gdb link │ <- device-facing, compiled in/out via Kconfig └─────┬─────┘ └─────┬─────┘ │ │ ▼ ▼ ┌──────────────────────────────┐ │ smolmux core │ <- epoll event loop, message bus, │ history · logging · anomaly │ role enforcement, expect engine └──┬───────┬───────┬───────┬───┘ │ │ │ │ ▼ ▼ ▼ ▼ ┌──────┐┌─────┐┌─────┐┌──────┐ │ unix ││ tcp ││ ws ││ mcp │ <- sinks, also compiled in/out │socket││sink ││sink ││ sink │ └──────┘└─────┘└─────┘└──────┘
See DESIGN.md for full architecture documentation.
Required: cJSON (vendored, single file)
Auto-detected: PCRE2 (libpcre2-8). Used as the regex engine when present, because it bounds backtracking internally; the build falls back to POSIX ERE automatically when it is absent, so it is never required. Force either way with -DSM_ENABLE_PCRE2=ON (error if missing) or -DSM_ENABLE_PCRE2=OFF.
Core has zero *required* external dependencies beyond POSIX + cJSON.
with-port suspends the port, runs an external tool like a flasher, then always resumes)-e, e.g. -e esc or -e ^A)serial_send_command, serial_read, serial_boot_status, serial_add_autoresponder, ...). Alternative: broker --mcp sink embeds MCP in-process.--gdb link - breakpoints, stepping, backtrace, name-labeled registers, memory, expression eval, fault-register decode (where the core has them), peripheral reads, gdb_interrupt, and unknown-board probing on ARM Cortex-M today (gdb_identify_target / gdb_generate_profile; other architectures are planned). Resources and prompts include smolmux-gdb://board-probing and probe_unknown_board. Built when