할 수 있는 일
Read-only Kubernetes diagnostics: pods, logs, events, workloads, services, PVCs and nodes.
제작자가 쓴 원문
- 연결 방식 내 컴퓨터에서 실행
- 계정 또는 키 키 필요 없음 · 설정 2개 입력 필요(KUBECONFIG, ALLOWED_NAMESPACES)
- 분류 개발자 도구
함께 쓰기
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
andrej-karpathy-skills
A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.
graphify
Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 7/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 7/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
검사 3/3 통과 · 내 컴퓨터에서 실행돼요
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
설정 2개 입력
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
KUBECONFIG컨테이너 내부 kubeconfig 파일의 경로입니다. 마운트 대상과 일치해야 합니다. /.kube/config로 대체되지 않으며 클러스터 내부 구성도 없습니다. 파일이 없거나 읽을 수 없거나 형식이 잘못되면 시작이 실패합니다.· 기본값 /kubeconfig영어 원문 보기
Path to the kubeconfig inside the container. Must match the mount destination. There is no fallback to ~/.kube/config and no in-cluster config: a missing, unreadable or malformed file is a startup fa…ALLOWED_NAMESPACES서버가 읽을 수 있는 네임스페이스를 쉼표로 구분하여 적습니다(예: staging,production). 와일드카드( 및 all)는 시작 시 거부되며, kube-system과 kube-public은 목록에 있어도 제외됩니다. 이는 심층 방어입니다.영어 원문 보기
Comma-separated namespaces the server may read, e.g. staging,production. Wildcards (* and all) are rejected at startup, and kube-system and kube-public are stripped even if listed. This is defense-in…
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
컴퓨터용 Claude 앱 설정 파일 열기
SettingsDeveloperEdit Config
이 설정을 붙여 넣고 저장
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
Claude를 끄고 다시 열기
해 보기
Kubernetes Troubleshoot을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Kubernetes Troubleshoot을 쓰고 있다고 하거나 답에 Kubernetes Troubleshoot 도구 이름이 나오면 연결된 거예요
추가 설정 3개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LOG_LEVELDEBUG, INFO, WARNING 또는 ERROR. 모든 로그는 stderr로 출력되며, stdout은 JSON-RPC 스트림 전용입니다.· 기본값 INFO영어 원문 보기
DEBUG, INFO, WARNING or ERROR. All logging goes to stderr; stdout carries the JSON-RPC stream exclusively.API_TIMEOUT_SECONDSKubernetes API 요청 타임아웃. 양의 정수여야 합니다.· 기본값 30영어 원문 보기
Kubernetes API request timeout. Must be a positive integer.MAX_LOG_LINES단일 get_pod_logs 호출이 반환할 수 있는 최대 로그 줄 수. 양의 정수여야 하며, 경고와 함께 하드 상한 1000으로 제한됩니다.· 기본값 200영어 원문 보기
Maximum log lines any single get_pod_logs call may return. Must be a positive integer; clamped to a hard ceiling of 1000 with a warning.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Kubernetes Troubleshoot에 연결할 수 없어요
Kubernetes Troubleshoot는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · Kubernetes Troubleshoot에 연결되는 앱 쓰기
- 설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
- 설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
- 설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
- 설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
B · 개발자 도구에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
설정 2개 입력
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
KUBECONFIG컨테이너 내부 kubeconfig 파일의 경로입니다. 마운트 대상과 일치해야 합니다. /.kube/config로 대체되지 않으며 클러스터 내부 구성도 없습니다. 파일이 없거나 읽을 수 없거나 형식이 잘못되면 시작이 실패합니다.· 기본값 /kubeconfig영어 원문 보기
Path to the kubeconfig inside the container. Must match the mount destination. There is no fallback to ~/.kube/config and no in-cluster config: a missing, unreadable or malformed file is a startup fa…ALLOWED_NAMESPACES서버가 읽을 수 있는 네임스페이스를 쉼표로 구분하여 적습니다(예: staging,production). 와일드카드( 및 all)는 시작 시 거부되며, kube-system과 kube-public은 목록에 있어도 제외됩니다. 이는 심층 방어입니다.영어 원문 보기
Comma-separated namespaces the server may read, e.g. staging,production. Wildcards (* and all) are rejected at startup, and kube-system and kube-public are stripped even if listed. This is defense-in…
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
터미널 열기
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
이 명령을 붙여 넣고 Enter
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
Claude Code에서 /mcp 입력
Kubernetes Troubleshoot이 목록에 있고 연결됨으로 보이면 돼요
해 보기
Kubernetes Troubleshoot을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Kubernetes Troubleshoot을 쓰고 있다고 하거나 답에 Kubernetes Troubleshoot 도구 이름이 나오면 연결된 거예요
추가 설정 3개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LOG_LEVELDEBUG, INFO, WARNING 또는 ERROR. 모든 로그는 stderr로 출력되며, stdout은 JSON-RPC 스트림 전용입니다.· 기본값 INFO영어 원문 보기
DEBUG, INFO, WARNING or ERROR. All logging goes to stderr; stdout carries the JSON-RPC stream exclusively.API_TIMEOUT_SECONDSKubernetes API 요청 타임아웃. 양의 정수여야 합니다.· 기본값 30영어 원문 보기
Kubernetes API request timeout. Must be a positive integer.MAX_LOG_LINES단일 get_pod_logs 호출이 반환할 수 있는 최대 로그 줄 수. 양의 정수여야 하며, 경고와 함께 하드 상한 1000으로 제한됩니다.· 기본값 200영어 원문 보기
Maximum log lines any single get_pod_logs call may return. Must be a positive integer; clamped to a hard ceiling of 1000 with a warning.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
설정 2개 입력
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
KUBECONFIG컨테이너 내부 kubeconfig 파일의 경로입니다. 마운트 대상과 일치해야 합니다. /.kube/config로 대체되지 않으며 클러스터 내부 구성도 없습니다. 파일이 없거나 읽을 수 없거나 형식이 잘못되면 시작이 실패합니다.· 기본값 /kubeconfig영어 원문 보기
Path to the kubeconfig inside the container. Must match the mount destination. There is no fallback to ~/.kube/config and no in-cluster config: a missing, unreadable or malformed file is a startup fa…ALLOWED_NAMESPACES서버가 읽을 수 있는 네임스페이스를 쉼표로 구분하여 적습니다(예: staging,production). 와일드카드( 및 all)는 시작 시 거부되며, kube-system과 kube-public은 목록에 있어도 제외됩니다. 이는 심층 방어입니다.영어 원문 보기
Comma-separated namespaces the server may read, e.g. staging,production. Wildcards (* and all) are rejected at startup, and kube-system and kube-public are stripped even if listed. This is defense-in…
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 버튼으로 Cursor 열기
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
키 입력
Kubernetes Troubleshoot 설정에서 KUBECONFIG, ALLOWED_NAMESPACES가 비어 있어요. 내 키를 넣고 저장하세요
Cursor에서 AI 채팅을 Agent 모드로 열기
해 보기
Kubernetes Troubleshoot을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Kubernetes Troubleshoot을 쓰고 있다고 하거나 답에 Kubernetes Troubleshoot 도구 이름이 나오면 연결된 거예요
추가 설정 3개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LOG_LEVELDEBUG, INFO, WARNING 또는 ERROR. 모든 로그는 stderr로 출력되며, stdout은 JSON-RPC 스트림 전용입니다.· 기본값 INFO영어 원문 보기
DEBUG, INFO, WARNING or ERROR. All logging goes to stderr; stdout carries the JSON-RPC stream exclusively.API_TIMEOUT_SECONDSKubernetes API 요청 타임아웃. 양의 정수여야 합니다.· 기본값 30영어 원문 보기
Kubernetes API request timeout. Must be a positive integer.MAX_LOG_LINES단일 get_pod_logs 호출이 반환할 수 있는 최대 로그 줄 수. 양의 정수여야 하며, 경고와 함께 하드 상한 1000으로 제한됩니다.· 기본값 200영어 원문 보기
Maximum log lines any single get_pod_logs call may return. Must be a positive integer; clamped to a hard ceiling of 1000 with a warning.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
설정 2개 입력 필요 (KUBECONFIG, ALLOWED_NAMESPACES) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
설정 2개 입력
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
KUBECONFIG컨테이너 내부 kubeconfig 파일의 경로입니다. 마운트 대상과 일치해야 합니다. /.kube/config로 대체되지 않으며 클러스터 내부 구성도 없습니다. 파일이 없거나 읽을 수 없거나 형식이 잘못되면 시작이 실패합니다.· 기본값 /kubeconfig영어 원문 보기
Path to the kubeconfig inside the container. Must match the mount destination. There is no fallback to ~/.kube/config and no in-cluster config: a missing, unreadable or malformed file is a startup fa…ALLOWED_NAMESPACES서버가 읽을 수 있는 네임스페이스를 쉼표로 구분하여 적습니다(예: staging,production). 와일드카드( 및 all)는 시작 시 거부되며, kube-system과 kube-public은 목록에 있어도 제외됩니다. 이는 심층 방어입니다.영어 원문 보기
Comma-separated namespaces the server may read, e.g. staging,production. Wildcards (* and all) are rejected at startup, and kube-system and kube-public are stripped even if listed. This is defense-in…
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 버튼으로 VS Code 열기
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
키 입력
Kubernetes Troubleshoot 설정에서 KUBECONFIG, ALLOWED_NAMESPACES가 비어 있어요. 내 키를 넣고 저장하세요
VS Code에서 AI 채팅을 Agent 모드로 열기
해 보기
Kubernetes Troubleshoot을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Kubernetes Troubleshoot을 쓰고 있다고 하거나 답에 Kubernetes Troubleshoot 도구 이름이 나오면 연결된 거예요
추가 설정 3개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LOG_LEVELDEBUG, INFO, WARNING 또는 ERROR. 모든 로그는 stderr로 출력되며, stdout은 JSON-RPC 스트림 전용입니다.· 기본값 INFO영어 원문 보기
DEBUG, INFO, WARNING or ERROR. All logging goes to stderr; stdout carries the JSON-RPC stream exclusively.API_TIMEOUT_SECONDSKubernetes API 요청 타임아웃. 양의 정수여야 합니다.· 기본값 30영어 원문 보기
Kubernetes API request timeout. Must be a positive integer.MAX_LOG_LINES단일 get_pod_logs 호출이 반환할 수 있는 최대 로그 줄 수. 양의 정수여야 하며, 경고와 함께 하드 상한 1000으로 제한됩니다.· 기본값 200영어 원문 보기
Maximum log lines any single get_pod_logs call may return. Must be a positive integer; clamped to a hard ceiling of 1000 with a warning.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
개발자용: 터미널 명령과 JSON 설정
컴퓨터에 설치
Claude Code
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
Claude Desktop (claude_desktop_config.json)
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
Cursor (~/.cursor/mcp.json)
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
VS Code (mcp.json)
명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요
직접 입력할 값
KUBECONFIG필수 env컨테이너 내부 kubeconfig 파일의 경로입니다. 마운트 대상과 일치해야 합니다. /.kube/config로 대체되지 않으며 클러스터 내부 구성도 없습니다. 파일이 없거나 읽을 수 없거나 형식이 잘못되면 시작이 실패합니다.영어 원문 보기
Path to the kubeconfig inside the container. Must match the mount destination. There is no fallback to ~/.kube/config and no in-cluster config: a missing, unreadable or malformed file is a startup fa…ALLOWED_NAMESPACES필수 env서버가 읽을 수 있는 네임스페이스를 쉼표로 구분하여 적습니다(예: staging,production). 와일드카드( 및 all)는 시작 시 거부되며, kube-system과 kube-public은 목록에 있어도 제외됩니다. 이는 심층 방어입니다.영어 원문 보기
Comma-separated namespaces the server may read, e.g. staging,production. Wildcards (* and all) are rejected at startup, and kube-system and kube-public are stripped even if listed. This is defense-in…LOG_LEVELenvDEBUG, INFO, WARNING 또는 ERROR. 모든 로그는 stderr로 출력되며, stdout은 JSON-RPC 스트림 전용입니다.영어 원문 보기
DEBUG, INFO, WARNING or ERROR. All logging goes to stderr; stdout carries the JSON-RPC stream exclusively.API_TIMEOUT_SECONDSenvKubernetes API 요청 타임아웃. 양의 정수여야 합니다.영어 원문 보기
Kubernetes API request timeout. Must be a positive integer.MAX_LOG_LINESenv단일 get_pod_logs 호출이 반환할 수 있는 최대 로그 줄 수. 양의 정수여야 하며, 경고와 함께 하드 상한 1000으로 제한됩니다.영어 원문 보기
Maximum log lines any single get_pod_logs call may return. Must be a positive integer; clamped to a hard ceiling of 1000 with a warning.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
한눈에 보기
- 주간 다운로드i
- npm/PyPI에 없음
- 연결 방식
- 내 컴퓨터에서 실행
- 최신 버전i
- 1.0.0
- 레지스트리 공개i
- 2026년 8월 25일
- 코드 마지막 변경i
- 2026년 8월 25일
- 제작자
- NanaGyamfiPrempeh30
- 패키지
oci: docker.io/yawgyamfiprem32/k8s-troubleshoot-mcp:1.0.0- 웹사이트
- github.com
- 레지스트리 상태
- 활성
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 NanaGyamfiPrempeh30 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 3개월 전
- ✓ 통과
라이선스 있음
MIT 사용
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/nanagyamfiprempeh30-k8s-troubleshoot-mcp)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
개발자 도구 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 6202개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 6202개 중 28%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 6202개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
Kubernetes Troubleshoot, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 3개월 전 변경됐고, 최신 버전(1.0.0)은 3개월 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| 이 항목 Kubernetes Troubleshoot | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| 라이선스 | MIT | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
k8s-troubleshoot-mcp
A read-only MCP (Model Context Protocol) server that lets an AI assistant diagnose a Kubernetes cluster. Ask why a pod is crash-looping instead of running six kubectl commands and correlating the output by hand.
Read-only is a structural property, not a promise. There are no write tools, and the RBAC manifests grant no write verbs. See Security model.
What It Does
The server exposes 16 diagnostic tools over stdio. Connect it to Claude Desktop, VS Code, or Kiro, and you can ask things like:
- "Why is the
checkoutpod instagingnot ready?" - "Show me the last 50 lines of logs from the
apicontainer" - "Which nodes are not Ready, and what are their taints?"
- "Is the
webHPA scaling, and what does its current metric say?" - "What events fired in
productionin the last few minutes?"
The assistant calls the tools, the server queries the Kubernetes API with a scoped ServiceAccount token, and every response comes back as a structured dict — including errors, which are never raised as exceptions into the MCP layer.
Architecture
┌──────────────────┐ stdio (JSON-RPC) ┌──────────────────────────┐
│ MCP Client │◄─────────────────────►│ MCP Server │ │ Claude Desktop │ │ (this project) │ │ VS Code / Kiro │ │ │ └──────────────────┘ │ config.py ─ validate │ │ server.py ─ 16 tools │ │ tools/*.py ─ read+shape│ │ response.py ─ escape + │ │ structure │ └───────────┬──────────────┘ │ HTTPS, explicit │ KUBECONFIG only ┌───────────▼──────────────┐ │ Kubernetes API server │ │ ── RBAC boundary ── │ │ ServiceAccount: │ │ get/list/watch only │ └──────────────────────────┘
Configuration is validated once at startup. If anything is wrong — KUBECONFIG unset, the file unreadable or malformed, ALLOWED_NAMESPACES missing or containing a wildcard — the process writes one line to stderr and exits 1. It never starts in a partially-valid state.
Available Tools
Arguments marked ? are optional.
| Tool | Description | Parameters |
|---|---|---|
get_pod_status | Phase, conditions, container statuses, QoS class and node for a pod | pod_name, namespace |
get_pod_logs | Recent log lines from a pod container. Content is untrusted — see Reading get_pod_logs output | pod_name, namespace, container?, previous?, tail_lines? |
get_pod_events | Recent events for a pod, newest first, with total_available | pod_name, namespace |
list_pods | Pods in a namespace with phase, restart count and readiness | namespace, label_selector? |
get_node_status | Conditions, capacity, allocatable, taints and roles for a node | node_name |
list_nodes | Cluster nodes with readiness, roles, age and kubelet version | none |
get_deployment_status | Replica counts, conditions and rollout strategy | deployment_name, namespace |
list_deployments | Deployments in a namespace with replica counts and availability | namespace |
get_statefulset_status | Replica counts, revisions and update strategy | statefulset_name, namespace |
get_daemonset_status | Scheduling counts and update strategy | daemonset_name, namespace |
get_service | Type, ClusterIP, ports, selector and ready endpoint count | service_name, namespace |
get_endpoints | Ready and not-ready endpoint addresses backing a service | service_name, namespace |
get_pvc_status | Phase, capacity, binding and resize state for a PVC | pvc_name, namespace |
get_hpa_status | Replica bounds, current metrics and conditions for an HPA | hpa_name, namespace |
get_namespace_events | Recent events across a namespace, newest first, with total_available | namespace, limit? |
list_namespaces | The namespaces this server is permitted to read | none |
Every namespaced tool validates its namespace argument before making any API call, so a disallowed namespace produces a structured error and no network request.
Deliberately absent
No get_secrets, get_configmap, exec_into_pod, port_forward, or any create/update/patch/delete tool. These are excluded from all versions unless a new threat-model review is conducted and documented — they are not backlog items. The reasoning for each is in SECURITY.md.
Security model
Full detail is in SECURITY.md. The summary:
The boundary is Kubernetes RBAC
Everything this server does in application code is defense-in-depth. The enforcement boundary is the ServiceAccount's RBAC bindings. If the bindings grant more than intended, the application-layer allowlist is all that stands in the way, and it is not a boundary you should rely on.
Provisioning is split by scope so that the cluster-scoped grant is minimal:
| Manifest | Scope | Grants |
|---|---|---|
clusterrole.yaml + clusterrolebinding.yaml | cluster | get/list/watch on nodes and namespaces only |
role.yaml | namespace | get/list/watch on the diagnostic resources |
rolebinding.yaml.template | namespace | binds the Role, one namespace at a time |
Applying the cluster-scoped pair makes no namespace readable. A namespace becomes readable only when a Role *and* a RoleBinding exist in it. A namespace listed in ALLOWED_NAMESPACES but never bound stays unreadable — RBAC wins.
pods/log is granted in its own rule block, never folded into the pods rule, because Kubernetes subresources do not inherit from their parent.
Defense-in-depth layers
| Layer | What it does | What it is not |
|---|---|---|
| RBAC | Grants read verbs on diagnostic resources in bound namespaces only | — this *is* the boundary |
| Explicit kubeconfig | Reads KUBECONFIG from an exact path; no ~/.kube/config, no in-cluster config, no fallback chain | Not a permission check — it prevents silently picking up an ambient credential |
| Namespace allowlist | Rejects wildcards, strips kube-system/kube-public, validates before every call | Advisory; a bug here is contained by RBAC |
| Output escaping | All cluster-authored free text routed through serialize_log_content | Prevents breaking out of a JSON string; cannot stop a model acting on legible instructions |
| Structured errors | Every failure returns a dict; no exception reaches the MCP layer | — |
Prompt injection is mitigated, not eliminated
Pod logs and event messages are written by workloads in the cluster. A container can print anything, including text shaped like instructions to the model reading it. Escaping keeps injected text inside its JSON string; it cannot stop a model from acting on instructions it reads as data. Treat tool output as untrusted input to whatever consumes it. This residual risk is accepted and documented.
Prerequisites
- A Kubernetes cluster and a
kubectlcontext with enough permission to create a ServiceAccount, Role, RoleBinding, ClusterRole and ClusterRoleBinding — you need this once, to provision. The server itself never uses your admin credential. - Kubernetes 1.24+ —
scripts/generate-kubeconfig.shmints a token via the TokenRequest API, not a legacy auto-mounted Secret. - Python 3.11+
- uv —
curl -LsSf https://astral.sh/uv/install.sh | sh(or use Docker, which needs neither Python nor uv on the host)
Setup
git clone https://github.com/NanaGyamfiPrempeh30/k8s-troubleshoot-mcp.git
cd k8s-troubleshoot-mcp
Install dependencies (uv creates .venv automatically)
uv sync
Run the test suite
uv run pytest tests/ -q
Provision RBAC and mint a kubeconfig
scripts/generate-kubeconfig.sh /secure/path/k8s-mcp-kubeconfig.yaml staging production
The first argument is where to write the kubeconfig; the rest are the namespaces the server may read. Pass the same set you intend to put in ALLOWED_NAMESPACES — RBAC is the enforcement boundary, and a namespace bound here but absent from the allowlist (or the reverse) is a mismatch between real permission and configured capability.
The script applies the cluster-scoped manifests together, then applies role.yaml with an explicit -n and renders a RoleBinding per namespace. On success it prints the kubeconfig path to stdout and nothing else; all diagnostics go to stderr. It also asserts after provisioning that kubectl auth can-i get secrets returns no, and aborts if it does not.
Do not run `kubectl apply -f kubernetes/`. It does not fail — it reports
success while creating
role.yamlin the *current* namespace and skipping
rolebinding.yaml.templateentirely, becausekubectl apply -fonly
reads
.yaml/.yml/.json. The result is a server that looks provisioned
and can read nothing. Verified against a v1.35 API server with
--dry-run=server: 5 resources applied, not 6.
The generated kubeconfig is written with umask 077 and chmod 600. Keep it out of the repository — the script warns if the output path is inside a repository and not covered by .gitignore.
Run it
KUBECONFIG=/secure/path/k8s-mcp-kubeconfig.yaml \
ALLOWED_NAMESPACES=staging,production \ uv run k8s-troubleshoot-mcp
The server speaks JSON-RPC on stdin/stdout, so it will appear to hang — that is correct. It is waiting for a client.
Connecting to Claude Desktop
Add to claude_desktop_config.json (%APPDATA%\Claude\claude_desktop_config.json on Windows, ~/Library/Application Support/Claude/claude_desktop_config.json on macOS):
{
"mcpServers": { "k8s-troubleshoot": { "command": "uv", "args": ["run", "k8s-troubleshoot-mcp"], "cwd": "/path/to/k8s-troubleshoot-mcp", "env": { "KUBECONFIG": "/secure/path/k8s-mcp-kubeconfig.yaml", "ALLOWED_NAMESPACES": "staging,production" } } } }
Restart Claude Desktop fully (quit from the system tray, reopen), then check Settings → Developer → k8s-troubleshoot shows running.
On Windows, if the server shows as disconnected, use a batch file wrapper — Claude Desktop has working-directory issues with direct interpreter invocation:
@echo off
cd /d C:\Users\YourUsername\k8s-troubleshoot-mcp uv run k8s-troubleshoot-mcp
{
"mcpServers": { "k8s-troubleshoot": { "command": "cmd.exe", "args": ["/c", "C:\\Users\\YourUsername\\k8s-troubleshoot-mcp\\run_mcp.bat"], "env": { "KUBECONFIG": "C:\\secure\\path\\k8s-mcp-kubeconfig.yaml", "ALLOWED_NAMESPACES": "staging,production" } } } }
Running with Docker
docker build -t k8s-troubleshoot-mcp .
docker run -i --rm \ -v /secure/path/k8s-mcp-kubeconfig.yaml:/kubeconfig:ro \ -e KUBECONFIG=/kubeconfig \ -e ALLOWED_NAMESPACES=staging,production \ k8s-troubleshoot-mcp
-i is required — JSON-RPC travels on stdin/stdout. :ro is not decoration: this server performs no writes of any kind, so a writable mount would grant privilege it has no use for.
The image runs as non-root, UID 10001, and contains no c