DexSQL
SQL for Android APK and DEX files: classes, methods, strings, references and smali.
Query an EVM contract's indexed history with SQL, via a local nuthatch nest and nuthatch dev.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 11/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 23/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
nuthatch 설치해 줘. https://mcp.popnx.com/i/nuthatch-org-nuthatch.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 18일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"nuthatch": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/nuthatch-org/nuthatch:5.22.0",
"mcp",
"--url",
"http://host.docker.internal:8288"
]
}
}
}nuthatch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 nuthatch을 쓰고 있다고 하거나 답에 nuthatch 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 nuthatch에 연결할 수 없어요
nuthatch는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · nuthatch에 연결되는 앱 쓰기
B · 암호화폐 및 블록체인에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user nuthatch -- docker run -i --rm ghcr.io/nuthatch-org/nuthatch:5.22.0 mcp --url http://host.docker.internal:8288nuthatch이 목록에 있고 연결됨으로 보이면 돼요
nuthatch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 nuthatch을 쓰고 있다고 하거나 답에 nuthatch 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
nuthatch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 nuthatch을 쓰고 있다고 하거나 답에 nuthatch 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
nuthatch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 nuthatch을 쓰고 있다고 하거나 답에 nuthatch 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user nuthatch -- docker run -i --rm ghcr.io/nuthatch-org/nuthatch:5.22.0 mcp --url http://host.docker.internal:8288Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"nuthatch": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/nuthatch-org/nuthatch:5.22.0",
"mcp",
"--url",
"http://host.docker.internal:8288"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"nuthatch": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/nuthatch-org/nuthatch:5.22.0",
"mcp",
"--url",
"http://host.docker.internal:8288"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"nuthatch": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/nuthatch-org/nuthatch:5.22.0",
"mcp",
"--url",
"http://host.docker.internal:8288"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 nuthatch-org 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 어제
Apache-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/nuthatch-org-nuthatch)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(5.22.0)은 그저께 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
같은 카테고리에는: DexSQL, PayRam, DexPaprika, Alchemy MCP Server, X402 List MCP
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
SQL for Android APK and DEX files: classes, methods, strings, references and smali.
Install, configure, operate and integrate self-hosted PayRam crypto payment gateways.
DEX and on-chain data: liquidity pools, token prices, swaps, and trading volume.
Blockchain data across 100+ chains: token prices, NFTs, transfers, simulation, traces, Solana DAS
Find and vet x402 payment APIs before your agent pays one: uptime, price, on-chain volume.
| 이 항목 nuthatch | DexSQL | PayRam | DexPaprika | Alchemy MCP Server | X402 List MCP | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 2/3 | 3/4 | 4/4 | 4/4 | 5/5 |
| 라이선스 | Apache-2.0 | NOASSERTION | – | MIT | MIT | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Turn an EVM contract's history into a local SQL database. One Rust binary, no Postgres, no
subgraph to write, and an MCP server built in.
· Website: www.nuthatch-indexer.com
For AI coding agents: AGENTS.md is install, init, a headless dev, query and MCP setup for every common client, as commands to paste.
Also: self-hosted Etherscan-compatible history for the chains that lost their free tier. Base and BNB Chain, plus Gnosis, on your own RPC (Base and BNB Chain need an archive node with tracing): examples/paywalled-chains.
curl -fsSL https://nuthatch-indexer.com/install.sh | sh
export PATH="$HOME/.local/bin:$PATH" mkdir weth-nest && cd weth-nest nuthatch init 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2 --alias weth nuthatch dev --backfill 300
Then, in a second terminal:
nuthatch sql "SELECT count(*) FROM weth__transfer"
The installer covers macOS Apple Silicon and Linux x86_64 and aarch64, and the export adds its directory, which a fresh macOS shell lacks. init indexes WETH and detects its chain. The block carries no # comments because zsh, the macOS default, does not treat a pasted # as one: it passes the rest of the line on as arguments.
The Linux binary needs glibc 2.35 or newer to run from 4.1.0, which is also what it is built on; 4.0.x ran on 2.34; older systems and Alpine have a static x86_64 build. On other platforms, build from source with Rust 1.95.0 (docs/install.md).
mkdir weth-nest is where the nest goes. init writes nuthatch.toml, abis/ and the rest into the current directory, and an empty one keeps a home directory clear of them. init creates a nest: the directory, holding the contract's ABI, its config and, once dev runs, its indexed data. --backfill 300 starts 300 blocks behind the tip, about an hour of mainnet, so there are rows to query within seconds on the bundled public endpoints. Without it, dev backfills from the contract's deployment block: for WETH that is 21 million blocks, a long backfill on free public endpoints and a job for your own RPC (--rpc).
That quickstart, run as written on the 4.10.1 release on 2026-10-05, took 13 s from the curl to a non-zero count in a clean macOS shell on an M5 Pro, and 21 s in a fresh ubuntu:24.04 container (docs/readme-check-2026-10-05.md, which records every command in this file). The mkdir line is newer than that timing.
The endpoints a new nest is given are for this try-out. On the bundled mainnet pair, nuthatch doctor reports eth_getLogs windows of 160 blocks (Tenderly) and 80 (mevblocker), and both are rate-limited. A 300-block window of USDC went over Tenderly's 20,000-log cap, so the same --backfill 300 that finishes for WETH can stall on a busier contract.
Use your own node or a paid endpoint. --rpc replaces the bundled pool. The first command below keeps the recent window. The second backfills from the deployment block:
nuthatch dev --backfill 300 --rpc https://your-endpoint.example
nuthatch dev --rpc https://your-endpoint.example
The same URL can live in nuthatch.toml as rpc_urls instead of --rpc. More, including how to probe an endpoint first, is under Bring your own RPC endpoint.
| Needs a subgraph | Needs handler code | Data comes from | What you run | Query with | |
|---|---|---|---|---|---|
| The Graph | yes | yes (AssemblyScript) | indexers on the network | nothing, or graph-node + Postgres + IPFS | GraphQL |
| Ponder | no | yes (TypeScript) | your RPC endpoint | Node.js, plus Postgres in production | SQL, GraphQL |
| nuthatch | no | no: tables come from the ABI | your RPC endpoint | one binary | SQL, HTTP, MCP |
Like Ponder, nuthatch reads the chain over JSON-RPC, so it needs an endpoint, and a provider may charge for one. The public endpoints it bundles are for trying it out, not for keeping it running. It complements The Graph rather than replacing it: a subgraph serves an application from a network of indexers, while a nest puts a contract's history in a database on your own machine.
Why. Getting at a contract's history usually means writing a subgraph or handler code, running a database, or renting someone else's copy. nuthatch generates the tables from the ABI, runs as one process with nothing else to install, and keeps the data on your machine: at most 2 GB of RAM per chain, no telemetry unless you opt in, no account. The built-in MCP server lets Claude or any MCP client query it.
init 0xAddr resolves the ABI (Sourcify, then Etherscan), generates the schema and decoders, and scaffolds the project. You write nothing.init (nuthatch count), and its totals are public. Most people say no or are never asked, so they are floors.An earlier example, now finished: [Arcaidia](https://arcaidia.io), a speed layer over Circle's CCTP built at ETHOnline 2026, read its indexed state from two nests on Ethereum Sepolia and Arc Testnet: its solver discovered intents there, its settlement agent tracked CCTP there, and its web console rendered from them. The nests were stopped on 2026-09-29.
More at nuthatch-indexer.com/stories.
There is no hosted platform. We will run a nest for you on the stock binary, with no billing and no accounts: ask on the Discord.
curl -fsSL https://nuthatch-indexer.com/install.sh | sh
That downloads the prebuilt binary for your platform from the latest release, verifies its SHA-256, and installs it to ~/.local/bin (override with NUTHATCH_INSTALL_DIR). No compiler is involved. A stock macOS shell does not have ~/.local/bin on its PATH, which is why the quickstart above exports it; add the same line to ~/.zshrc (or ~/.bashrc) to keep it for new terminals. Prebuilt binaries cover macOS on Apple Silicon and Intel and Linux x86_64 and aarch64 (aarch64 from the release after 4.11.0, Intel Mac from the release after 5.16.0) and are attached to every release with their checksums, if you would rather fetch one by hand. The Intel Mac binary is the default build only and has not yet been run on Intel hardware.
The Linux binary is dynamically linked and needs one thing, measured off the published artifact with objdump -T rather than inferred:
GLIBC_2.34, so 2.34 was what you needed to run it and 2.35 only what we compiled it on (#978); 4.1.0 references hypot at GLIBC_2.35, where libm re-versioned it, so the two numbers now agree.It links libc, libm and libgcc and no C++ runtime. Releases before 4.1 embedded DuckDB and also needed libstdc++ from GCC 11.
Debian 12 and Ubuntu 22.04 clear it. RHEL 9 and Amazon Linux 2023 ship glibc 2.34 and ran 4.0.x; from 4.1.0 they need the source build, or nuthatch-x86_64-unknown-linux-musl.tar.gz, a static build with no glibc floor (from the release after 5.16.0; it uses musl's allocator, not jemalloc, so its behaviour under load is unmeasured).
Verify who built it. Every release binary carries a build provenance attestation, which a checksum cannot give you:
gh attestation verify nuthatch-x86_64-unknown-linux-gnu.tar.gz --repo nuthatch-org/nuthatch \
--signer-workflow nuthatch-org/nuthatch/.github/workflows/release.yml --source-ref refs/tags/v
From source, which is the only route on a platform we do not publish a binary for:
rustup toolchain install 1.95.0
cargo +1.95.0 install --git https://github.com/nuthatch-org/nuthatch nuthatch
The +1.95.0 is required: cargo install --git ignores the repo's toolchain pin, and a newer default toolchain fails to compile a dependency.
Container images are published per release to ghcr.io/nuthatch-org/nuthatch - : for embedded, : -scaled for the scaled build. The image ships the *same binary attached to the release*, so the two cannot drift.
docs/install.md has the detail behind each of these: how the ABI floor is measured, what the attestation proves and what --repo is for, and why the toolchain pin exists.
Chains. Ethereum, Arbitrum One, Base, BSC, Polygon, Gnosis, Optimism, Monad and Robinhood Chain are *built in*, with measured public endpoints and tuned finality settings - omit `--chain` and nuthatch probes each for your contract's bytecode and picks the one it lives on. Point at your own node with --rpc.
Any other EVM chain works too - World Chain, Base Sepolia, your own devnet. Name the chain and say where it lives:
nuthatch init 0xADDR --chain world-chain --rpc https://your-endpoint.example
The chain id is read from the endpoint itself, so there is nothing to look up or type wrong. On one of the nine built-in names --rpc is not consulted for the chain id, but it is the pool: your endpoints replace the bundled public ones outright. Omit --rpc on an unregistered name and the refusal tells you the remedy.
See running an unlisted EVM chain for the finality caveat, which is the part worth reading: a chain whose finalized tag runs close to the tip needs a depth-based policy instead, or you seal immutable Parquet that could never be corrected.
nuthatch assumes a paid RPC endpoint, or your own node, for anything you intend to keep running. That is the golden path.
Worth knowing, since we are being precise about it: most figures currently in docs/benchmarks.md were measured against *public* endpoints, and that is a known weakness of those numbers rather than a recommendation - a benchmark taken through a rate-limited endpoint measures the endpoint. On one workload the network was 99.3% of backfill wall clock (the same tape live against a public endpoint and replayed from disk, 2026-08-23, in docs/benchmarks.md), which is why the replay rig (RFC-0039) exists and why those figures carry that caveat on the page itself.
The free public endpoints bundled per chain exist for one job: so init → dev works with zero setup. Treat them as testing and initial validation. Why they are not fine for rea