프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요 로그인

3CX MCP

제작자: servosity버전 0.1.5i★ 84 (저장소 전체의 별)i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.Servosity/threecx-mcp

설치 방법

할 수 있는 일

3CX for MSPs: trunk, licence, version and backup health across every client phone system.

제작자가 쓴 원문

  • 연결 방식 내 컴퓨터에서 실행
  • 계정 또는 키 THREECX_CLIENT_ID, THREECX_CLIENT_SECRET, THREECX_MCP_HTTP_TOKEN 필요 · 설정 1개 입력 필요(THREECX_FQDN)
  • 분류 클리닉 및 건강

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 2/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 2/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    3CX MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 3CX MCP을 쓰고 있다고 하거나 답에 3CX MCP 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 3CX MCP에 연결할 수 없어요

3CX MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · 3CX MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

B · 클리닉 및 건강에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 3CX MCP에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · 3CX MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Cursor는 아직 3CX MCP에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · 3CX MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

VS Code는 아직 3CX MCP에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · 3CX MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? 3CX MCP을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

직접 입력할 값

  • THREECX_CLIENT_ID 비밀 필수 env
    3CX MCP 서버의 THREECX_CLIENT_ID 자격 증명을 설정합니다.
    영어 원문 보기Set the THREECX_CLIENT_ID credential for the 3CX MCP server.
  • THREECX_CLIENT_SECRET 비밀 필수 env
    3CX MCP 서버의 THREECX_CLIENT_SECRET 자격 증명을 설정합니다.
    영어 원문 보기Set the THREECX_CLIENT_SECRET credential for the 3CX MCP server.
  • THREECX_FQDN 필수 env
    Host name of the 3CX phone system (for example pbx.example.com), the {fqdn} in https://{fqdn}/xapi/v1.
  • THREECX_BASE_URL env
    선택 사항. 전체 XAPI 기본 URL. 비워 두면 CLI가 https:// /xapi/v1을 만듭니다. 다른 호스트나 포트를 가리킬 때만 설정하세요.
    영어 원문 보기Optional. Full XAPI base URL. Leave blank: the CLI builds https:// /xapi/v1. Set it only to point at a different host or port.
  • THREECX_TOKEN_URL env
    선택 사항. 클라이언트 자격 증명 교환이 요청을 보내는 토큰 엔드포인트입니다. 비워 두면 CLI는 전화 시스템 자체의 /connect/token을 사용합니다. API와 같은 호스트에 있어야 합니다.
    영어 원문 보기Optional. Token endpoint the client-credentials exchange posts to. Leave blank: the CLI uses the phone system's own /connect/token. It must be on the same host as the API.
  • THREECX_OAUTH_SCOPE env
    선택 사항. 클라이언트 자격 증명 교환과 함께 전송되는 범위입니다. 비워 두면 범위를 전송하지 않습니다.
    영어 원문 보기Optional. Scope sent with the client-credentials exchange. Leave blank to send none.
  • THREECX_FLEET_DIR env
    선택 사항. 플릿 명령에서 사용하는 클라이언트 전화 시스템 레지스트리를 보관하는 디렉터리의 절대 경로입니다. 비워 두면 CLI의 구성 디렉터리를 사용합니다.
    영어 원문 보기Optional. Absolute path of the directory holding the registry of client phone systems used by the fleet commands. Leave blank to use the CLI's config directory.
  • THREECX_PBX env
    선택 사항. fleet add로 등록한 전화 시스템 중 하나의 이름입니다. 그러면 서버는 해당 PBX의 호스트, 클라이언트 ID, 시크릿 변수를 사용합니다(--pbx와 동일). 비워 두면 THREECX_FQDN과 기본 자격 증명 변수를 사용합니다.
    영어 원문 보기Optional. Name of one phone system registered with fleet add; the server then uses that PBX's host, client ID and secret variable (the same as --pbx). Leave blank to use THREECX_FQDN and the credenti…
  • THREECX_MCP_READ_ONLY env
    선택 사항입니다. 정확히 1로 설정하면 읽기 전용 도구만 노출되고, 상태를 변경하는 execute 호출은 모두 거부됩니다.
    영어 원문 보기Optional. Set to exactly 1 to expose only read-only tools and refuse any state-changing execute call.
  • THREECX_NO_LOCAL_DATA env
    선택 사항. 1로 설정하면 API 응답의 로컬 사본을 저장하지 않습니다. 읽기 요청은 API로 직접 전송되며 응답 캐시는 꺼집니다.
    영어 원문 보기Optional. Set to 1 to keep no local copy of API responses: reads go to the API and the response cache is off.
  • THREECX_MCP_HTTP_TOKEN 비밀 필수 env
    Required only when running the MCP server with --transport http (a remote/hosted deployment). Callers must send a matching Authorization: Bearer header. Not needed for the default local stdio transpo…
  • THREECX_USER_AGENT env
    선택 사항. CLI가 3CX 요청에 보내는 User-Agent를 재정의합니다. 비워 두면 CLI에 내장된 User-Agent를 사용합니다.
    영어 원문 보기Optional. Overrides the User-Agent the CLI sends on 3CX requests. Leave blank to use the CLI's own built-in User-Agent.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
84 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
npm/PyPI에 없음
라이선스i
라이선스 표시 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.1.5
레지스트리 공개i
2026년 11월 14일
코드 마지막 변경i
2026년 11월 19일
제작자
servosity
패키지
mcpb: …/threecx-mcp.mcpb
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 Servosity 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 어제

  • ! 주의

    라이선스 있음

    GitHub가 라이선스 종류를 알아내지 못했어요. 파일을 열어 확인하세요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/servosity-threecx-mcp.svg)](https://mcp.popnx.com/en/servers/servosity-threecx-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

클리닉 및 건강 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1198개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1198개 중 84%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1198개 중 52%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

3CX MCP, 안전한가요?

해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: THREECX_CLIENT_ID, THREECX_CLIENT_SECRET, THREECX_MCP_HTTP_TOKEN

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(0.1.5)은 6일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Medplum MCP, Mirobody, Codescene MCP Server, Marrow, WHOOP — MissingMCP

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Medplum MCP

Securely access and manage FHIR healthcare data stored in Medplum.

제작자: medplum널리 사용됨★ 2.8천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · medplum.com

Mirobody

Lab results to LOINC codes and UCUM units, symptoms and diagnoses to ICPC-3. Offline, no API key.

제작자: thetahealth성장 중↓ 725/주★ 1.6천어제 업데이트

내 컴퓨터에서 실행✓ thetahealth.ai

Marrow

Marrow Health: your Apple Health data over MCP, from the free iOS app. Reads, and writes on demand.

제작자: skeletonarmytech초기↓ 62/주★ 529일 전 업데이트

내 컴퓨터에서 실행✓ skeletonarmy.tech
비슷한 항목과 비교
이 항목
3CX MCP
Medplum MCPMirobodyCodescene MCP ServerMarrowWHOOP — MissingMCP
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요컴퓨터에 설치 필요컴퓨터에 설치 필요컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검2/34/43/32/33/32/4
라이선스NOASSERTIONApache-2.0Apache-2.0NOASSERTIONMITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

3CX + AI - for ChatGPT, Claude, GitHub Copilot, Microsoft 365 Copilot, Gemini, and any agent that speaks MCP

Unofficial. Community-built Claude Code Skill and MCP server for the 3CX

API. Not affiliated with, endorsed by, or sponsored by 3CX Ltd.

▶ Watch the 30-second demo - demo data is simulated; every command shown exists in the real CLI.

Run every client's 3CX phone system from one CLI: trunk, version, licence and backup health across the whole fleet, plus the full Configuration API on any single PBX. Works with the AI you already use - ChatGPT (Plus/Pro+), Claude Desktop, Codex, Claude Code, Claude Cowork, and GitHub Copilot - plus Microsoft 365 Copilot / Copilot Studio and Google Gemini via the remote path. Free, open source, runs on your laptop. Built for MSP owners. No code required.

Works with your agent

The six agents MSP owners actually use (self-serve, works today):

Your AI agentHow to install the 3CX skill
Claude DesktopRun installer, then Settings > Extensions to register threecx-mcp (no JSON editing).
ChatGPT (paid plans)Run installer, host threecx-mcp over HTTPS with THREECX_MCP_HTTP_TOKEN set, then register it as a Developer Mode connector if your connector settings can send the bearer token.
Codex CLIPaste the install prompt below.
Claude CodePaste the install prompt below.
Claude CoworkPaste the install prompt below.
GitHub Copilot (VS Code)Run installer, add threecx-mcp to mcp.json under the servers key, then pick Agent mode.

For ChatGPT, run threecx-mcp --transport http with THREECX_MCP_HTTP_TOKEN set, on an HTTPS host; every request sends that token. See mcp-install.md.

Also for the Microsoft and Google stacks

Big install base, but an honest heads-up: these are the remote / enterprise path, not the local binary you just installed.

AgentWhat it takes
Microsoft 365 Copilot / Copilot StudioNot self-serve. Host threecx-mcp over HTTPS with THREECX_MCP_HTTP_TOKEN set, then wire it into Copilot Studio (Tools > Add a tool > Model Context Protocol > Server URL) or a declarative agent, if it can send the bearer token. Needs a Copilot Studio license + tenant admin. See mcp-install.md.
Google GeminiGemini CLI is local - same as Claude Code. The Gemini app is remote - same HTTPS path as ChatGPT. See mcp-install.md.

Skill-native agents (also covered): Hermes and OpenClaw read this skill's SKILL.md directly *and* speak MCP - see their install sections below. Also works with Cursor, Windsurf, Cline, Continue.dev, and Zed via MCP. Full per-tool wire-up: [docs/which-agent.md](../../docs/which-agent.md).

Run more than one agent? Install across all 51+ supported agents in one command: npx skills add Servosity/msp-skills@latest (requires Node.js, then run the per-skill installer for the CLI/MCP binaries). See docs/which-agent.md.

Install in 60 seconds

Fastest for Claude Desktop - one-click .mcpb

Download 3CX MCP (.mcpb) - then open Claude Desktop > Settings > Extensions and select the file. One click, no JSON, no shell. (Browse every 3CX release on the releases page.)

Prefer the Claude Code plugin? Add the marketplace once, then install - works immediately, no directory listing required:

/plugin marketplace add Servosity/msp-skills

/plugin install threecx@msp-skills

Path A - paste one prompt into your AI agent (recommended)

Copy this into Claude Code, Codex CLI, or Claude Cowork:

Install the 3CX Skill and MCP server from Servosity/msp-skills in this agent workspace. If this workspace uses a POSIX shell (macOS, Linux, WSL, or Bash), run bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/threecx/install.sh). If it uses Windows PowerShell, run iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/threecx/install.ps1 | iex. Then authenticate per the README and run threecx-cli --help to explore.

The same prompt works in any agent that can run shell.

Path B - run the installer yourself

Windows (PowerShell):

iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/threecx/install.ps1 | iex

macOS / Linux:

bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/threecx/install.sh)

The installer drops both threecx-cli (the CLI) and threecx-mcp (the MCP server) into your user bin path. Claude Code, Codex, and Cowork discover the Skill via SKILL.md in this directory.

Verify:

threecx-cli --version
Upgrade to the latest version

The installer always fetches the current release - re-run it to upgrade:

macOS / Linux:

bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/threecx/install.sh)

Windows (PowerShell):

iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/threecx/install.ps1 | iex

Claude Desktop .mcpb users: download the latest .mcpb (top of this section) and re-select it in Settings > Extensions. Claude Code plugin users: /plugin update threecx@msp-skills.

Add to Claude Desktop, GitHub Copilot, Gemini CLI, Microsoft 365 Copilot, or another MCP client

After the installer runs, see [mcp-install.md](./mcp-install.md) and [docs/which-agent.md](../../docs/which-agent.md) for the per-agent wire-up - one section per agent, including the GitHub Copilot servers key and the remote Microsoft 365 Copilot / Copilot Studio path. Claude Desktop's Settings > Extensions panel is the simplest path; the MCP config block (for users who prefer editing JSON) is documented in mcp-install.md.

Install for Hermes

From the Hermes CLI:

hermes skills install servosity/msp-skills/skills/threecx --force

Inside a Hermes chat session:

/skills install servosity/msp-skills/skills/threecx --force

Hermes speaks MCP natively, so it can also use the threecx-mcp server directly - same install path, same env vars.

Install for OpenClaw

Tell your OpenClaw agent (copy this):

Install the threecx skill from https://github.com/servosity/msp-skills/tree/main/skills/threecx. The skill defines how its required CLI (threecx-cli) can be installed via the openclaw: frontmatter block.

OpenClaw isn't generally available yet; the frontmatter wiring is pre-shipped and will activate the moment OpenClaw launches.

Authenticate

Set the credentials the CLI needs (from your 3CX portal):

THREECX_CLIENT_ID=<value> THREECX_CLIENT_SECRET=<value> THREECX_FQDN=<value> threecx-cli doctor

doctor checks config, paths, and API reachability, and reports whether credentials are loaded - it does not validate them. Run a read command to confirm the credential actually works end-to-end.

What this skill does

Question your MSP keeps askingCommand
Which client phone systems are failing or warning, and why?threecx-cli fleet health --agent
Is any client's SIP trunk offline, misconfigured or in an unknown state?threecx-cli fleet trunks --offline --agent
Whose licence or maintenance expires in the next 60 days?threecx-cli fleet licences --within 60d --agent
Which PBXes are behind the newest build in our fleet, or have updates pending?threecx-cli fleet versions --behind --agent
Which clients have no backup in the last two days?threecx-cli fleet backups --stale 48h --problems --agent
What changed on our phone systems since yesterday?threecx-cli fleet changes --since 24h --agent
Who are the users on every client's PBX, in one table?threecx-cli fleet exec /Users --param '$select=Number,FirstName,LastName' --agent

Register each client PBX once (threecx-cli fleet add acme --fqdn acme.3cx.us --client-id 900 --env-prefix THREECX_ACME; the API key stays in THREECX_ACME_CLIENT_SECRET, never in a file). The fleet commands query every registered PBX live and in parallel; a PBX that cannot be read gets its own error row instead of stopping the run. Any generated command targets one PBX with --pbx .

Full command reference: guide.md. For the AI-agent operating contract (--agent, --dry-run, when to confirm before mutating), see AGENTS.md.

What makes this different

Every other 3CX tool we know of, from the admin console to 3CX's own MCP preview, the 3cx-xapi CLI and SSIG-IT/3cx-mcp-server, talks to one phone system per connection. An MSP's question is about the fleet: which of 40 clients has a trunk down this morning.

This skill keeps a local registry of every client PBX, each with its own API credential, and runs the health questions against all of them at once: fleet health rates each PBX pass, warn, fail or unknown on version, licence, backup, trunks, disk, services and capacity, and names each missing input instead of reading it as healthy. fleet changes compares saved runs, so trunks that went down or came back, version bumps, renewals and stale backups show up as a diff. For one PBX, sync mirrors its configuration into local SQLite for offline search.

The pain this closes

MSPs and VoIP resellers run one 3CX PBX per client, and 3CX gives them one admin console per PBX. A dead SIP trunk, a lapsed maintenance plan or a backup that stopped running is usually found when the client calls. The need is real enough that resellers build their own pollers: see the 3CX forum thread on centralized monitoring for 3CX instances (October 2025), where a partner describes checking every instance each minute and opening tickets.

  • fleet health: the morning check, one row per client with the reason for every warn or fail.
  • fleet trunks --offline: every trunk that is down, misconfigured or unknown, with certificate days left.
  • fleet licences --within 60d: the renewals pipeline, soonest first, with seat headroom.
  • fleet backups --problems: stale, unscheduled or shrinking backups.

See pain-point.md for the longer narrative.

Frequently asked questions

Does this work with ChatGPT?

Yes, on Plus, Pro, Team, Business, Enterprise, and Education plans (Free tier does not yet expose Developer Mode). ChatGPT connects to remote MCP servers over HTTPS, not local stdio binaries. The 3CX MCP server runs locally over stdio by default. Its HTTP mode (threecx-mcp --transport http) serves http://127.0.0.1:7777/mcp, refuses to start until THREECX_MCP_HTTP_TOKEN is set, requires Authorization: Bearer on every request, and needs --tls-cert/--tls-key for any other address. See mcp-install.md. Step-by-step in mcp-install.md.

Does this work with Codex, Cursor, Windsurf, Cline, Copilot, or Gemini?

Yes - all

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요