프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Skipper

제작자: seuros버전 0.10.3i★ 23i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.seuros/skipper

설치 방법

What it does

Git and forge ops: local git via gitoxide, plus GitHub, GitLab, Gitea and Forgejo

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 개발자 도구

함께 쓰기

이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다

rea

Reverse engineer anything with agents, from app behavior down to native binaries.

제작자: morluto★ 467,235skill 1개

Skill · 안내서

andrej-karpathy-skills

A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.

제작자: multica-ai★ 234,125skill 1개

Skill · 안내서라이선스 명시 없음

graphify

Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.

제작자: Graphify-Labs★ 149,873skill 1개

Skill · 안내서

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기17/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수29/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude는 아직 Skipper에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

ChatGPT는 아직 Skipper에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

대신 이렇게 할 수 있어요

B · 개발자 도구에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Skipper에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Cursor는 아직 Skipper에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

VS Code는 아직 Skipper에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Skipper을 쓰는 사람에게 물어보세요💬 토론 →

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
라이선스i
BSD-2-Clause
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.10.3
카테고리i
개발자 도구
레지스트리 공개i
2026년 11월 9일
코드 마지막 변경i
2026년 11월 17일
제작자
seuros
패키지
cargo: skipper
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

GooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 seuros 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 그저께

  • ✓ 통과

    라이선스 있음

    BSD-2-Clause 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/seuros-skipper.svg)](https://mcp.popnx.com/en/servers/seuros-skipper)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

개발자 도구 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 6136개 중 93%보다 스타가 많아요
  • 이 카테고리의 다른 서버 6136개 중 80%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 6136개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Skipper, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 그저께 변경됐고, 최신 버전(0.10.3)은 10일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Rust도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

GitDiagram

Architecture diagrams, explanations and Mermaid source for public GitHub repositories.

제작자: ahmedkhaleel2004널리 사용됨★ 1.9만2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · gitdiagram.comPopNx 팀이 직접 써 봄

Appllama

Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.

제작자: Appllama널리 사용됨★ 5.2천3개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · appllama.io

Omnara

Deploy durable AI agents with Omnara, an open-source managed-agent platform.

제작자: omnara-ai널리 사용됨★ 3.4천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · omnara.com

Repowise

Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.

제작자: repowise-dev널리 사용됨↓ 6.5천/주★ 8.2천 저장소 전체의 별6일 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · repowise.dev
비슷한 항목과 비교
이 항목
Skipper
GitDiagramAppllamaCloudflare MCPOmnaraRepowise
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요예아니요아니요
기본 점검3/34/44/44/44/45/5
라이선스BSD-2-ClauseMITMITApache-2.0Apache-2.0AGPL-3.0
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

skipper

MCP server for working in a git repository: local git in-process, and GitHub, GitLab, Gitea, and Forgejo behind one small set of tools.

Why

The existing forge MCP servers expose the API, not a workflow. Counted from their own sources: GitHub's has ~125 tools, GitLab's ~88, Gitea's ~54. One tool per endpoint, three servers, three vocabularies, and an agent that has to work out which one it is talking to.

Skipper registers 20, and shows fewer than that: only the ones this repository can actually use, and the four that write only when you turn them on.

An agent does not need to be emperor of your forge. It does not need to create or destroy an organization on any given turn. It needs to know what this repository is, whether the build passed, and what broke. Skipper exposes that and skips the rest.

By default, no skipper tool can write to a forge. There is no create, delete, close, or fork, and out of the box no merge, push, fetch, or pull either: the only state any tool changes is local (staging, committing, local branches), so an agent cannot move a commit to a remote through skipper.

Merging and syncing are opt-in, in your global config only (~/.config/skipper/config.toml); a repository's own skipper.toml cannot turn them on:

[writes]

enabled = true # show pr_merge, git_push, git_pull, git_fetch confirm = true # default: ask before each merge or push

With confirm, every merge and push is put to you through the client (MCP elicitation) with exactly what will happen, such as push master to github, origin or rebase #6 "chore: release 0.6.0" (release → master), and runs only if you approve. A client that cannot ask is refused; confirm = false lets writes run unattended. Even then nothing forces or deletes: +ref, a:b and -option refspecs are refused, and a merge is pinned to the head sha it was checked at, so a push in between fails it.

The destructive operations still exist in the CLIs. To delete a release, an agent calls gh directly, which your harness can allow or deny with one rule. That is one binary to gate instead of 267 tools to audit.

How it talks to things

LayerTransport
local gitgitoxide, in-process
GitHubREST and GraphQL over rama, token from gh auth token
GitLabthe glab CLI
Gitea, ForgejoREST over rama, token from tea's config

Authentication

Local git needs no credentials: it reads and writes the repository directly, never the network.

For forges, skipper reuses the credentials the CLIs already hold. It stores no tokens of its own. Log in as usual:

gh auth login

glab auth login tea login add

For GitHub, skipper asks gh auth token for the token once per host (it honours GH_TOKEN), keeps it in memory only, and calls the API itself: one HTTP request instead of a gh process per query. A 401 fetches the token again, so gh auth refresh or a rotated token needs no restart.

For Gitea and Forgejo, skipper reads the token from tea's config instead of running tea, which can block on an interactive prompt that never resolves under a non-interactive server. tea login add is still how you set it up.

Requirements

Building from source requires Rust 1.99 or newer. The repository pins Rust 1.99.0 for local and release builds.

ProviderCLIMinimumAuth
GitHubgh2.50gh auth login
GitLabglab1.40glab auth login
Gitea / Forgejotea0.9tea login add

Local git needs no binary: it runs in-process on gitoxide.

A missing, outdated, or unauthenticated CLI just hides that provider's tools. An auth check that fails on the network (timeout, connection reset) is not treated as logged out: skipper retries it with backoff for a few minutes and announces the tools with tools/list_changed once it answers. Detection results are logged to stderr, which MCP clients keep in their server logs.

Tool visibility

Tools follow the repository, not the toolbox. A forge's tools appear only when all of the following hold:

  1. the workspace is a git repository,
  2. one of its remotes points at that forge, and
  3. the forge's CLI is installed, new enough, and authenticated.

Git tools need only a repository; they do not depend on any CLI.

So an installed gh does not put GitHub tools in front of a checkout hosted on Forgejo. github.com, gitlab.com, and codeberg.org are recognized out of the box; self-hosted instances are mapped in config:

# ~/.config/skipper/config.toml (global) or ./skipper.toml (per repo)

[hosts] "github.enterprise.com" = "github" "gitlab.internal" = "gitlab" "192.168.3.20" = "forgejo"

Forge names accept aliases: github/gh, gitlab/glab, and gitea/forgejo/tea (Gitea and Forgejo are both driven by tea). Remotes whose host isn't mapped simply expose no forge tools. The unmapped hosts are logged at startup so you know what to add.

Visibility is re-evaluated while the server runs. The remotes are re-read before every tools/list and tools/call, so git init, git remote add, re-pointing a remote, or removing one applies to the next call; a background watcher also emits notifications/tools/list_changed within a few seconds so clients re-list. No restart needed.

Installation

curl -fsSL https://raw.githubusercontent.com/seuros/skipper/master/scripts/install.sh | bash

It picks the latest release and the right build for your machine, and installs to ~/.local/bin. Pass --prefix for somewhere else or --version for a specific tag. Prebuilt for Linux and macOS, x86_64 and arm64.

Or build it yourself:

cargo install skipper

Either way you get the skipper binary. Skipper is a server, not a library: the crate builds the binary alone. Depend on the MCP tools and resources.

MCP setup

Skipper speaks MCP over stdio. Add it to your client config:

{

"mcpServers": { "skipper": { "command": "skipper" } } }

Tools

ToolProviderPurpose
repo_searchGitea/ForgejoSearch repositories by name, paginated
gh_repo_listGitHubList repositories for the authenticated user
glab_project_listGitLabList projects for the authenticated user
build_statusGitHub/GitLabCI run or pipeline status for the current repository
build_watchGitHub/GitLabWait for a CI run's status to change, up to a bounded time; commit= waits for every run of a commit (task-capable)
pr_build_waitGitHubWait for a PR's checks to finish; structured verdict (task-capable)
pr_watchGitHubWatch PRs for merge, close, comments, reviews, checks, and pushes (task-capable)
pr_mergeGitHub, writesMerge a PR after checking state, draft, conflicts, checks and the allowed method; confirmed
git_pushwritesPush branches and tags to one, several, or all remotes; never forces; confirmed
git_pullwritesFast-forward the branch to its upstream; never merges
git_fetchwritesFetch one or all remotes, pruning deleted branches
git_statusgitStaged, unstaged, and untracked files
git_diffgitScoped patches, stats, or changed paths
git_loggitRecent commits
git_showgitCommit details with subject, body, trailers
git_show_filegitA tracked file at a revision
git_blamegitPer-line attribution
git_addgitStage explicit paths
git_commitgitCommit staged changes, with trailers or amend
git_branchgitCreate or delete a local branch

Resources

Questions about *this* repository are resources, not tools, and they are scoped by the workspace's remotes rather than your account.

URIProviderContents
skipper://workspaceanyThe current workspace: working directory, repo root, branch, HEAD, dirty state, remotes (credentials stripped) and the forge each maps to, the current remote marked
skipper://repoGitea/ForgejoThe repository this workspace's remote points at, trying the current remote, then origin, when several match
skipper://issues/{state}GitHub, Gitea/ForgejoThe current remote's last 30 issues in open, closed or all state, latest update first: number, title, state, author, labels, comment count, created and updated times
skipper://issue/{number}GitHub, Gitea/ForgejoOne issue of the current remote: title, state, author, creation time, labels, assignees, the full body and every comment, cleaned like PR comments
skipper://pr/{number}GitHubWhat a merge decision needs, in one read: state, draft, head/base and head sha, mergeability, review decision, the checks' verdict (conclusion, counts, failed checks), allowed and default merge methods, labels, size; current selects the current branch's
skipper://pr/{number}/filesGitHubThe files a PR changes, with added and deleted lines
skipper://pr/{number}/checksGitHubCheck matrix for a PR, by workflow; links and descriptions on failures only; current selects the current branch's
skipper://pr/{number}/commentsGitHubA PR's state (open/closed/merged), its description, and every inline review comment, conversation comment and review, in full: HTML comments and tags dropped, entities decoded, collapsed opened, and bot machinery removed (CodeRabbit's tool transcripts, run info, buttons, share links; release-please's greeting and footer)
skipper://pr/{number}/comments/{kind}GitHubThe same, keeping only inline, comment or review notes (all keeps every one)
skipper://watch/comments/{kind}GitHubskipper://pr/{number}/comments/{kind} for every PR under pr_watch, in one read; recently finished PRs report their final state, and a PR that cannot be read reports its error
skipper://prs/{state}/{author}GitHubThe last 30 PRs in open, closed, merged or all state by an author (me for the authenticated user): number, state, merge time
skipper://watchGitHubPRs under pr_watch: status, checks, recent and undelivered events

Percent-encode author names in PR-list URIs. Bot brackets must be %5B and %5D, for example: skipper://prs/open/github-actions%5Bbot%5D?repo=seuros/behavior_machines. The GitHub search still receives the login github-actions[bot].

Current remote

Issue resources read from one remote, picked fresh on every read:

  1. the remote the checked-out branch tracks (branch. .remote);
  2. else the only remote;
  3. else origin.

With several remotes and none of these, the read fails and says so rather than guess. Switching branches or running git branch -u moves the next read to the other forge; no restart. Every issue payload names the forge and repo it came from. A Gitea/Forgejo token needs the read:issue scope.

GitHub-only reads (PR checks and discussion, CI runs, pr_watch) take the current remote when it is on GitHub, else the one GitHub repo among the remotes, so they keep working while the branch tracks a mirror on another forge. Two different GitHub repos (a fork and its upstream) with neither current is an error naming both.

Any PR or issue read can name another repo: ?repo= on the resources (skipper://pr/7289/comments?repo=upstream, skipper://issues/open?repo=matz/spinel) and repo on pr_watch, pr_merge and pr_build_wait, as a remote name or owner/name. Skipper never follows GitHub's fork link on its own: it is history, not intent (trailblazer/representable is a fork of roxml). A PR missing from a fork says what the parent is, and the agent picks. A branch's PR read on another repo is still the one from this checkout's branch. Ever

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요