What it does
Read Spanish family recipes from Pequerecetas and rescale them honestly. No API key.
- Connects 내 컴퓨터에서 실행
- Account or key No key needed
- Category 게임, 스포츠, 음식 및 학습
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
MCP Pequerecetas 설치해 줘. https://mcp.popnx.com/i/smeet666-mcp-pequerecetas.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기
해 보기
MCP Pequerecetas을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 MCP Pequerecetas을 쓰고 있다고 하거나 답에 MCP Pequerecetas 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PQR_USER_AGENTIdentify your own client. This project's identifier stays appended, so the site can always reach a human.PQR_MIN_INTERVAL_MS요청 사이의 최소 밀리초. 기본값 3000, 하한 3000, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 3000, floor 3000, ceiling 60000.PQR_TIMEOUT_MSDeadline for one request, in milliseconds. Default 20000.PQR_MAX_RETRIES사이트가 바쁘거나 공간을 요구할 때의 재시도 횟수. 기본값은 3입니다.영어 원문 보기
Retries when the site is busy or asks for room. Default 3.PQR_CACHE_TTL_MSIn-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.PQR_CACHE_MAX_ENTRIESIn-memory cache size. Default 200.PQR_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 MCP Pequerecetas에 연결할 수 없어요
MCP Pequerecetas는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · MCP Pequerecetas에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
- 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
- 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
- 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
B · 게임, 스포츠, 음식 및 학습에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- ShipSwift✓ ChatGPT
- Anime Garden✓ ChatGPT
- Summer Engine✓ ChatGPT
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server MCP Pequerecetas을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user pequerecetas -- npx -y mcp-pequerecetas 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Pequerecetas의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Node.js 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -v- 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
node -v한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
터미널 열기
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
이 명령을 붙여 넣고 Enter
claude mcp add --scope user pequerecetas -- npx -y mcp-pequerecetasClaude Code에서 /mcp 입력
MCP Pequerecetas이 목록에 있고 연결됨으로 보이면 돼요
해 보기
MCP Pequerecetas을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 MCP Pequerecetas을 쓰고 있다고 하거나 답에 MCP Pequerecetas 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PQR_USER_AGENTIdentify your own client. This project's identifier stays appended, so the site can always reach a human.PQR_MIN_INTERVAL_MS요청 사이의 최소 밀리초. 기본값 3000, 하한 3000, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 3000, floor 3000, ceiling 60000.PQR_TIMEOUT_MSDeadline for one request, in milliseconds. Default 20000.PQR_MAX_RETRIES사이트가 바쁘거나 공간을 요구할 때의 재시도 횟수. 기본값은 3입니다.영어 원문 보기
Retries when the site is busy or asks for room. Default 3.PQR_CACHE_TTL_MSIn-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.PQR_CACHE_MAX_ENTRIESIn-memory cache size. Default 200.PQR_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server MCP Pequerecetas을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "pequerecetas": { "command": "npx", "args": [ "-y", "mcp-pequerecetas" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Pequerecetas의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Node.js 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -v- 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
node -v한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Cursor에서 AI 채팅을 Agent 모드로 열기
해 보기
MCP Pequerecetas을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 MCP Pequerecetas을 쓰고 있다고 하거나 답에 MCP Pequerecetas 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PQR_USER_AGENTIdentify your own client. This project's identifier stays appended, so the site can always reach a human.PQR_MIN_INTERVAL_MS요청 사이의 최소 밀리초. 기본값 3000, 하한 3000, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 3000, floor 3000, ceiling 60000.PQR_TIMEOUT_MSDeadline for one request, in milliseconds. Default 20000.PQR_MAX_RETRIES사이트가 바쁘거나 공간을 요구할 때의 재시도 횟수. 기본값은 3입니다.영어 원문 보기
Retries when the site is busy or asks for room. Default 3.PQR_CACHE_TTL_MSIn-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.PQR_CACHE_MAX_ENTRIESIn-memory cache size. Default 200.PQR_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server MCP Pequerecetas을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "pequerecetas": { "type": "stdio", "command": "npx", "args": [ "-y", "mcp-pequerecetas" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Pequerecetas의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Node.js 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -v- 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
node -v한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
VS Code에서 AI 채팅을 Agent 모드로 열기
해 보기
MCP Pequerecetas을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 MCP Pequerecetas을 쓰고 있다고 하거나 답에 MCP Pequerecetas 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PQR_USER_AGENTIdentify your own client. This project's identifier stays appended, so the site can always reach a human.PQR_MIN_INTERVAL_MS요청 사이의 최소 밀리초. 기본값 3000, 하한 3000, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 3000, floor 3000, ceiling 60000.PQR_TIMEOUT_MSDeadline for one request, in milliseconds. Default 20000.PQR_MAX_RETRIES사이트가 바쁘거나 공간을 요구할 때의 재시도 횟수. 기본값은 3입니다.영어 원문 보기
Retries when the site is busy or asks for room. Default 3.PQR_CACHE_TTL_MSIn-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.PQR_CACHE_MAX_ENTRIESIn-memory cache size. Default 200.PQR_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
개발자용: 터미널 명령과 JSON 설정
컴퓨터에 설치
Claude Code
claude mcp add --scope user pequerecetas -- npx -y mcp-pequerecetasClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"pequerecetas": {
"command": "npx",
"args": [
"-y",
"mcp-pequerecetas"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"pequerecetas": {
"command": "npx",
"args": [
"-y",
"mcp-pequerecetas"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"pequerecetas": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"mcp-pequerecetas"
]
}
}
}직접 입력할 값
PQR_USER_AGENTenvIdentify your own client. This project's identifier stays appended, so the site can always reach a human.PQR_MIN_INTERVAL_MSenv요청 사이의 최소 밀리초. 기본값 3000, 하한 3000, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 3000, floor 3000, ceiling 60000.PQR_TIMEOUT_MSenvDeadline for one request, in milliseconds. Default 20000.PQR_MAX_RETRIESenv사이트가 바쁘거나 공간을 요구할 때의 재시도 횟수. 기본값은 3입니다.영어 원문 보기
Retries when the site is busy or asks for room. Default 3.PQR_CACHE_TTL_MSenvIn-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.PQR_CACHE_MAX_ENTRIESenvIn-memory cache size. Default 200.PQR_LOG_LEVELenvsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
한눈에 보기
- 주간 다운로드i
- 237/주
- 연결 방식
- 내 컴퓨터에서 실행
- 최신 버전i
- 1.2.0
- 레지스트리 공개i
- 2026년 10월 29일
- 코드 마지막 변경i
- 2026년 11월 16일
- 제작자
- smeet666
- 패키지
npm: mcp-pequerecetasmcpb: …/mcp-pequerecetas-1.2.0.mcpb- 웹사이트
- github.com
- 레지스트리 상태
- 활성
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 18일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 smeet666 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 그저께
- ✓ 통과
라이선스 있음
MIT 사용
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
공개된 취약점 (OSV.dev)
OSV.dev에 mcp-pequerecetas@1.2.0 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/smeet666-mcp-pequerecetas)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
게임, 스포츠, 음식 및 학습 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 1593개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 1593개 중 57%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 1593개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
MCP Pequerecetas, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 그저께 변경됐고, 최신 버전(1.2.0)은 20일 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, MCPB도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft, GoodWatch
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
WilmAI
Finland's Wilma school system for parents and students: schedule, homework, exams and messages.
Lumify Sports Intelligence
Schedules, scores, odds, splits & explainable AI bet confidence — 8+ sports, free instant key.
Savecraft
Savecraft serves real save game data and expert game knowledge to AI assistants.
GoodWatch
Find movies and TV shows, track watches, and get suggestions based on your taste.
| 이 항목 MCP Pequerecetas | Anime Garden | WilmAI | Lumify Sports Intelligence | Savecraft | GoodWatch | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 3/3 | 4/4 | 3/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | MIT | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
mcp-pequerecetas
Pequerecetas is a Spanish home-cooking site written for families. It holds a few thousand recipes with their ingredients, their steps and their photographs, and files each one under the diet it suits, the appliance it is cooked in, the occasion it is made for and the age of whoever eats it, from six months up.
This server connects a chat client to that site. You can search its recipes, read one with its quantities rescaled to the number of people at your table, list the values each taxonomy publishes, walk a taxonomy page by page, and rescale any Spanish ingredient list you already hold. It needs no API key and no account.
_Version française_
Install
One-click install
Claude Code
claude mcp add pequerecetas -- npx -y mcp-pequerecetas
Claude Desktop, Cursor, and any client using the standard config format
{
"mcpServers": { "pequerecetas": { "command": "npx", "args": ["-y", "mcp-pequerecetas"] } } }
Node 24 or later is required, and no environment variable has to be set.
With Docker
{
"mcpServers": { "pequerecetas": { "command": "docker", "args": ["run", "-i", "--rm", "ghcr.io/smeet666/mcp-pequerecetas:1.2.0"] } } }
-i keeps stdin open, which is where the protocol travels, and -t is left out because a TTY rewrites the stream. The container needs outbound HTTPS to www.pequerecetas.com, and nothing else: no volume, no port, no credential.
Bundle, without npm
Download mcp-pequerecetas-1.2.0.mcpb from the latest release and open it. A client that supports MCP bundles installs it on its own, with no npm and no configuration file to edit. The bundle carries its dependencies, so nothing is fetched at install time.
What you can ask
- « Búscame una receta de paella de marisco. »
- "Read me that recipe for eight people."
- "What can I cook in an air fryer on this site?"
- "Show me the purées it files under six months."
- "Scale this Spanish ingredient list by three."
Pequerecetas is written in Spanish and its search matches the words a page was written with, so recipes are found in Spanish. The ordinary path runs from a search or a taxonomy to a recipe: a row carries an id, and get_recipe takes that id.
Tools
| Tool | What it does |
|---|---|
get_recipe | Reads one page of the recipe section, rescaled on request. |
search_recipes | Finds recipes by dish or by ingredient. |
list_facets | Lists the values each taxonomy publishes. |
browse_recipes | Reads one taxonomy, page by page. |
scale_ingredients | Rescales any Spanish ingredient list, with no request to the site. |
get_recipe
Reads one page of the recipe section, and rescales its quantities when a number of servings is given.
| Argument | Type | Required | What it does |
|---|---|---|---|
id | string, 1 to 200 characters | yes | The slug in a recipe's address, as a row carries it. |
servings | integer, 1 to 1000 | no | Rescale the quantities to this many. |
In return: kind, which reads recipe or collection. The site publishes both at this kind of address and describes them alike, so this is what tells them apart: a collection is an article gathering other recipes, and it comes back with headings and recipes, the rows it points at, in place of a recipe's fields.
A recipe carries source_shape, reading structured when the block the page publishes for search engines held its ingredients and article when they were read from the body of the page, which is where most of this site's recipes keep them. Then come title, url, description, published_at, modified_at, prep_minutes, cook_minutes, total_minutes, categories, cuisines, keywords, author, author_url, rating, nutrition and images, each null or empty where the page states nothing. yield says what the recipe was written for and what it was rescaled to; a page stating no number of servings comes back with factor at 1 and a note saying why. Each line of ingredients carries scaling, reading scaled, rounded or unscaled, and is_equipment, which marks a line naming a tool rather than something eaten.
search_recipes
Searches the recipes for a dish or an ingredient.
| Argument | Type | Required | What it does |
|---|---|---|---|
query | string, 1 to 120 characters | yes | A dish or an ingredient, in Spanish. |
limit | integer, 1 to 60 | no | Rows to return. |
In return: rows carrying id, which get_recipe takes, title, url and image_url. Alongside come result_count for the rows returned and total_available, which is always null: the site publishes no count of what a search matched. The site serves its search on a single page and answers a request for a second with the first again, so these are all the rows it offers for a query. Some rows are articles gathering recipes, which get_recipe reports as a collection.
list_facets
Lists the values the site browses its recipes by, read from the sitemap each taxonomy publishes.
| Argument | Type | Required | What it does |
|---|---|---|---|
facet | string, 1 character and up | no | One taxonomy. All eight when left out. |
The taxonomies are dieta, edad, ingrediente, ocasion, recetas-de, tecnica, tipo-de-cocina and tipo-plato: diet, the age of whoever eats it, main ingredient, occasion, moment of the day, appliance, cuisine and kind of dish.
In return: facets, each carrying name, value_count and values, whose value is the slug browse_recipes takes. The values keep the order the site publishes them in. Reading all eight costs one request per taxonomy. A taxonomy that could not be read is named in notes and left out of facets, so a listing short of one never reads like a site that has seven.
browse_recipes
Reads one page of a taxonomy's recipes.
| Argument | Type | Required | What it does |
|---|---|---|---|
facet | string, 1 character and up | yes | The taxonomy to browse. |
value | string, 1 to 120 characters | yes | A slug from list_facets, such as thermomix. |
page | integer, 1 to 200 | no | Which page to read, the first by default. |
In return: rows of the same shape search_recipes returns, with page_served for the page the site actually served, has_more for whether its own pagination offers another, and total_available, always null because the site prints no count on these pages. The site writes its own slugs, so one built by hand reaches a page it does not hold and comes back as not_found. The taxonomies cannot be combined: the site offers no way to ask for two at once.
scale_ingredients
Rescales a list of Spanish ingredient lines. It reaches no site.
| Argument | Type | Required | What it does |
|---|---|---|---|
ingredients | array of 1 to 200 strings | yes | The lines to rescale, as written. |
factor | number, greater than 0 up to 1000 | one of | What to multiply the quantities by. |
from_servings | integer, 1 to 1000 | one of | How many the list was written for. |
to_servings | integer, 1 to 1000 | one of | How many it should serve. |
Give factor, or from_servings and to_servings together. Naming both ways at once is refused, because they can ask for different things.
In return: each line with text as it now reads, original as it was given, amount, amount_max, unit, and scaling, which carries the honesty of the answer: scaled when the arithmetic landed exactly, rounded when the value moved to stay something a kitchen can measure out, unscaled when the line carries no quantity. is_equipment marks a line naming a tool. Alongside come scaled_count, rounded_count and unscaled_count. Nothing is converted between unit systems, and an approximate measure such as a pizca keeps the size the cook gives it.
Configuration
| Variable | Default | Bounds | What it does |
|---|---|---|---|
PQR_USER_AGENT | unset | Prefixed to this server's own User-Agent. | |
PQR_MIN_INTERVAL_MS | 3000 | 3000 to 60000 | Milliseconds between two requests. |
PQR_TIMEOUT_MS | 20000 | 1000 to 120000 | How long one request may take. |
PQR_MAX_RETRIES | 3 | 0 to 8 | Attempts at a request the site did not answer. |
PQR_CACHE_TTL_MS | 900000 | 0 to 86400000 | How long a read is held. Zero turns the store off. |
| PQR_CACHE_MAX_ENTRIES | 200 | 1 to 5000 | Reads held at once.