What it does
Search the Wikibooks Cookbook, read a recipe and rescale it to any number of servings.
- Connects 내 컴퓨터에서 실행
- Account or key No key needed
- Category 게임, 스포츠, 음식 및 학습
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
MCP Wikibooks Cookbook 설치해 줘. https://mcp.popnx.com/i/smeet666-mcp-wikibooks-cookbook.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기
해 보기
MCP Wikibooks Cookbook을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 MCP Wikibooks Cookbook을 쓰고 있다고 하거나 답에 MCP Wikibooks Cookbook 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
WB_USER_AGENT자신의 클라이언트를 식별합니다. 이 프로젝트의 식별자는 계속 덧붙여져, Wikimedia가 항상 사람에게 연락할 수 있습니다.영어 원문 보기
Identify your own client. This project's identifier stays appended, so Wikimedia can always reach a human.WB_MIN_INTERVAL_MS요청 간 최소 간격(밀리초). 기본값 1000, 하한 500, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 1000, floor 500, ceiling 60000.WB_TIMEOUT_MS요청 1회당 제한 시간(밀리초)입니다. 기본값은 20000입니다.영어 원문 보기
Deadline for one request, in milliseconds. Default 20000.WB_MAX_RETRIES게이트웨이가 바쁘거나 속도 제한에 걸리면 재시도합니다. 기본값은 3입니다.영어 원문 보기
Retries on a busy or rate-limited gateway. Default 3.WB_CACHE_TTL_MS인메모리 캐시의 수명(밀리초). 기본값은 900000입니다. 0으로 설정하면 끕니다.영어 원문 보기
In-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.WB_CACHE_MAX_ENTRIES인메모리 캐시 크기. 기본값은 200입니다.영어 원문 보기
In-memory cache size. Default 200.WB_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 MCP Wikibooks Cookbook에 연결할 수 없어요
MCP Wikibooks Cookbook는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · MCP Wikibooks Cookbook에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
- 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
- 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
- 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
B · 게임, 스포츠, 음식 및 학습에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- ShipSwift✓ ChatGPT
- Anime Garden✓ ChatGPT
- Summer Engine✓ ChatGPT
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server MCP Wikibooks Cookbook을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user wikibooks-cookbook -- npx -y mcp-wikibooks-cookbook 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Wikibooks Cookbook의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Node.js 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -v- 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
node -v한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
터미널 열기
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
이 명령을 붙여 넣고 Enter
claude mcp add --scope user wikibooks-cookbook -- npx -y mcp-wikibooks-cookbookClaude Code에서 /mcp 입력
MCP Wikibooks Cookbook이 목록에 있고 연결됨으로 보이면 돼요
해 보기
MCP Wikibooks Cookbook을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 MCP Wikibooks Cookbook을 쓰고 있다고 하거나 답에 MCP Wikibooks Cookbook 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
WB_USER_AGENT자신의 클라이언트를 식별합니다. 이 프로젝트의 식별자는 계속 덧붙여져, Wikimedia가 항상 사람에게 연락할 수 있습니다.영어 원문 보기
Identify your own client. This project's identifier stays appended, so Wikimedia can always reach a human.WB_MIN_INTERVAL_MS요청 간 최소 간격(밀리초). 기본값 1000, 하한 500, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 1000, floor 500, ceiling 60000.WB_TIMEOUT_MS요청 1회당 제한 시간(밀리초)입니다. 기본값은 20000입니다.영어 원문 보기
Deadline for one request, in milliseconds. Default 20000.WB_MAX_RETRIES게이트웨이가 바쁘거나 속도 제한에 걸리면 재시도합니다. 기본값은 3입니다.영어 원문 보기
Retries on a busy or rate-limited gateway. Default 3.WB_CACHE_TTL_MS인메모리 캐시의 수명(밀리초). 기본값은 900000입니다. 0으로 설정하면 끕니다.영어 원문 보기
In-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.WB_CACHE_MAX_ENTRIES인메모리 캐시 크기. 기본값은 200입니다.영어 원문 보기
In-memory cache size. Default 200.WB_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server MCP Wikibooks Cookbook을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "wikibooks-cookbook": { "command": "npx", "args": [ "-y", "mcp-wikibooks-cookbook" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Wikibooks Cookbook의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Node.js 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -v- 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
node -v한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Cursor에서 AI 채팅을 Agent 모드로 열기
해 보기
MCP Wikibooks Cookbook을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 MCP Wikibooks Cookbook을 쓰고 있다고 하거나 답에 MCP Wikibooks Cookbook 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
WB_USER_AGENT자신의 클라이언트를 식별합니다. 이 프로젝트의 식별자는 계속 덧붙여져, Wikimedia가 항상 사람에게 연락할 수 있습니다.영어 원문 보기
Identify your own client. This project's identifier stays appended, so Wikimedia can always reach a human.WB_MIN_INTERVAL_MS요청 간 최소 간격(밀리초). 기본값 1000, 하한 500, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 1000, floor 500, ceiling 60000.WB_TIMEOUT_MS요청 1회당 제한 시간(밀리초)입니다. 기본값은 20000입니다.영어 원문 보기
Deadline for one request, in milliseconds. Default 20000.WB_MAX_RETRIES게이트웨이가 바쁘거나 속도 제한에 걸리면 재시도합니다. 기본값은 3입니다.영어 원문 보기
Retries on a busy or rate-limited gateway. Default 3.WB_CACHE_TTL_MS인메모리 캐시의 수명(밀리초). 기본값은 900000입니다. 0으로 설정하면 끕니다.영어 원문 보기
In-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.WB_CACHE_MAX_ENTRIES인메모리 캐시 크기. 기본값은 200입니다.영어 원문 보기
In-memory cache size. Default 200.WB_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server MCP Wikibooks Cookbook을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "wikibooks-cookbook": { "type": "stdio", "command": "npx", "args": [ "-y", "mcp-wikibooks-cookbook" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Wikibooks Cookbook의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Node.js 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -v- 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
node -v한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
VS Code에서 AI 채팅을 Agent 모드로 열기
해 보기
MCP Wikibooks Cookbook을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 MCP Wikibooks Cookbook을 쓰고 있다고 하거나 답에 MCP Wikibooks Cookbook 도구 이름이 나오면 연결된 거예요
추가 설정 7개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
WB_USER_AGENT자신의 클라이언트를 식별합니다. 이 프로젝트의 식별자는 계속 덧붙여져, Wikimedia가 항상 사람에게 연락할 수 있습니다.영어 원문 보기
Identify your own client. This project's identifier stays appended, so Wikimedia can always reach a human.WB_MIN_INTERVAL_MS요청 간 최소 간격(밀리초). 기본값 1000, 하한 500, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 1000, floor 500, ceiling 60000.WB_TIMEOUT_MS요청 1회당 제한 시간(밀리초)입니다. 기본값은 20000입니다.영어 원문 보기
Deadline for one request, in milliseconds. Default 20000.WB_MAX_RETRIES게이트웨이가 바쁘거나 속도 제한에 걸리면 재시도합니다. 기본값은 3입니다.영어 원문 보기
Retries on a busy or rate-limited gateway. Default 3.WB_CACHE_TTL_MS인메모리 캐시의 수명(밀리초). 기본값은 900000입니다. 0으로 설정하면 끕니다.영어 원문 보기
In-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.WB_CACHE_MAX_ENTRIES인메모리 캐시 크기. 기본값은 200입니다.영어 원문 보기
In-memory cache size. Default 200.WB_LOG_LEVELsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
개발자용: 터미널 명령과 JSON 설정
컴퓨터에 설치
Claude Code
claude mcp add --scope user wikibooks-cookbook -- npx -y mcp-wikibooks-cookbookClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"wikibooks-cookbook": {
"command": "npx",
"args": [
"-y",
"mcp-wikibooks-cookbook"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"wikibooks-cookbook": {
"command": "npx",
"args": [
"-y",
"mcp-wikibooks-cookbook"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"wikibooks-cookbook": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"mcp-wikibooks-cookbook"
]
}
}
}직접 입력할 값
WB_USER_AGENTenv자신의 클라이언트를 식별합니다. 이 프로젝트의 식별자는 계속 덧붙여져, Wikimedia가 항상 사람에게 연락할 수 있습니다.영어 원문 보기
Identify your own client. This project's identifier stays appended, so Wikimedia can always reach a human.WB_MIN_INTERVAL_MSenv요청 간 최소 간격(밀리초). 기본값 1000, 하한 500, 상한 60000.영어 원문 보기
Minimum milliseconds between requests. Default 1000, floor 500, ceiling 60000.WB_TIMEOUT_MSenv요청 1회당 제한 시간(밀리초)입니다. 기본값은 20000입니다.영어 원문 보기
Deadline for one request, in milliseconds. Default 20000.WB_MAX_RETRIESenv게이트웨이가 바쁘거나 속도 제한에 걸리면 재시도합니다. 기본값은 3입니다.영어 원문 보기
Retries on a busy or rate-limited gateway. Default 3.WB_CACHE_TTL_MSenv인메모리 캐시의 수명(밀리초). 기본값은 900000입니다. 0으로 설정하면 끕니다.영어 원문 보기
In-memory cache lifetime, in milliseconds. Default 900000. Set 0 to turn it off.WB_CACHE_MAX_ENTRIESenv인메모리 캐시 크기. 기본값은 200입니다.영어 원문 보기
In-memory cache size. Default 200.WB_LOG_LEVELenvsilent, error, info 또는 debug. 기본값은 error. 로그는 stderr로 출력됩니다.영어 원문 보기
silent, error, info or debug. Default error. Logs go to stderr.
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
한눈에 보기
- 주간 다운로드i
- 280/주
- 연결 방식
- 내 컴퓨터에서 실행
- 최신 버전i
- 2.2.0
- 레지스트리 공개i
- 2026년 10월 29일
- 코드 마지막 변경i
- 2026년 11월 16일
- 제작자
- smeet666
- 패키지
npm: mcp-wikibooks-cookbookmcpb: …/mcp-wikibooks-cookbook-2.2.0.mcpb- 웹사이트
- github.com
- 레지스트리 상태
- 활성
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 smeet666 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 3일 전
- ✓ 통과
라이선스 있음
MIT 사용
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
공개된 취약점 (OSV.dev)
OSV.dev에 mcp-wikibooks-cookbook@2.2.0 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/smeet666-mcp-wikibooks-cookbook)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
게임, 스포츠, 음식 및 학습 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 1611개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 1611개 중 56%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 1611개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
MCP Wikibooks Cookbook, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 3일 전 변경됐고, 최신 버전(2.2.0)은 21일 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, MCPB도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft, GoodWatch
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
WilmAI
Finland's Wilma school system for parents and students: schedule, homework, exams and messages.
Lumify Sports Intelligence
Schedules, scores, odds, splits & explainable AI bet confidence — 8+ sports, free instant key.
Savecraft
Savecraft serves real save game data and expert game knowledge to AI assistants.
GoodWatch
Find movies and TV shows, track watches, and get suggestions based on your taste.
| 이 항목 MCP Wikibooks Cookbook | Anime Garden | WilmAI | Lumify Sports Intelligence | Savecraft | GoodWatch | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 3/3 | 4/4 | 3/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | MIT | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
mcp-wikibooks-cookbook
The Cookbook is the recipe collection of the English Wikibooks, a Wikimedia project. Thousands of recipes are written and maintained there in the open, each with its ingredients, the equipment it calls for, its steps, the tips and variations its authors added, and the categories it files itself under: a cuisine, a kind of dish, a main ingredient. The pages are published under Creative Commons Attribution-ShareAlike 4.0.
This server connects a chat client to that collection. You can search the recipes by dish or by ingredient, list them by cuisine, kind of dish or main ingredient, read one with its ingredients rescaled to the number of people at your table, and rescale any ingredient list of your own. It needs no API key and no account.
_Version française_
Install
One-click install
Claude Code
claude mcp add wikibooks-cookbook -- npx -y mcp-wikibooks-cookbook
Claude Desktop, Cursor, and any client using the standard config format
{
"mcpServers": { "wikibooks-cookbook": { "command": "npx", "args": ["-y", "mcp-wikibooks-cookbook"] } } }
Node 24 or later is required, and no environment variable has to be set.
With Docker
{
"mcpServers": { "wikibooks-cookbook": { "command": "docker", "args": ["run", "-i", "--rm", "ghcr.io/smeet666/mcp-wikibooks-cookbook:2.2.0"] } } }
-i keeps stdin open, which is where the protocol travels, and -t is left out because a TTY rewrites the stream. The container needs outbound HTTPS to api.wikimedia.org, and nothing else: no volume, no port, no credential.
Bundle, without npm
Download mcp-wikibooks-cookbook-2.2.0.mcpb from the latest release and open it. A client that supports MCP bundles installs it on its own, with no npm and no configuration file to edit. The bundle carries its dependencies, so nothing is fetched at install time.
What you can ask
- "Find me a carbonara recipe in the Cookbook."
- "Read it for six people instead of four."
- "What Thai soups does the collection hold?"
- "Which recipes are built on lentils?"
- "Scale this ingredient list by 2.5 for me."
The ordinary path runs from a search to a reading: a row carries an id, the page key, and get_recipe takes that key.
Tools
| Tool | What it does |
|---|---|
search_recipes | Finds recipes by dish or by ingredient. |
get_recipe | Reads one recipe, rescaled to a number of servings on request. |
scale_ingredients | Rescales any ingredient list, with no request to the wiki. |
list_recipes | Lists recipes by cuisine, kind of dish or main ingredient. |
search_recipes
Searches the Cookbook, either across the whole text of its pages or across their titles alone.
| Argument | Type | Required | What it does |
|---|---|---|---|
query | string, 1 to 300 characters | yes | A dish, such as carbonara, or an ingredient, such as guanciale. |
search | text or title, default text | no | text reads the whole page; title matches the page name alone. |
limit | integer, 1 to 50, default 10 | no | Rows to serve. |
In return: rows carrying id, the page key get_recipe takes; title; url; image_url; description, the short gloss the wiki keeps for a page; and excerpt, the matching passage with the highlight markup taken off. Each of the last three is null where the search offered none. total_available is always null: the search route publishes no total and no paging, so result_count counts the rows this call returned.
get_recipe
Reads one recipe, and rescales its ingredients when a number of servings is given.
| Argument | Type | Required | What it does |
|---|---|---|---|
id | string, 1 to 300 characters | yes | The page key, such as Cookbook:Spaghetti_alla_Carbonara. |
servings | integer, 1 to 500 | no | Rescale the ingredients to this many servings. |
max_description_chars | integer, 100 to 20000, default 1200 | no | How much of the page's prose to serve. |
In return: title, url, ingredients, equipment, steps, tips for the notes and variations the page publishes, prep_minutes, cook_minutes, total_minutes, time_text in the page's own wording, time_phases, category and categories for every category the page files itself under. A figure the page states nothing for is null. id names the page that was read, which differs from the key asked for after a redirect, and redirected_from then names the key that led there. yield says what the recipe was written for and what it was rescaled to, and each ingredient carries scaling, reading scaled, rounded or unscaled.
scale_ingredients
Applies the same arithmetic to any list of ingredient lines, with no request to the wiki.
| Argument | Type | Required | What it does |
|---|---|---|---|
ingredients | array of 1 to 100 strings, up to 300 chars | yes | The lines to rescale. |
factor | number, above 0 and up to 100 | one of two | The multiplier to apply. |
from_servings | number, above 0 and up to 500 | one of two | How many servings the list is written for. |
to_servings | number, above 0 and up to 500 | one of two | How many servings are wanted. |
Pass factor, or the from_servings and to_servings pair.
In return: the factor used, the rescaled ingredients in the shape get_recipe returns, and scaled_count, rounded_count and unscaled_count.
list_recipes
Lists recipes along the categories the Cookbook files them under. The arguments combine, and the answer says which search was built from them.
| Argument | Type | Required | What it does |
|---|---|---|---|
cuisine | string, up to 80 characters | no | A cuisine or a country, such as Italian or Thai. |
dish_type | string, up to 80 characters | no | A kind of dish, such as soup, dessert or bread. |
main_ingredient | string, up to 80 characters | no | The ingredient a recipe is built on. |
limit | integer, 1 to 50, default 15 | no | Rows to serve. |
In return: the rows search_recipes returns, with query naming the search this server built from the arguments, and each argument echoed back or null where it was left out.
Rescaling the quantities
A quantity is stated in the unit that suits it, so a line can come back in a different unit from the one the recipe used: 200 g multiplied by twenty reads 4 kg.
How finely an ingredient can be divided depends on what it is. A loaf can be cut in two, in three or in four; an egg cannot be shared out. A quantity landing between the two is rounded, and the rescaled recipe then departs a little from the proportions of the original. The line carries rounded, and its note says what was done.
The figures are this server's arithmetic, so say they were recomputed when you show them. A recipe whose page states no number of servings cannot be put to a number of people, and the answer says so.
Licence and attribution
Cookbook pages are published under Creative Commons Attribution-ShareAlike 4.0. Repeating a recipe means crediting Wikibooks and the page it came from, and sharing what is built on it under the same licence. get_recipe returns both license and the page url, so an answer carries the credit with it.
Configuration
Every variable is optional. Set them in the env block of your client config.
| Variable | Default | What it does |
|---|---|---|
WB_USER_AGENT | the project identity | Names your application to Wikimedia, with an address where a person can be reached. |
WB_MIN_INTERVAL_MS | 1000 | Gap between two requests, from 500 to 60000. |
WB_TIMEOUT_MS | 20000 | Deadline for one request, from 1000 to 120000. |
| WB_MAX_RETRIES | 3 | Attempts after a transient failure, from 0 to 8.