할 수 있는 일
Yandex Metrica for AI agents: counters, goals, Reporting API and Logs API export over stdio.
제작자가 쓴 원문
- 연결 방식 내 컴퓨터에서 실행
- 계정 또는 키 YANDEX_METRICA_TOKEN 필요
- 분류 개발자 도구
함께 쓰기
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
andrej-karpathy-skills
A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.
graphify
Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Yandex Metrica MCP 설치해 줘. https://mcp.popnx.com/i/stufently-yandex-metrica-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
AI에게 설치 맡기기
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Yandex Metrica MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "yandex-metrica": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "YANDEX_METRICA_TOKEN", "ghcr.io/stufently/yandex-metrica-mcp:0.2.3" ], "env": { "YANDEX_METRICA_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) YANDEX_METRICA_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Yandex Metrica MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Yandex Metrica MCP에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
컴퓨터용 Claude 앱 설정 파일 열기
SettingsDeveloperEdit Config
이 설정을 붙여 넣고 저장
{ "mcpServers": { "yandex-metrica": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "YANDEX_METRICA_TOKEN", "ghcr.io/stufently/yandex-metrica-mcp:0.2.3" ], "env": { "YANDEX_METRICA_TOKEN": "your-value" } } } }키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Claude를 끄고 다시 열기
해 보기
Yandex Metrica MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Yandex Metrica MCP을 쓰고 있다고 하거나 답에 Yandex Metrica MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Yandex Metrica MCP에 연결할 수 없어요
Yandex Metrica MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · Yandex Metrica MCP에 연결되는 앱 쓰기
- Yandex Metrica MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
- Yandex Metrica MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
- Yandex Metrica MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
- Yandex Metrica MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
B · 개발자 도구에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
Yandex Metrica MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Yandex Metrica MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user yandex-metrica --env YANDEX_METRICA_TOKEN=your-value -- docker run -i --rm -e YANDEX_METRICA_TOKEN ghcr.io/stufently/yandex-metrica-mcp:0.2.3 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) YANDEX_METRICA_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Yandex Metrica MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Yandex Metrica MCP에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
터미널 열기
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
이 명령을 붙여 넣고 Enter
claude mcp add --scope user yandex-metrica --env YANDEX_METRICA_TOKEN=your-value -- docker run -i --rm -e YANDEX_METRICA_TOKEN ghcr.io/stufently/yandex-metrica-mcp:0.2.3Enter 전에 “your-value”를 내 키로 바꾸세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Claude Code에서 /mcp 입력
Yandex Metrica MCP이 목록에 있고 연결됨으로 보이면 돼요
해 보기
Yandex Metrica MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Yandex Metrica MCP을 쓰고 있다고 하거나 답에 Yandex Metrica MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
Yandex Metrica MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Yandex Metrica MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "yandex-metrica": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "YANDEX_METRICA_TOKEN", "ghcr.io/stufently/yandex-metrica-mcp:0.2.3" ], "env": { "YANDEX_METRICA_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) YANDEX_METRICA_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Yandex Metrica MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Yandex Metrica MCP에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 입력
Yandex Metrica MCP 설정에서 YANDEX_METRICA_TOKEN가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Cursor에서 AI 채팅을 Agent 모드로 열기
해 보기
Yandex Metrica MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Yandex Metrica MCP을 쓰고 있다고 하거나 답에 Yandex Metrica MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
Yandex Metrica MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Yandex Metrica MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "yandex-metrica": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "YANDEX_METRICA_TOKEN", "ghcr.io/stufently/yandex-metrica-mcp:0.2.3" ], "env": { "YANDEX_METRICA_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) YANDEX_METRICA_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Yandex Metrica MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Yandex Metrica MCP에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 입력
Yandex Metrica MCP 설정에서 YANDEX_METRICA_TOKEN가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
VS Code에서 AI 채팅을 Agent 모드로 열기
해 보기
Yandex Metrica MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Yandex Metrica MCP을 쓰고 있다고 하거나 답에 Yandex Metrica MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
개발자용: 터미널 명령과 JSON 설정
컴퓨터에 설치
Claude Code
claude mcp add --scope user yandex-metrica --env YANDEX_METRICA_TOKEN=your-value -- docker run -i --rm -e YANDEX_METRICA_TOKEN ghcr.io/stufently/yandex-metrica-mcp:0.2.3Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"yandex-metrica": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"YANDEX_METRICA_TOKEN",
"ghcr.io/stufently/yandex-metrica-mcp:0.2.3"
],
"env": {
"YANDEX_METRICA_TOKEN": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"yandex-metrica": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"YANDEX_METRICA_TOKEN",
"ghcr.io/stufently/yandex-metrica-mcp:0.2.3"
],
"env": {
"YANDEX_METRICA_TOKEN": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"yandex-metrica": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"YANDEX_METRICA_TOKEN",
"ghcr.io/stufently/yandex-metrica-mcp:0.2.3"
],
"env": {
"YANDEX_METRICA_TOKEN": "your-value"
}
}
}
}직접 입력할 값
YANDEX_METRICA_TOKEN비밀 필수 env
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
한눈에 보기
- 주간 다운로드i
- npm/PyPI에 없음
- 연결 방식
- 내 컴퓨터에서 실행
- 최신 버전i
- 0.2.3
- 레지스트리 공개i
- 2026년 10월 14일
- 코드 마지막 변경i
- 2026년 11월 14일
- 제작자
- stufently
- 패키지
oci: ghcr.io/stufently/yandex-metrica-mcp:0.2.3- 웹사이트
- github.com
- 레지스트리 상태
- 활성
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 stufently 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 6일 전
- ✓ 통과
라이선스 있음
MIT 사용
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/stufently-yandex-metrica-mcp)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
개발자 도구 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 6209개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 6209개 중 46%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 6209개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
Yandex Metrica MCP, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
입력해야 할 값: YANDEX_METRICA_TOKEN
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 6일 전 변경됐고, 최신 버전(0.2.3)은 37일 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| 이 항목 Yandex Metrica MCP | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 |
| 키 필요 | 예 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| 라이선스 | MIT | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
yandex-metrica-mcp
MCP server for the Yandex Metrica Reporting API, Logs API and counter management, designed for use with Claude Code and Codex CLI. Eight of its 13 tools only read; five change your Metrica account — create and delete a counter, and create, cancel and clean a Logs API export. Each tool says which it is in its MCP annotations (readOnlyHint, destructiveHint).
Runs locally over stdio. No web server, no persistent storage, no background daemons.
Why this project exists
Yandex Metrica has two distinct APIs that serve different purposes:
- Reporting API (
/stat/v1/data) — aggregated, sampled statistics. Use this to build reports, query traffic sources, behavior metrics, goal conversions, etc. - Logs API (
/management/v1/counter/{id}/logrequests) — raw, non-aggregated event export. Use this when you need row-level session or hit data for custom analytics pipelines.
This MCP server exposes both APIs as named tools that an LLM can call directly.
Features
- 13 MCP tools covering counter management, goals, reporting, and full Logs API lifecycle
- Authentication via environment variable only (no interactive OAuth)
- Minimal transformation — responses stay close to the Yandex API format
- Safe download behavior: logs parts default to 50KB preview + metadata
- Strict TypeScript, zod validation, clean error messages
- Multi-stage Docker image (node:24-alpine)
- Unit + mock integration tests, live test scaffolding
- GitHub Actions CI and Docker workflows
Supported MCP Tools
Counter Management
| Tool | Description |
|---|---|
yandex_metrica_list_counters | List accessible counters (tags) |
yandex_metrica_get_counter | Get counter details by ID |
yandex_metrica_list_goals | List goals for a counter |
yandex_metrica_create_counter | Create a new counter (add a site) |
yandex_metrica_delete_counter | Delete a counter permanently |
Reporting API (aggregated)
| Tool | Description |
|---|---|
yandex_metrica_get_report | Run a Reporting API query |
For period comparison, pass
date1_b/date2_btoyandex_metrica_get_report. The tool automatically routes to/stat/v1/data/comparison;date1/date2become segment A,date1_b/date2_bbecome segment B. Each result row returnsmetrics: { a, b }.
Logs API (raw export)
| Tool | Description |
|---|---|
yandex_metrica_evaluate_logs_request | Check if export is possible |
yandex_metrica_create_logs_request | Create an async export request |
yandex_metrica_list_logs_requests | List all requests for a counter |
yandex_metrica_get_logs_request | Poll status of a request |
yandex_metrica_download_logs_part | Download a processed part (TSV) |
yandex_metrica_cancel_logs_request | Cancel a pending request |
yandex_metrica_clean_logs_request | Clean processed files to free quota |
Logs API Workflow
evaluate → create → [poll get until status=processed] → download parts → clean
The Logs API is asynchronous. After creating a request, poll yandex_metrica_get_logs_request until status = "processed", then download each part listed in log_request.parts (by its part_number).
Download Behavior
Raw log parts can be hundreds of MB. By default yandex_metrica_download_logs_part returns:
{
"mode": "preview", "truncated": true, "original_byte_size": 52428800, "preview_byte_size": 49980, "content": "ym:s:visitID\tym:s:date\t...\n..." }
Set mode: "full" to get the entire content — only do this for small parts.
Requirements
- Node.js 24+
- Yandex OAuth token with
metrika:readscope
How to get YANDEX_METRICA_TOKEN
- Go to https://oauth.yandex.com/ → Create app
- Fill in any name, select For API access
- Under Access → enable
metrika:read - Click Create app, copy the ClientID
- Open in browser (replace
with yours):
https://oauth.yandex.com/authorize?response_type=token&client_id=<ClientID>
- Authorize → copy the
access_tokenfrom the URL fragment (#access_token=...)
How to get YANDEX_METRICA_COUNTER_ID
The counter ID is the numeric ID of your Yandex Metrica tag (счётчик):
- Open https://metrika.yandex.ru — the counter ID is shown next to each tag
- Or look at the URL:
metrika.yandex.ru/dashboard?id=**12345678** - Or use the tool itself: call
yandex_metrica_list_counters— it returns all counters with their IDs
YANDEX_METRICA_COUNTER_IDis only needed for live tests (npm run test:live), not for normal server operation.
Installation
docker run -i --rm -e YANDEX_METRICA_TOKEN ghcr.io/stufently/yandex-metrica-mcp:latest
One path that works today: Docker. Nothing to clone, no Node.js. Every MCP client below starts the server with this same command.
-e YANDEX_METRICA_TOKEN without a value forwards the variable from the client's environment into the container, so the token lives in the client's env block and never appears in the docker command line or ps output. The client pulls the image on first start; docker pull ghcr.io/stufently/yandex-metrica-mcp:latest up front just makes that first start faster.
Smoke test without a token or network — the server must answer initialize and list 13 tools. The image ships a placeholder YANDEX_METRICA_TOKEN so it starts for introspection; tool calls with it return a "YANDEX_METRICA_TOKEN is not set" error instead of reaching Yandex:
printf '%s\n' \
'{"jsonrpc":"2.0","id":1,"method":"initialize","params":{"protocolVersion":"2025-06-18","capabilities":{},"clientInfo":{"name":"smoke","version":"0"}}}' \ '{"jsonrpc":"2.0","method":"notifications/initialized"}' \ '{"jsonrpc":"2.0","id":2,"method":"tools/list"}' \ | docker run -i --rm --network none ghcr.io/stufently/yandex-metrica-mcp:latest
Image tags on GHCR: latest and main (every push to main), sha- , and X.Y.Z / X.Y / X on version tags. Pin a version tag (:0.2.3) for reproducible setups.
npm (not published yet)
The package is scoped — both unscoped names (yandex-metrica-mcp and the project's former name mcp-yandex-metrica) belong to unrelated projects on npm — so it ships as @stufently/yandex-metrica-mcp (command yandex-metrica-mcp). The first npm release has not been cut, so npx -y @stufently/yandex-metrica-mcp does not work today. Use Docker.
From source
git clone https://github.com/stufently/yandex-metrica-mcp.git
cd yandex-metrica-mcp npm install && npm run build
See Running from a local build for the client config.
Configuration
Copy .env.example to .env and set your token:
cp .env.example .env
| Variable | Required | Default | Description |
|---|---|---|---|
YANDEX_METRICA_TOKEN | Yes | — | OAuth token with metrika:read |
YANDEX_METRICA_TIMEOUT_MS | No | 30000 | Request timeout in ms |
LOG_LEVEL | No | info | Log level: debug, info, warn, error, silent |
YANDEX_METRICA_USER_AGENT | No | yandex-metrica-mcp/0.2.3 | Custom User-Agent |
YANDEX_METRICA_BASE_URL | No | https://api-metrika.yandex.net | API base URL (tests only) |
Local Development
# Development with hot reload
YANDEX_METRICA_TOKEN=your_token npm run dev
Build
npm run build
Run production build
YANDEX_METRICA_TOKEN=your_token npm start
Lint
npm run lint
Type check
npm run typecheck
Tests (unit + mock integration, no live API calls)
npm test
Live tests (requires real token and counter ID)
LIVE_TESTS=1 YANDEX_METRICA_TOKEN=your_token YANDEX_METRICA_COUNTER_ID=12345678 npm run test:live
Format
npm run format
Docker
# Use pre-built image from GHCR (updated on every push to main)
docker run -i --rm \ -e YANDEX_METRICA_TOKEN=your_token \ ghcr.io/stufently/yandex-metrica-mcp:latest
Or build locally
docker build -t yandex-metrica-mcp:local . docker run -i --rm \ -e YANDEX_METRICA_TOKEN=your_token \ yandex-metrica-mcp:local
Docker Compose
# Create .env with your token first
cp .env.example .env
Run
docker-compose run --rm yandex-metrica-mcp
Verified clients and platforms
Only what has actually been run is listed as verified. Everything else in Client Configuration is a documented config that nobody has checked end to end.
| Client / runtime | OS | How it runs | Status | Evidence |
|---|---|---|---|---|
| Claude Code 2.1 | Ubuntu 26.04 LTS, x86_64 | Docker image built locally from this repo, stdio | Verified | Daily use on the maintainer's host (counters, reports, goals) |
| Node.js 24 | Ubuntu (ubuntu-latest) | npm ci, lint, typecheck, unit + mock integration tests, build | Verified in CI | ci.yml |
| Docker image | Ubuntu (ubuntu-latest) | Image build on every pull request and push to main | Built in CI, not started there | docker.yml |
Claude Desktop (.mcpb) | macOS, Windows | Desktop Extension | Not verified | Bundle is built in CI, never installed in a real Desktop |
| Cursor, Windsurf, Codex CLI, Zed | any | Configs below | Not verified | Documented only |
| macOS, Windows | — | Any client | Not verified | No CI runner on these systems |
Client Configuration
All configs below are copy-paste ready and use the Docker command from Installation. Replace your_oauth_token_here with your Yandex OAuth token and nothing else.
Claude Code
Project file: .mcp.json in the project root.
claude mcp add yandex-metrica \
-e YANDEX_METRICA_TOKEN=your_oauth_token_here \ -- docker run -i --rm -e YANDEX_METRICA_TOKEN ghcr.io/stufently/yandex-metrica-mcp:latest
Add --scope user to make it available in every project, or --scope project to write .mcp.json. Check with claude mcp list / claude mcp get yandex-metrica.
The same server as JSON in .mcp.json:
{
"mcpServers": { "yandex-metrica": { "command": "docker", "args": [ "run", "-i", "--rm", "-e",