What it does
Drive Suresoft STATIC analysis from a coding agent: connect, analyze, upload, manage rulesets.
- Connects 내 컴퓨터에서 실행
- Account or key No key needed
- Category 개발자 도구
함께 쓰기
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
andrej-karpathy-skills
A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.
graphify
Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 4/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 16/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
검사 3/3 통과 · 내 컴퓨터에서 실행돼요
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기
해 보기
STATICA STATIC analysis tools을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 STATICA STATIC analysis tools을 쓰고 있다고 하거나 답에 STATICA STATIC analysis tools 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 STATICA STATIC analysis tools에 연결할 수 없어요
STATICA STATIC analysis tools는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · STATICA STATIC analysis tools에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
B · 개발자 도구에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
Claude Code는 아직 STATICA STATIC analysis tools에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
대신 이렇게 할 수 있어요
A · STATICA STATIC analysis tools에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
Cursor는 아직 STATICA STATIC analysis tools에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
대신 이렇게 할 수 있어요
A · STATICA STATIC analysis tools에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
VS Code는 아직 STATICA STATIC analysis tools에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
대신 이렇게 할 수 있어요
A · STATICA STATIC analysis tools에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
한눈에 보기
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 SuresoftTechnologies 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 9일 전
- ✓ 통과
라이선스 있음
MIT 사용
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/suresofttechnologies-statica-mcp)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
개발자 도구 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 6116개 중 69%보다 스타가 많아요
- 이 카테고리의 다른 서버 6116개 중 81%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 6116개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
STATICA STATIC analysis tools, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 9일 전 변경됐고, 최신 버전(0.1.0)은 9일 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| 이 항목 STATICA STATIC analysis tools | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| 라이선스 | MIT | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
STATICA — AI Agent for STATIC Static Analysis
한국어: README.ko.md
STATICA (STATIC AI Agent) is an AI agent that lets you use STATIC static analysis in coding agents such as Claude Code, Codex CLI, Cursor, and GitHub Copilot. Whenever code changes during a coding session, STATICA re-analyzes only the changed files and reports the result, so your STATIC workspace stays current without a full rebuild. It also connects new projects to STATIC, manages the STATIC server project, and corrects C/C++ analysis configuration when STATIC can't analyze a file.
STATIC is a static analysis tool that detects coding rule violations, runtime errors, and potential security vulnerabilities without executing the source code. It also provides domain-specific coding rule sets and software quality metrics.
STATICA does not replace STATIC's analysis results. STATIC performs the analysis and produces the findings; STATICA prepares, runs, and reports that analysis from inside the coding session. STATICA reports the state of the analysis, such as defect counts by rule, and does not edit source code to fix defects.
What STATIC and STATICA add
| Need | STATIC and STATICA workflow |
|---|---|
| Keep analysis current while coding | Analyzes only the changed files and posts a one-line [STATIC] summary with defect counts by rule. A Stop hook runs it automatically. |
| Check on demand | /statica:pre-analyze analyzes the changed files and summarizes defects without uploading. |
| Share results with the team | /statica:upload analyzes the whole project and creates a revision on the STATIC server, only when you ask. |
| Connect a new project | A guided bootstrap identifies the build environment and compiler, captures the build, and registers the project on the server. |
| Correct analysis errors | For C/C++ files STATIC couldn't analyze, verifies a parser configuration fix on copies, then applies it to the STATIC wrapper. |
| Manage the server project | View and change rulesets, code metrics, exclusions, and report generation; generate and download reports. |
Workflow at a glance
- Run
/statica:pre-analyzein a project. If it isn't connected to STATIC yet, the coding agent explains the bootstrap and asks for your approval before starting. - Work as usual. After each response that changed analyzable sources, the Stop hook analyzes them within a time budget and reports defect counts by rule.
- When the team should see the result, run
/statica:upload. - Adjust rulesets, metrics, exclusions, and reports with the setting skills, or check
/statica:status.
The skills in this repository work with a STATIC installation. They are not a replacement for STATIC.
Install
Add STATICA from Anthropic's plugin directory on claude.ai (Customize > Plugins). It loads in Claude Code through account sync. To try a local copy without installing, load it for one session from the folder that contains your checkout:
claude --plugin-dir ./statica-plugin
Start a new session after installing, and approve the Stop hook in /hooks if asked; automatic analysis needs it.
Its scripts and Stop hook run on your machine against a local STATIC installation. Without STATIC, or when its settings are missing, a command stops at its setup check and says what is missing, and the Stop hook stays silent. Run /statica:status to see the connection, automatic-analysis switch, and server state at once.
Example requests
Responses can vary with the AI model and the conversation. If the result isn't what you expected, rephrase the request with more detail.
| Request | Skill |
|---|---|
Analyze what I just changed with STATIC. | pre-analyze |
Connect this project to STATIC. | statica-analyze-bootstrap |
Upload the full analysis to the STATIC server. | upload |
Exclude the third_party folder from analysis. | scope |
Generate a STATIC report and download it. | report |
This C file fails to analyze. Fix the toolchain settings. | statica-toolchain-recovery |
Skills
All skills need a STATIC installation for their product-backed actions.
| Skill | Workflow stage |
|---|---|
statica-analyze-overview | Explain the plugin's scope, entry points, and prerequisites. |
statica-analyze-bootstrap | Connect a project to a STATIC workspace for the first time. |
pre-analyze | Analyze changed sources and summarize, without uploading. |
upload | Analyze the whole project and upload it to the STATIC server. |
status | Show the project's STATIC state at a glance. |
analyze-on / analyze-off | Turn automatic analysis after each response on or off for the project. |
ruleset | Change the project's ruleset and rule display language. |
scope | Exclude files, directories, or build modules from analysis. |
metric | Turn individual code metrics on or off. |
report / report-generator | Generate and download reports; set automatic report generation. |
statica-toolchain-recovery | Verify and apply C/C++ parser configuration fixes. |
Ruleset, metric, exclusion, and report settings belong to the server project, so changes apply to everyone who uses that project.
MCP server
STATICA also ships an MCP server that exposes the same actions to any MCP client — Claude Desktop, Cursor, VS Code, and others — not only to agents that load the skills. A client with no skills still gets the full flow: connect a project, analyze, upload, and manage the server project. The procedure the skills follow is served back through a tool (statica_get_guide), so a skill-less client has the same guidance to work from.
It is listed in the official MCP registry as io.github.SuresoftTechnologies/statica-mcp.
Three ways to run it:
- With the plugin. Installing STATICA registers the server automatically (
.mcp.json), so in Claude Code the tools are available alongside the skills. - As a bundle. Download
statica-mcp.mcpbfrom this repository's releases and open it with a client that installs MCP bundles. It resolves its own Python, so nothing has to be installed first. - Point a client at the interpreter. Run
scripts/mcp_server.pywith Python 3.10 or later. The launcherscripts/statica-mcp.cmdpicks a working interpreter on Windows and Linux.
The tools mirror the skills:
| Group | Tools |
|---|---|
| Read-only | statica_doctor, statica_status, statica_scope_show, statica_ruleset_show, statica_metric_show, statica_report_generator_show, statica_get_guide |
| Analyze and report | statica_pre_analyze, statica_report, statica_upload, statica_set_auto_analysis |
| Server-project settings | statica_scope_exclude / _include / _skip_module / _unskip_module, statica_ruleset_set, statica_metric_set, statica_report_generator_set |
| Connect a project | statica_bootstrap_detect, _begin, _guard, _verify, _finish, _abort |
Two prompts, connect-project and upload-analysis, start the guided flows. Connecting a project and uploading a full analysis change project files or the shared server, so they carry consent hints and ask for your approval first; read statica_get_guide before connecting. Without STATIC the server still starts and statica_doctor reports what is missing, so it is safe to leave configured on any machine.
The bundle reads the STATIC installation from ARACHNE_INSTALL_PATH. When that is not already set on the machine, supply the path through the bundle's STATICA_INSTALL_PATH configuration; an empty value leaves the machine's own setting untouched.
Product-backed workflow
This repository contains the skills, a Stop hook, an MCP server, and Python scripts that drive a local STATIC installation. It does not include STATIC itself. What runs on your machine:
- Stop hook. Runs at the end of every response. It exits within a fraction of a second unless the project is connected to STATIC, automatic analysis is on, and analyzable files changed. It never uploads, never blocks your turn, and always exits successfully.
- Analysis. Runs STATIC's own analyzers and stores results in the STATIC workspace.
- Project files. Connecting a C/C++ project changes its build settings so STATIC can capture the build, only after you approve. Originals are backed up first and the change can be reverted. Java, Kotlin, Python, and C# projects are not modified.
- Network. Connects only to the STATIC server configured in your STATIC installation, over HTTPS with your AccessKey. Certificate verification is disabled for this connection because STATIC servers commonly use self-signed certificates on internal networks. Analysis results leave your machine only when you run
/statica:uploador finish bootstrap. - Credentials. Reads the server URL and AccessKey from STATIC's own settings (
conf/server.setting.json). Never asks for or stores the AccessKey. - Local state. The automatic-analysis switch is stored in
~/.suresoft/data/plugins/static/state.json.
Requirements
- STATIC installed and licensed, with
ARACHNE_INSTALL_PATHpointing to the installation - The STATIC server URL and AccessKey registered in STATIC's settings
- Python 3.10 or later as
python3orpythononPATH - Windows or Linux
For a product demo, purchase, or deployment consultation, contact bizcenter@suresofttech.com.
Privacy Policy
- STATICA sends nothing to Suresoft Technologies and has no telemetry. The MCP server has none of its own either; it forwards each call to the local runtime and makes no network call of its own.
- It sends requests only to the STATIC server configured in your STATIC installation, and uploads analysis results only when you ask.
- Its output, such as defect counts and file paths, appears in your coding agent session and is sent to the AI model provider by your coding agent client.
The full policy is in PRIVACY.md. For support and questions, contact bizcenter@suresofttech.com.
License and trademarks
This repository is licensed under the MIT License. The license covers everything in this repository: the documentation, the skill files, the hook, and the scripts. It does not cover STATIC itself. STATIC and STATICA are Suresoft Technologies products, and no product functionality or product license is granted by this repository.
Claude and Claude Code are trademarks of Anthropic. Other product names may be trademarks of their respective owners.