프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Apple Books

제작자: vgnshiyer버전 0.9.0i★ 64i내 컴퓨터에서 실행공식 사이트 ↗
레지스트리 이름io.github.vgnshiyer/apple-books-mcp

설치 방법

What it does

Access your Apple Books library, annotations, reading progress, and highlights through Claude

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 게임, 스포츠, 음식 및 학습

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기22/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수34/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Apple Books 설치해 줘. https://mcp.popnx.com/i/vgnshiyer-apple-books-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    Apple Books을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Apple Books을 쓰고 있다고 하거나 답에 Apple Books 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • APPLE_BOOKS_MCP_ENABLE_WRITES 컬렉션 쓰기 도구(컬렉션 생성, 이름 변경, 삭제; 책 추가 및 제거)를 허용합니다. Books가 열려 있으면 쓰기를 거부하며, 먼저 백업을 만듭니다.
    영어 원문 보기Allow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 기본값 false
  • APPLE_BOOKS_DATA_DIR Apple Books 저장소(BKLibrary 및 AEAnnotation)가 들어 있는 폴더이며, /Library/Containers/com.apple.iBooksX/Data/Documents가 아닌 경우에 사용
    영어 원문 보기Folder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 동시에 실행할 수 있는 도구 호출 수(기본값 8; 0이면 이벤트 루프에서 하나씩 실행)
    영어 원문 보기How many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 기본값 8
  • APPLE_BOOKS_QUERY_TIMEOUT 라이브러리 쿼리가 중지되기 전까지 실행될 수 있는 시간(초)(기본값 30; 제한 없음은 0).
    영어 원문 보기Seconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 기본값 30

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Apple Books에 연결할 수 없어요

Apple Books는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Apple Books에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 게임, 스포츠, 음식 및 학습에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Apple Books을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user apple-books -- uvx apple-books-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Apple Books의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user apple-books -- uvx apple-books-mcp
  4. Claude Code에서 /mcp 입력

    Apple Books이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Apple Books을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Apple Books을 쓰고 있다고 하거나 답에 Apple Books 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • APPLE_BOOKS_MCP_ENABLE_WRITES 컬렉션 쓰기 도구(컬렉션 생성, 이름 변경, 삭제; 책 추가 및 제거)를 허용합니다. Books가 열려 있으면 쓰기를 거부하며, 먼저 백업을 만듭니다.
    영어 원문 보기Allow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 기본값 false
  • APPLE_BOOKS_DATA_DIR Apple Books 저장소(BKLibrary 및 AEAnnotation)가 들어 있는 폴더이며, /Library/Containers/com.apple.iBooksX/Data/Documents가 아닌 경우에 사용
    영어 원문 보기Folder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 동시에 실행할 수 있는 도구 호출 수(기본값 8; 0이면 이벤트 루프에서 하나씩 실행)
    영어 원문 보기How many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 기본값 8
  • APPLE_BOOKS_QUERY_TIMEOUT 라이브러리 쿼리가 중지되기 전까지 실행될 수 있는 시간(초)(기본값 30; 제한 없음은 0).
    영어 원문 보기Seconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 기본값 30

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Apple Books을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "apple-books": { "command": "uvx", "args": [ "apple-books-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Apple Books의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Apple Books을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Apple Books을 쓰고 있다고 하거나 답에 Apple Books 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • APPLE_BOOKS_MCP_ENABLE_WRITES 컬렉션 쓰기 도구(컬렉션 생성, 이름 변경, 삭제; 책 추가 및 제거)를 허용합니다. Books가 열려 있으면 쓰기를 거부하며, 먼저 백업을 만듭니다.
    영어 원문 보기Allow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 기본값 false
  • APPLE_BOOKS_DATA_DIR Apple Books 저장소(BKLibrary 및 AEAnnotation)가 들어 있는 폴더이며, /Library/Containers/com.apple.iBooksX/Data/Documents가 아닌 경우에 사용
    영어 원문 보기Folder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 동시에 실행할 수 있는 도구 호출 수(기본값 8; 0이면 이벤트 루프에서 하나씩 실행)
    영어 원문 보기How many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 기본값 8
  • APPLE_BOOKS_QUERY_TIMEOUT 라이브러리 쿼리가 중지되기 전까지 실행될 수 있는 시간(초)(기본값 30; 제한 없음은 0).
    영어 원문 보기Seconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 기본값 30

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Apple Books을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "apple-books": { "type": "stdio", "command": "uvx", "args": [ "apple-books-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Apple Books의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Apple Books을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Apple Books을 쓰고 있다고 하거나 답에 Apple Books 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • APPLE_BOOKS_MCP_ENABLE_WRITES 컬렉션 쓰기 도구(컬렉션 생성, 이름 변경, 삭제; 책 추가 및 제거)를 허용합니다. Books가 열려 있으면 쓰기를 거부하며, 먼저 백업을 만듭니다.
    영어 원문 보기Allow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
    · 기본값 false
  • APPLE_BOOKS_DATA_DIR Apple Books 저장소(BKLibrary 및 AEAnnotation)가 들어 있는 폴더이며, /Library/Containers/com.apple.iBooksX/Data/Documents가 아닌 경우에 사용
    영어 원문 보기Folder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS 동시에 실행할 수 있는 도구 호출 수(기본값 8; 0이면 이벤트 루프에서 하나씩 실행)
    영어 원문 보기How many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
    · 기본값 8
  • APPLE_BOOKS_QUERY_TIMEOUT 라이브러리 쿼리가 중지되기 전까지 실행될 수 있는 시간(초)(기본값 30; 제한 없음은 0).
    영어 원문 보기Seconds a library query may run before it is stopped (default 30; 0 for no limit).
    · 기본값 30

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Apple Books을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user apple-books -- uvx apple-books-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "apple-books": {
      "command": "uvx",
      "args": [
        "apple-books-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "apple-books": {
      "command": "uvx",
      "args": [
        "apple-books-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "apple-books": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "apple-books-mcp"
      ]
    }
  }
}

직접 입력할 값

  • APPLE_BOOKS_MCP_ENABLE_WRITES env
    컬렉션 쓰기 도구(컬렉션 생성, 이름 변경, 삭제; 책 추가 및 제거)를 허용합니다. Books가 열려 있으면 쓰기를 거부하며, 먼저 백업을 만듭니다.
    영어 원문 보기Allow the collection write tools (create, rename and delete collections; add and remove books). Writes refuse to run while Books is open and take a backup first.
  • APPLE_BOOKS_DATA_DIR env
    Apple Books 저장소(BKLibrary 및 AEAnnotation)가 들어 있는 폴더이며, /Library/Containers/com.apple.iBooksX/Data/Documents가 아닌 경우에 사용
    영어 원문 보기Folder holding the Apple Books stores (BKLibrary and AEAnnotation), if not ~/Library/Containers/com.apple.iBooksX/Data/Documents.
  • APPLE_BOOKS_MCP_THREADS env
    동시에 실행할 수 있는 도구 호출 수(기본값 8; 0이면 이벤트 루프에서 하나씩 실행)
    영어 원문 보기How many tool calls may run at once (default 8; 0 runs them one at a time on the event loop).
  • APPLE_BOOKS_QUERY_TIMEOUT env
    라이브러리 쿼리가 중지되기 전까지 실행될 수 있는 시간(초)(기본값 30; 제한 없음은 0).
    영어 원문 보기Seconds a library query may run before it is stopped (default 30; 0 for no limit).

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
264/주
라이선스i
Apache-2.0
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.9.0
레지스트리 공개i
2026년 10월 1일
코드 마지막 변경i
2026년 11월 14일
제작자
vgnshiyer
패키지
pypi: apple-books-mcp
mcpb: …/apple-books-mcp-0.9.0.mcpb
웹사이트
vgnshiyer.me
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 vgnshiyer 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 5일 전

  • ✓ 통과

    라이선스 있음

    Apache-2.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 apple-books-mcp@0.9.0 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/vgnshiyer-apple-books-mcp.svg)](https://mcp.popnx.com/en/servers/vgnshiyer-apple-books-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

게임, 스포츠, 음식 및 학습 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1614개 중 98%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1614개 중 31%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1614개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Apple Books, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 5일 전 변경됐고, 최신 버전(0.9.0)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv), MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft, GoodWatch

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

WilmAI

Finland's Wilma school system for parents and students: schedule, homework, exams and messages.

제작자: aikarjal성장 중↓ 1.4천/주★ 89 저장소 전체의 별10일 전 업데이트

내 컴퓨터에서 실행✓ 서비스 회사 · wilm.ai

Savecraft

Savecraft serves real save game data and expert game knowledge to AI assistants.

제작자: joshsymonds초기★ 137개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ 서비스 회사 · savecraft.gg

GoodWatch

Find movies and TV shows, track watches, and get suggestions based on your taste.

제작자: alp82초기★ 50 저장소 전체의 별30일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · goodwatch.app
비슷한 항목과 비교
이 항목
Apple Books
Anime GardenWilmAILumify Sports IntelligenceSavecraftGoodWatch
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요예아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/43/34/43/44/4
라이선스Apache-2.0AGPL-3.0MITMITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Apple Books MCP

Model Context Protocol (MCP) server for Apple Books.

At a glance

  • Pick up where you left off — Claude sees the book you're reading, your progress and the chapter you're on, and pulls that chapter's text (chapter_id="current") and your highlights when it needs them.
  • Find any book — by title or author, ignoring case, accents and curly quotes, with a link that opens it in Apple Books.
  • Expand on any highlight — get the surrounding paragraph explained in context, with the exact anchor you marked shown in «...».
  • Revisit a book — pull your highlights, cluster them by theme, and quote you back to yourself.
  • Reflect on your reading — patterns across books, recurring ideas in your highlights, what you're actually drawn to.

https://github.com/user-attachments/assets/77a5a29b-bfd7-4275-a4af-8d6c51a4527e

And much more!

Available Tools

List and search tools return one page at a time: 50 annotations or 200 books by default, limit between 1 and 500, and offset for the next page. When there is more, the output says so and names the next offset.

How results work:

  • Ids are integers: every row starts with one, as in [175] Title by Author, to pass on as book_id, annotation_id or collection_id. A numeric string such as "175" is accepted too; true, false and fractions are not ids.
  • A failure (an unknown id, a book that isn't downloaded, a bad color) comes back as an MCP error (isError) whose message names what to do next, often another tool to call. An empty result ("No books matched …") is a normal answer, not an error.
  • Text taken from your books (chapter text, the passage around a highlight, a table of contents, a book's description) is wrapped in … . The server's instructions tell Claude that this text is untrusted data from the book, never instructions to follow.
  • Highlights from books you've removed from the library are kept by Apple Books. They are shown per removed book, as "Removed book (asset 3F2A1B2C…)", after the books still in your library.
Collections
ToolDescriptionParameters
list_all_collectionsList all collectionslimit?: int (default: 200), offset?: int
get_collection_booksGet all books in a collectioncollection_id: int
describe_collectionGet details of a collectioncollection_id: int
search_collections_by_titleSearch for collections by titletitle: str
Editing collections (opt-in)

Off by default. Enable by adding --enable-writes to the server args:

"args": ["apple-books-mcp", "--enable-writes"]

With the Claude Desktop extension, turn on Allow editing collections in the extension's settings instead.

Apple provides no automation API for collections, so these write directly to the library database — behind guard rails: every write refuses while Books is open, takes an automatic WAL-safe backup first (~/.py_apple_books/backups/), validates the schema and aborts on drift, and only touches user-created collections (plus "Want to Read" membership). Deleting a collection never deletes the books in it.

⚠️ If iCloud sync for collections is enabled, direct edits may not propagate to other devices and can be reverted by a cloud re-sync.

ToolDescriptionParameters
create_collectionCreate a new collectiontitle: str, details?: str
rename_collectionRename a user-created collectioncollection_id: int, new_title: str
delete_collectionDelete a user-created collection (books untouched)collection_id: int
add_book_to_collectionAdd a book to a collection (idempotent)collection_id: int, book_id: int
remove_book_from_collectionRemove a book from a collection (idempotent)collection_id: int, book_id: int
Books
ToolDescriptionParameters
list_all_booksList all bookslimit?: int (default: 200), offset?: int
search_booksFind books whose title or author contains the query, ignoring case, accents and quote/dash stylequery: str, limit?: int (default: 200), offset?: int
search_books_by_titleSearch for books by title (same matching, titles only)title: str, limit?: int (default: 200), offset?: int
describe_bookGet details of a particular book (metadata, progress, annotation count, description), whether its text is readable (see below) and an "Open in Books" linkbook_id: int
list_annotationsAnnotations for a book in reading order (id + text + chapter per row, with your notes)book_id: int, limit?: int (default: 50), offset?: int
get_books_by_genreGet books by genre (substring match)genre: str, limit?: int (default: 200), offset?: int

describe_book has a Readable text line saying whether the chapter tools can read the book, and if not why: yes (EPUB), a PDF, DRM-protected, not downloaded (in iCloud only, an Apple Books Store title, or never downloaded) or a missing file. It is worked out from the library's records and file metadata, without opening the book: reading a file that is only in iCloud would make macOS download it.

Open in Books links (ibooks://assetid/…) open the book in Apple Books. They appear in describe_book, describe_annotation, get_current_reading_position and the Currently Reading resource.

Reading Status
ToolDescriptionParameters
get_books_in_progressGet books currently being readlimit?: int (default: 200), offset?: int
get_finished_booksGet books that have been finishedlimit?: int (default: 200), offset?: int
get_unstarted_booksGet books not yet startedlimit?: int (default: 200), offset?: int
get_recently_read_booksGet the most recently read bookslimit?: int (default: 10), offset?: int
Annotations
ToolDescriptionParameters
list_all_annotationsBrowse every annotation grouped by book, newest first, with your noteslimit?: int (default: 50), offset?: int
recent_annotationsGet most recent annotations (flat, with date + book per row)limit?: int (default: 10), offset?: int
describe_annotationGet full details of a single annotation, with the book's "Open in Books" linkannotation_id: int
get_annotation_contextText window around a highlight (the paragraph it's in), with the highlight marked «...»annotation_id: int, chars_before?: int (default: 500), chars_after?: int (default: 500)
get_highlights_by_colorHighlights of a particular color, grouped by bookcolor: yellow\green\blue\pink\purple, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
search_notesSearch user notes (shows highlight + note inline)note: str, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
search_annotationsSearch across highlights + notes + surrounding text (shows notes inline)text: str, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
get_annotations_by_date_rangeAnnotations within a date range, inclusive of the before day, local time (flat, with date + book per row)after?: YYYY-MM-DD, before?: YYYY-MM-DD, limit?: int (default: 50), offset?: int, order_by?: newest\oldest
Library Stats
ToolDescriptionParameters
get_library_statsGet library summary with reading statsNone
Book Content

Only works for non-DRM EPUBs downloaded to this Mac (imported books, Project Gutenberg, Standard Ebooks, etc.). Apple Books Store purchases are usually FairPlay-protected and return a clear error, and iCloud-only books a "not downloaded" hint; describe_book's "Readable text" line tells in advance.

ToolDescriptionParameters
list_book_chaptersTable of contents for a book (chapter titles, order, nesting)book_id: int
get_chapter_contentPlain-text content of a chapter, with optional offset + max_chars slicing. chapter_id="current" (the default) reads the chapter you're on in Apple Booksbook_id: int, chapter_id?: str (default: "current"), offset?: int, max_chars?: int
get_current_reading_positionThe chapter the user last left off reading (via Apple Books' auto-bookmark CFI), with an "Open in Books" linkbook_id: int

Available Resources

Attachable data objects accessible from Claude Desktop's resource picker.

ResourceURIDescription
Currently Readingapple-books://currently-readingA short pointer to the book you're reading right now (the most recently opened in-progress book): title, author, book id, progress, an "Open in Books" link, the chapter you left off on with its chapter id (for non-DRM EPUBs; otherwise why its text can't be read), and how many highlights you have in it. It carries no chapter text or highlights; Claude fetches those on demand with get_chapter_content and list_annotations. Attach to any conversation to focus Claude on your current read.

Available Prompts

One-click workflows, accessible from Claude Desktop's prompt picker.

PromptDescriptionArguments
weekly_digestSummarize what I've read and highlighted in the past weekdays?: int (default: 7)
library_snapshotA reflection on my whole reading lifeNone
revisit_bookRevisit your notes and highlights from a specific bookbook_title: str

Installation

Requirements
  • macOS, with Apple Books opened at least once (it creates the library the server reads).
  • Python 3.10 or newer. uvx and the Claude Desktop extension provide one if needed.
  • Installed with the server: mcp >= 1.12 (< 2) and py-apple-books >= 1.10 (< 2).
Using uv (recommended)

uvx runs apple-books-mcp without a separate install step.

brew install uv  # for macos

uvx apple-books-mcp --version

The first run downloads about 14 MB of dependencies and can take up to a minute, which is close to how long Claude waits for a server to start. Running the command above once in Terminal warms uv's cache before you add the server to Claude. --version prints the apple-books-mcp, mcp and py-apple-books versions uvx resolved.

Then add the server to Claude with the JSON config or the Claude Code command below.

Claude Desktop extension (.mcpb)

Claude Desktop can also install apple-books-mcp as an extension, without editing its config: download apple-books-mcp- .mcpb from the latest GitHub release, double-click it (or open Settings → Extensions → Install Extension… and pick the file), and click Install. Desktop installs uv and the locked dependencies itself. Allow editing collections in the extension's settings does the same as --enable-writes.

On organization-managed Claude (Team/Enterprise), admins can limit De

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요