What it does
MCP server for Cisco Umbrella's deployment, admin, policy, reporting, and investigate APIs.
- Connects 내 컴퓨터에서 실행
- Account or key Needs CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE
- Category 개발자 도구
함께 쓰기
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
andrej-karpathy-skills
A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.
graphify
Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 2/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Cisco Umbrella 설치해 줘. https://mcp.popnx.com/i/wyre-ai-cisco-umbrella-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 2/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
AI에게 설치 맡기기
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Cisco Umbrella을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "cisco-umbrella": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Umbrella의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Cisco Umbrella에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
컴퓨터용 Claude 앱 설정 파일 열기
SettingsDeveloperEdit Config
이 설정을 붙여 넣고 저장
{ "mcpServers": { "cisco-umbrella": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } }키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Claude를 끄고 다시 열기
해 보기
Cisco Umbrella을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Cisco Umbrella을 쓰고 있다고 하거나 답에 Cisco Umbrella 도구 이름이 나오면 연결된 거예요
추가 설정 2개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다.· 기본값 stdio영어 원문 보기
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVEL로그 상세 수준: debug, info, warn, error· 기본값 info영어 원문 보기
Log verbosity: debug, info, warn, error
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Cisco Umbrella에 연결할 수 없어요
Cisco Umbrella는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · Cisco Umbrella에 연결되는 앱 쓰기
- Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
- Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
- Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
- Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
B · 개발자 도구에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Cisco Umbrella을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user cisco-umbrella --env CISCOUMBRELLA_API_KEY=your-value --env CISCOUMBRELLA_API_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e CISCOUMBRELLA_API_KEY -e CISCOUMBRELLA_API_SECRET -e AUTH_MODE ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Umbrella의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Cisco Umbrella에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
터미널 열기
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
이 명령을 붙여 넣고 Enter
claude mcp add --scope user cisco-umbrella --env CISCOUMBRELLA_API_KEY=your-value --env CISCOUMBRELLA_API_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e CISCOUMBRELLA_API_KEY -e CISCOUMBRELLA_API_SECRET -e AUTH_MODE ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3Enter 전에 “your-value”를 내 키로 바꾸세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Claude Code에서 /mcp 입력
Cisco Umbrella이 목록에 있고 연결됨으로 보이면 돼요
해 보기
Cisco Umbrella을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Cisco Umbrella을 쓰고 있다고 하거나 답에 Cisco Umbrella 도구 이름이 나오면 연결된 거예요
추가 설정 2개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다.· 기본값 stdio영어 원문 보기
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVEL로그 상세 수준: debug, info, warn, error· 기본값 info영어 원문 보기
Log verbosity: debug, info, warn, error
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Cisco Umbrella을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "cisco-umbrella": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Umbrella의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Cisco Umbrella에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 입력
Cisco Umbrella 설정에서 CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Cursor에서 AI 채팅을 Agent 모드로 열기
해 보기
Cisco Umbrella을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Cisco Umbrella을 쓰고 있다고 하거나 답에 Cisco Umbrella 도구 이름이 나오면 연결된 거예요
추가 설정 2개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다.· 기본값 stdio영어 원문 보기
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVEL로그 상세 수준: debug, info, warn, error· 기본값 info영어 원문 보기
Log verbosity: debug, info, warn, error
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Umbrella 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
AI에게 설치 맡기기
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Cisco Umbrella을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "cisco-umbrella": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "CISCOUMBRELLA_API_KEY", "-e", "CISCOUMBRELLA_API_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3" ], "env": { "CISCOUMBRELLA_API_KEY": "your-value", "CISCOUMBRELLA_API_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Umbrella의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
Docker 설치 (아직 없다면)
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --version- 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
- "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
터미널 여는 법
Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다:
docker --version한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Cisco Umbrella에 가입하고 키 만들기
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 입력
Cisco Umbrella 설정에서 CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
VS Code에서 AI 채팅을 Agent 모드로 열기
해 보기
Cisco Umbrella을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Cisco Umbrella을 쓰고 있다고 하거나 답에 Cisco Umbrella 도구 이름이 나오면 연결된 거예요
추가 설정 2개 (입력하지 않아도 사용 가능)
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다.· 기본값 stdio영어 원문 보기
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.LOG_LEVEL로그 상세 수준: debug, info, warn, error· 기본값 info영어 원문 보기
Log verbosity: debug, info, warn, error
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
개발자용: 터미널 명령과 JSON 설정
컴퓨터에 설치
Claude Code
claude mcp add --scope user cisco-umbrella --env CISCOUMBRELLA_API_KEY=your-value --env CISCOUMBRELLA_API_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e CISCOUMBRELLA_API_KEY -e CISCOUMBRELLA_API_SECRET -e AUTH_MODE ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"cisco-umbrella": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"CISCOUMBRELLA_API_KEY",
"-e",
"CISCOUMBRELLA_API_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3"
],
"env": {
"CISCOUMBRELLA_API_KEY": "your-value",
"CISCOUMBRELLA_API_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"cisco-umbrella": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"CISCOUMBRELLA_API_KEY",
"-e",
"CISCOUMBRELLA_API_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3"
],
"env": {
"CISCOUMBRELLA_API_KEY": "your-value",
"CISCOUMBRELLA_API_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"cisco-umbrella": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"CISCOUMBRELLA_API_KEY",
"-e",
"CISCOUMBRELLA_API_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-umbrella-mcp:v1.0.3"
],
"env": {
"CISCOUMBRELLA_API_KEY": "your-value",
"CISCOUMBRELLA_API_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}직접 입력할 값
CISCOUMBRELLA_API_KEY비밀 필수 envCisco Umbrella API Key, from Admin > API Keys (or Console Settings > API Keys for Multi-org/MSP) in the Umbrella admin console.CISCOUMBRELLA_API_SECRET비밀 필수 envAPI Key와 짝을 이루는 Cisco Umbrella API Secret입니다. 생성 시에만 한 번 표시되며 나중에 다시 조회할 수 없습니다.영어 원문 보기
Cisco Umbrella API Secret paired with the API Key. Shown only once at creation and cannot be retrieved later.MCP_TRANSPORTenv서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다.영어 원문 보기
Transport mode for the server. Set to 'stdio' for local CLI use; the image defaults to 'http' for gateway hosting.AUTH_MODE비밀 필수 env자격 증명 소스: 'env'는 로컬 변수를 읽고, 'gateway'는 WYRE MCP Gateway의 헤더 주입을 기대합니다.영어 원문 보기
Credential source: 'env' reads vars locally, 'gateway' expects header injection from the WYRE MCP Gateway.LOG_LEVELenv로그 상세 수준: debug, info, warn, error영어 원문 보기
Log verbosity: debug, info, warn, error
설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
한눈에 보기
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 WYRE-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 7일 전
- ! 주의
라이선스 있음
GitHub가 라이선스 종류를 알아내지 못했어요. 파일을 열어 확인하세요
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/wyre-ai-cisco-umbrella-mcp)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
개발자 도구 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 6136개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 6136개 중 53%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 6136개 중 45%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
Cisco Umbrella, 안전한가요?
해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
입력해야 할 값: CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, AUTH_MODE
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 7일 전 변경됐고, 최신 버전(1.0.3)은 28일 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| 이 항목 Cisco Umbrella | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 |
| 키 필요 | 예 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| 기본 점검 | 2/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| 라이선스 | NOASSERTION | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Cisco Umbrella MCP Server
MCP server for Cisco Umbrella's NextGen REST API - deployment inventory, admin, policy, reporting, and investigate visibility - for AI assistants and the WYRE Conduit gateway.
Authentication
Create an API Key in the Umbrella admin console (Admin > API Keys, or Console Settings > API Keys on a Multi-org/MSP console) to receive an API Key and API Secret pair.
The secret is shown only once at creation time and cannot be retrieved later - store it somewhere safe immediately.
This server exchanges that pair for a short-lived (1-hour) Bearer access token via POST /auth/v2/token (grant_type=client_credentials, HTTP Basic auth), and handles the exchange and its refresh on expiry internally. Callers only ever need to supply the long-lived API Key/Secret below.
A note on a real discrepancy in Cisco's own documentation: Cisco's published Postman collection (CiscoDevNet/cloud-security, Umbrella/PostmanExamples/umbrella-external-postman-collection.json) encodes the token request as a bare GET with no body, while Cisco's DevNet "Getting Started" and "Quickstart" prose docs both independently specify POST with a grant_type=client_credentials form body. This server follows the prose docs (POST), since two independent doc pages agree and it matches the standard OAuth2 client_credentials flow Cisco names explicitly - but this was not verified against a live credential pair. If token exchange 401s against a real account, try a bare GET with no body before assuming the credentials are bad.
Configuration
Copy .env.example and set the variables below. The stdio transport reads CISCOUMBRELLA_* and does not use CONDUIT_S2S_SECRET.
| Env var | Description | |||
|---|---|---|---|---|
CISCOUMBRELLA_API_KEY | API Key from the Umbrella admin console. Required for stdio and AUTH_MODE=env. Not read in gateway mode. | |||
CISCOUMBRELLA_API_SECRET | API Secret paired with the API Key. Shown only once at creation. Required for stdio and AUTH_MODE=env. Not read in gateway mode. | |||
MCP_TRANSPORT | stdio (default) or http. | |||
AUTH_MODE | env (default, reads the vars above) or gateway (Docker image and Compose default). Gateway mode requires X-CiscoUmbrella-Api-Key and X-CiscoUmbrella-Api-Secret on each /mcp request and never falls back to CISCOUMBRELLA_*. | |||
CONDUIT_S2S_SECRET | Required for HTTP. HMAC secret checked against X-Gateway-S2S on /mcp. Generate with openssl rand -hex 32. If empty or a known placeholder, the HTTP server logs an error and exits non-zero. The value is never logged. | |||
MCP_ALLOW_INSECURE_DEV | Set to exactly 1 to start HTTP without CONDUIT_S2S_SECRET. Logs a warning, does not enforce X-Gateway-S2S, and binds 127.0.0.1 only. A non-loopback MCP_HTTP_HOST refuses to start. A known placeholder secret is still refused. Local development only. | |||
MCP_HTTP_HOST | Bind address when MCP_TRANSPORT=http. Defaults to 127.0.0.1. A configured CONDUIT_S2S_SECRET honors this value. The container image sets 0.0.0.0. | |||
MCP_HTTP_PORT | HTTP port. Defaults to 8080. | |||
LOG_LEVEL | debug \ | info (default) \ | warn \ | error. |
/health and /healthz stay unauthenticated and do not read credentials.
HTTP authentication
With MCP_TRANSPORT=http and CONDUIT_S2S_SECRET set, every /mcp request must include X-Gateway-S2S. The check is verifyS2sHeader in src/s2s-verify.ts: the header value is t= ,v1= , where the hex is HMAC-SHA256 of the literal string t= keyed with CONDUIT_S2S_SECRET (64 lowercase hex characters). The timestamp must be within 300 seconds of the server clock. A missing or invalid header is HTTP 401, before vendor credentials are read. An empty secret refuses to start unless MCP_ALLOW_INSECURE_DEV=1. A known placeholder (replace-with-a-real-secret, your-s2s-secret, changeme, change-me, placeholder, secret, example, replace-me, s2s-secret, any case) refuses to start even with that flag, so a copied example cannot forge the header.
TS=$(date +%s)
SIG=$(printf 't=%s' "$TS" | openssl dgst -sha256 -hmac "$CONDUIT_S2S_SECRET" -hex | awk '{print $NF}') curl -sS http://127.0.0.1:8080/mcp \ -H 'Content-Type: application/json' \ -H 'Accept: application/json, text/event-stream' \ -H "X-Gateway-S2S: t=${TS},v1=${SIG}" \ -H "X-CiscoUmbrella-Api-Key: $CISCOUMBRELLA_API_KEY" \ -H "X-CiscoUmbrella-Api-Secret: $CISCOUMBRELLA_API_SECRET" \ -d '{"jsonrpc":"2.0","id":1,"method":"tools/list"}'
In AUTH_MODE=gateway, /mcp also requires both X-CiscoUmbrella-Api-Key and X-CiscoUmbrella-Api-Secret. Those headers are the only credential source for that request. A request missing either one returns 401 and does not fall back to CISCOUMBRELLA_* in the process environment.
AUTH_MODE=env still requires a valid X-Gateway-S2S header, then uses CISCOUMBRELLA_API_KEY and CISCOUMBRELLA_API_SECRET from the environment.
Request limits
- HTTP request bodies are capped at 256 KiB (262144 bytes). After the
X-Gateway-S2Scheck passes, aContent-Lengthabove the cap returns 413 with a JSON-RPC error; bodies withoutContent-Lengthare capped by the MCP SDK transport. Unauthenticated requests still get 401 first. tools/callarguments are capped at 10,000 elements (every array item and object key at any depth). Larger inputs return anisErrortool result and are never dispatched.
These limits address CVE-2026-111768 / GHSA-46jr-4wx8-v453 (memory exhaustion during validation) and GHSA-f897-62hf-6gxq (no request body / batch cap).
Tools
Deployments
umbrella_list_networks- list registered public-IP network identities.umbrella_list_internal_networks- list internal (RFC1918) network identities.umbrella_list_sites- list Umbrella sites.umbrella_list_virtual_appliances- list virtual appliances and their status.umbrella_list_roaming_computers- list roaming-client-enrolled computers.umbrella_get_internal_domains- get all internal domains configured to bypass Umbrella DNS.
Admin
umbrella_list_roles- list administrative roles.umbrella_list_users- list admin console users.umbrella_get_user- get a specific admin console user.umbrella_list_api_keys- list configured API keys.
Policies
umbrella_list_destination_lists- list destination (allow/block) lists.umbrella_list_destinations- list destinations within a specific destination list.
Reports
umbrella_top_destinations- most-requested destinations, optionally by traffic type (dns/proxy/firewall).umbrella_total_requests- total request counts, optionally by traffic type.umbrella_top_categories- most-requested content/security categories.umbrella_activity- raw activity log, optionally by traffic type.umbrella_identities- identities (roaming/network/mobile/AD users) with traffic summaries.umbrella_appdiscovery_applications- discovered cloud applications.umbrella_appdiscovery_app_identities- identities observed using a discovered application.umbrella_appdiscovery_app_risk- risk details for a discovered application.umbrella_api_usage_summary/umbrella_api_usage_requests/umbrella_api_usage_responses/umbrella_api_usage_keys- API usage reporting.
Investigate
umbrella_domain_categorization- content/security categorization for a domain.umbrella_domain_risk_score- Cisco's risk score for a domain.umbrella_domain_security_score- detailed security scoring signals for a domain.umbrella_top_most_seen_domains- the top million most globally-popular domains.umbrella_get_samples- malware/file samples for a domain, IP, or URL.umbrella_domain_volume- DNS query volume over time for a domain.umbrella_domain_resource_records- passive DNS resource records for a domain.
Every Reports/Investigate/Deployments/Admin/Policies list tool that Cisco's docs don't fully enumerate the filter set for accepts an optional additionalParams object, passed through verbatim as extra query-string parameters (e.g. categories, identityids, verdict, domains on Reports endpoints) - documented Cisco filters this client doesn't model as first-class arguments.
Scope
This is a v1, read-only surface: this server only implements GET endpoints across Deployments, Admin, Policies, Reports, and Investigate. Explicitly deferred, all real endpoints in Cisco's own Postman collection, out of scope for now:
- Add/remove internal domains (
POST/DELETE /deployments/v2/internaldomains) - Add/remove tunnels (
POST/DELETE /deployments/v2/tunnels) - Add tags and tag/untag devices (
POST /deployments/v2/tags*) - Create/delete users (
POST/DELETE /admin/v2/users) - Create API keys (
POST /admin/v2/apiKeys) - Add/remove destinations on a destination list (
POST/DELETE /policies/v2/destinationlists/{id}/destinations) - Update an App Discovery application's label (
PATCH /reports/v2/appDiscovery/applications/{id})
These are provisioning/mutation actions, out of scope for a read-only monitoring connector - consistent with how other connectors in this wave (Printix, WatchGuard Cloud) deferred provisioning-heavy writes. They can be added as a follow-up if a write-capable v2 is ever needed.
Also explicitly out of scope: the Legacy Umbrella Reporting v1/v2 APIs (different auth, different host - investigate.api.umbrella.com / management.api.umbrella.com) and any Multi-org/MSP child-organization switching via the X-Umbrella-OrgId header - real, documented Cisco behavior, but not covered in enough concrete request/response detail (whether it applies to the token request, every subsequent request, or both) to implement with confidence without a live credential pair to verify against.
Development
npm install
npm run build npm test npm run lint # tsc --noEmit
Docker
The image listens on 0.0.0.0 inside the container (MCP_HTTP_HOST) and defaults to AUTH_MODE=gateway. Startup still refuses to run without a real CONDUIT_S2S_SECRET. Publish the port on loopback. In gateway mode, Umbrella credentials arrive on each request as headers; they are not read from the environment.
docker build -t cisco-umbrella-mcp .
docker run \ -e CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" \ -p 127.0.0.1:8080:8080 \ cisco-umbrella-mcp
Compose refuses to start when CONDUIT_S2S_SECRET is unset, defaults AUTH_MODE to gateway, publishes 127.0.0.1:8080:8080, and does not set CISCOUMBRELLA_API_KEY, CISCOUMBRELLA_API_SECRET, or env_file:
CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" docker compose up
Single-tenant HTTP (AUTH_MODE=env) still requires the S2S secret, then uses CISCOUMBRELLA_API_KEY and CISCOUMBRELLA_API_SECRET. It is separate from the gateway Compose service above.
docker run \
-e CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" \ -e AUTH_MODE=env \ -e CISCOUMBRELLA_API_KEY=... \ -e CISCOUMBRELLA_API_SECRET=... \ -p 127.0.0.1:8080:8080 \ cisco-umbrella-mcp
Local HTTP without a secret is development-only. It binds 127.0.0.1 (including when MCP_HTTP_HOST is localhost or ::1) and logs a warning. A non-loopback MCP_HTTP_HOST makes startup exit. The container image sets MCP_HTTP_HOST=0.0.0.0, so the bypass inside Docker also needs -e MCP_HTTP_HOST=127.0.0.1. Do not publish that port off loopback.
MCP_TRANSPORT=http MCP_ALLOW_INSECURE_DEV=1 npm run start:http