What it does
Serial terminal with a GUI that AI assistants drive over MCP: read device logs, send commands.
- Connects 내 컴퓨터에서 실행
- Account or key No key needed
- Category 개발자 도구
함께 쓰기
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
andrej-karpathy-skills
A single CLAUDE.md file to improve Claude Code behavior, derived from Andrej Karpathy's observations on LLM coding pitfalls.
graphify
Turn any codebase, with its docs, SQL schemas, configs, and PDFs, into a queryable knowledge graph. A /graphify skill for Claude Code, Cursor, Codex, and Gemini CLI: local deterministic AST parsing, every edge explained, no vector store.
이 순위인 이유
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
검사 3/3 통과 · 내 컴퓨터에서 실행돼요
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기
해 보기
XTELL Serial을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 XTELL Serial을 쓰고 있다고 하거나 답에 XTELL Serial 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 XTELL Serial에 연결할 수 없어요
XTELL Serial는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
대신 이렇게 할 수 있어요
A · XTELL Serial에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
B · 개발자 도구에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
- Sentry✓ ChatGPT
- Compiler Explorer✓ ChatGPT
- GitDiagram✓ ChatGPT
Claude Code는 아직 XTELL Serial에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
대신 이렇게 할 수 있어요
A · XTELL Serial에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
Cursor는 아직 XTELL Serial에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
대신 이렇게 할 수 있어요
A · XTELL Serial에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
VS Code는 아직 XTELL Serial에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
대신 이렇게 할 수 있어요
A · XTELL Serial에 연결되는 앱 쓰기
- 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
한눈에 보기
- 주간 다운로드i
- npm/PyPI에 없음
- 연결 방식
- 내 컴퓨터에서 실행
- 최신 버전i
- 0.1.1
- 레지스트리 공개i
- 2026년 10월 21일
- 코드 마지막 변경i
- 2026년 10월 21일
- 제작자
- xtell-cn
- 패키지
mcpb: …/xtell-serial-0.1.1.mcpb- 웹사이트
- www.xtell.cn
- 레지스트리 상태
- 활성
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
할 수 있는 일
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 xtell-cn 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 29일 전
- ✓ 통과
라이선스 있음
Apache-2.0 사용
- – 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
- – 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/xtell-cn-xtell-serial)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
개발자 도구 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 6116개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 6116개 중 52%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 6116개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
XTELL Serial, 안전한가요?
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 29일 전 변경됐고, 최신 버전(0.1.1)은 29일 전 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: GitDiagram, Appllama, Cloudflare MCP, Omnara, Repowise
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
GitDiagram
Architecture diagrams, explanations and Mermaid source for public GitHub repositories.
Appllama
Study screens, flows and paywalls from top-earning iOS apps, then build from what wins.
Omnara
Deploy durable AI agents with Omnara, an open-source managed-agent platform.
Repowise
Codebase intelligence for AI coding agents: graph, git history, docs, decisions, code health.
| 이 항목 XTELL Serial | GitDiagram | Appllama | Cloudflare MCP | Omnara | Repowise | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 4/4 | 5/5 |
| 라이선스 | Apache-2.0 | MIT | MIT | Apache-2.0 | Apache-2.0 | AGPL-3.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
xtell-serial
About XTELL (www.xtell.cn)
Shenzhen XTELL Future Technology delivers true full-stack development: software, circuit design, mold development and mass production, all from one team. Our work spans embedded software and hardware, cloud platforms and backends, AI algorithms, IoT solutions and mobile internet technology. We provide the full lifecycle from concept design to mass-production delivery, and the close collaboration between hardware and software helps clients bring products to market quickly and succeed commercially.
A serial terminal with a GUI that your AI assistant can drive through MCP. You watch the log scroll in a normal desktop window; Claude, Cursor or any MCP client reads the same log and sends commands to the same port.
Status: early preview (v0.1). Windows only for now. The full MCP setup guide and tool reference is in docs/MCP_SETUP.md (also available in Chinese).
*The log in the upper pane, the filter (here ERR) highlighting matches and listing them below. The log is demo data.*
What it is
- A full serial terminal: baud rates up to 10 Mbaud, UTF-8 / GBK / GB2312 / ASCII, HEX view and send, timestamps, line numbers.
- Live filtering by substring or regular expression, with highlighting and a separate filtered view.
- Repeat-send, send history, save-to-file with append mode, a 100,000-line buffer with a usage bar.
- English and Chinese user interface: use the language item in the menu bar, next to File (ENG / 中文), to switch; the choice is remembered (the first run follows the Windows display language).
- Several windows at once, each with its own name, for bench setups with more than one board. The first window acts as a local hub; if it closes, another one takes over.
- An MCP server (
xtell-serial-mcp) that exposes 14 tools to AI clients: list ports, connect, send, auto-send, read received / sent / filtered data (with optional time ranges), set a filter, save to file, clear buffers, check buffer status.
The GUI and the MCP server talk over a local TCP hub on 127.0.0.1:50016 (override with XTELL_SERIAL_HUB_PORT). Nothing listens on a public interface.
More screenshots
Run from source
pip install -r requirements.txt
python xtell_serial.py
Build executables (Windows)
pip install pyinstaller
build_exe.bat
This produces dist\xtell-serial.exe (the GUI) and dist\xtell-serial-mcp.exe (the MCP server).
Connect an AI client
Register `xtell-serial-mcp.exe` (not the GUI) as an MCP server. For Claude Code:
claude mcp add xtell-serial C:\path\to\xtell-serial-mcp.exe
For Claude Desktop, Cursor and others, add this to the client's MCP configuration (see mcp_config.example.json):
{
"mcpServers": { "xtell-serial": { "command": "C:\\path\\to\\xtell-serial-mcp.exe", "args": [] } } }
The full tool reference is in docs/MCP_SETUP.md.
Then ask your assistant something like: *"Connect to COM3 at 115200, send AT+GMR, and tell me what version the module reports."*
Safety notes
- The assistant can send arbitrary bytes to whatever device is on the port. Do not connect it to hardware where an unexpected command could cause harm.
- The local hub accepts connections from
127.0.0.1only.
License
Apache License 2.0, see LICENSE.
Built by XTELL, an embedded hardware and software design house in Shenzhen.