timesfm
TimesFM เป็นโมเดลพื้นฐานสำหรับข้อมูลอนุกรมเวลาที่ผ่านการฝึกมาแล้ว พัฒนาโดย Google Research ใช้สำหรับพยากรณ์ข้อมูลอนุกรมเวลา
ยังไม่มีคำอธิบายภาษาไทย ดูข้อเท็จจริงด้านล่าง หรือเปิดคำอธิบายต้นฉบับจากผู้ทำ
Drive a live Flutter app from an AI agent: snapshot the Semantics tree, tap, type and screenshot.Skill ที่สอน AI ทำงานแบบนี้ ใช้ร่วมกับตัวนี้ได้
TimesFM เป็นโมเดลพื้นฐานสำหรับข้อมูลอนุกรมเวลาที่ผ่านการฝึกมาแล้ว พัฒนาโดย Google Research ใช้สำหรับพยากรณ์ข้อมูลอนุกรมเวลา
Open-source intelligence for the global theater. Track everything from the corporate/private jets of the wealthy, and spy satellites, to seismic events in one unified interface. Hook an AI agent up to have it parse through data and find previously unseen correlations. The knowledge is available to…
google-maps-scraper ใช้ดึงข้อมูลสถานที่จาก Google Maps เช่น ชื่อ ที่อยู่ เบอร์โทร เว็บไซต์ คะแนนรีวิว จำนวนรีวิว พิกัดละติจูดลองจิจูด และอีเมล สำหรับแต่ละสถานที่
หน้ารายการเรียงด้วยคะแนนการใช้งาน (เต็ม 100) จากส่วนเหล่านี้
| ความนิยม | 7/80 | ดาว GitHub หรือยอดดาวน์โหลดต่อสัปดาห์ ค่ามากนับ 60 ค่าน้อยนับ 20 |
|---|---|---|
| ความสด | 12/12 | ออกรุ่นหรือแก้โค้ดใน 30 วัน ได้เต็ม |
| ระบบยังตอบ | 0/8 | endpoint บนคลาวด์ตอบตอนตรวจล่าสุด |
| คะแนนการใช้งาน | 19/100 |
คุณภาพ: ผลตรวจเบื้องต้นผ่าน 3/3 ข้อ (แสดงให้ดู ไม่ได้ใช้เรียง) · ความมาแรง: ยังไม่มีข้อมูล (ใช้เรียงเฉพาะแท็บมาแรง)
เลือกโปรแกรม AI ที่คุณใช้ แล้วคัดลอกค่าตั้งไปวาง
ผลตรวจผ่าน 3/3 · ทำงานบนเครื่องคุณ
ขั้นแรก: คุณใช้ AI ตัวไหน
เลือกแอปที่คุณใช้ ขั้นตอนจะขึ้นด้านล่าง
Claude ยังต่อ Tapir ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
ChatGPT ยังต่อ Tapir ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
ข · ตัวอื่นในหมวด เว็บและเบราว์เซอร์ ที่ต่อกับ ChatGPT ได้
เลือกจากตัวที่ใช้มากในหมวดเดียวกัน เฉพาะตัวที่ต่อด้วยที่อยู่ได้โดยไม่ต้องใส่คีย์
Claude Code ยังต่อ Tapir ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
Cursor ยังต่อ Tapir ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
VS Code ยังต่อ Tapir ไม่ได้
ผู้ทำยังไม่ได้ลงวิธีติดตั้งไว้ในทะเบียน MCP
รันในเครื่องคุณ รายการเครื่องมือจะขึ้นในแอป AI หลังติดตั้ง
เราตรวจจากข้อมูลที่ใครก็เปิดดูได้ ยังไม่ได้อ่านโค้ด ข้อที่ไม่เกี่ยวกับตัวนี้ไม่นับในตัวหาร · ตรวจเมื่อ 19 พ.ย. 2569
ชื่อใน registry ยืนยันด้วยบัญชี GitHub anilcancakir ซึ่งเป็นเจ้าของ repo
มีการแก้โค้ดล่าสุด เมื่อวาน
ใช้ MIT
ตัวนี้รันบนเครื่องคุณ ไม่มี endpoint บนอินเทอร์เน็ต
ตัวนี้รันบนเครื่อง ใช้ค่าที่ตั้งในเครื่องแทน
รันในเครื่องคุณ เราอ่านรายการเครื่องมือได้เฉพาะตัวที่มี endpoint บนอินเทอร์เน็ต
ถ้าคุณเป็นผู้ทำตัวนี้ คัดลอกโค้ดนี้ไปวางใน README ได้เลย ป้ายลิงก์กลับมาที่หน้านี้
[](https://mcp.popnx.com/th/servers/anilcancakir-tapir)ถาม แชร์เคล็ดลับ หรือแจ้งว่าใช้ไม่ได้ เรียงตามที่คนกดว่ามีประโยชน์
ยังไม่มีใครโพสต์ ถามหรือแชร์เป็นคนแรกได้เลย
ข้อความในส่วนนี้เขียนโดยผู้ใช้ ไม่ใช่ทีม PopNx
ยังไม่มีรีวิว
เทียบกับทุก server ที่ยังใช้งานในหมวดนี้ทั้งทะเบียน ดาวนับเฉพาะเมื่อผู้ลงทะเบียนเป็นเจ้าของ repo
จากการตรวจเบื้องต้นของเรา ผ่าน 3 จาก 3 ข้อที่ตรวจได้ เรายังไม่ได้อ่านโค้ด ก่อนใส่กุญแจหรือ token ให้ดูว่า server ขอสิทธิ์อะไร และเลือกกุญแจที่ทำได้เท่าที่จำเป็น
registry ไม่ได้ระบุว่าต้องใช้กุญแจ แต่บางตัวจะขอให้ล็อกอินตอนใช้ครั้งแรก
รันบนเครื่องของคุณ โปรแกรม AI จะเปิด server ขึ้นมาเองเมื่อใช้ ข้อมูลไม่ต้องผ่านเซิร์ฟเวอร์ของผู้ทำ (ยกเว้นตัวที่ไปเรียกบริการออนไลน์ต่อ)
repo บน GitHub มีการแก้โค้ดล่าสุด เมื่อวาน และส่งรุ่นล่าสุด (1.1.0) เข้า registry เมื่อวาน
โปรแกรมที่รองรับ MCP เช่น Claude Desktop, Claude Code, Cursor และ VS Code
ในหมวดเดียวกันมี Browser Use, changedetection.io (official), Apify MCP Server, Pomerado, Actionbook
หมวดเดียวกันจากผู้ทำคนอื่น ผ่านตัวตรวจคำสั่งแล้ว ตัวทางการขึ้นก่อน แล้วเรียงตามดาว
อ่านการ์ด:↓ ดาวน์โหลดต่อสัปดาห์i★ ดาว GitHubiสามเสา: รีวิว · ผลตรวจ · การใช้งานiอัปเดต = วันที่ส่งรุ่นล่าสุดเข้า registryi
ให้ AI ทำงานบนเว็บแทนคุณ เช่น กรอกฟอร์ม ค้นหา และดึงข้อมูล ใช้เบราว์เซอร์บนคลาวด์ของผู้ทำหรือรันในเครื่องก็ได้
Official changedetection.io MCP: web page change tracking, back-in-stock and price alerts.
Extract data from any website with thousands of scrapers, crawlers, and automations on Apify Store ⚡
Connect your agents to any website. The cheaper, faster and more reliable alternative to browser use
Let your AI agent operate any website through a real, logged-in browser session.
| ตัวนี้ Tapir | Browser Use | changedetection.io (official) | Apify MCP Server | Pomerado | Actionbook | |
|---|---|---|---|---|---|---|
| ทำงานที่ไหน | ต้องลงในเครื่อง | มีทั้งบนคลาวด์และแบบลงเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง | ใช้บนคลาวด์ ไม่ต้องลงเครื่อง |
| ต้องใส่คีย์ | ไม่ | ใช่ | ไม่ | ใช่ | ไม่ | ไม่ |
| กด + ใน Claude ได้ | ไม่ | ใช่ | ไม่ | ไม่ | ไม่ | ไม่ |
| ผลตรวจเบื้องต้น | 3/3 | 5/5 | 3/3 | 4/4 | 4/4 | 4/4 |
| สัญญาอนุญาต | MIT | MIT | Apache-2.0 | MIT | MIT | Apache-2.0 |
| ราคา | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน | ไม่พบค่าใช้จ่ายในทะเบียน |
ส่วนนี้คัดจาก repo ของผู้ทำตามต้นฉบับ PopNx MCP ไม่ได้ตรวจหรือรับรองเนื้อหา ตัด HTML รูปภาพ และสคริปต์ออกแล้ว ลิงก์จะพาออกนอกเว็บ
Tapir
Give your AI agent eyes and hands on a running Flutter app.
Snapshot the Semantics tree, tap, type, scroll, screenshot and profile the live app from one CLI and one MCP server, with no flutter_test harness and no test file between actions.
Documentation · pub.dev · Issues
| Fact | Value |
|---|---|
| Package | tapir |
| Install | flutter pub add tapir, then dart run tapir tapir:install |
| Import | package:tapir/tapir.dart (TapirPlugin.install(), behind if (!kReleaseMode)) |
| Entry points | dart run tapir , ./bin/dowel , TapirPlugin.install(), TapirPlugin.enrichers, TapirDowelProvider (package:tapir/cli.dart), dart run tapir mcp:serve |
| Platforms | Any Flutter target that exposes a VM Service in a debug or profile build: Android, iOS, web, macOS, Windows, Linux; viewport and device emulation need Chrome with a CDP port; tapir_hot_reload_and_snap writes to the flutter run stdin FIFO, so it needs a POSIX host; on a Windows host mcp:install writes a dart run entry, never ./bin/dowel |
| Requires | Dart 3.13, Flutter 3.47; a plugin of dowel (^1.0.5) |
| Dependencies | dowel, image, meta, wind_kit_diagnostics_contracts, yaml, the Flutter SDK |
| License | MIT |
flutter pub add tapir
dart run tapir tapir:install dart run tapir start --device=macos # dowel records the session every tapir:* command dials dart run tapir tapir:snap
tapir:install patches lib/main.dart (the import, WidgetsFlutterBinding.ensureInitialized() when missing, and TapirPlugin.install() inside a !kReleaseMode guard), then scaffolds the fast ./bin/dowel wrapper and registers tapir as a dowel plugin. Re-running it changes nothing. The installation guide also adds dowel as a direct dependency (dart pub add dowel). Wired by hand, main.dart looks like this:
import 'package:flutter/foundation.dart';
import 'package:flutter/widgets.dart'; import 'package:tapir/tapir.dart';
Future main() async { WidgetsFlutterBinding.ensureInitialized(); if (!kReleaseMode) { TapirPlugin.install(); } runApp(const MyApp()); // MyApp is the host app's root widget. }
The guard is !kReleaseMode, not kDebugMode: debug and profile builds carry tapir (tapir:perf_run measures a profile build) and a release build tree-shakes it. Without the guard tapir ships in release, and anyone who reaches that app's VM Service can drive it. --dart-define=TAPIR_DISABLE=1 skips registration in a build that must not expose the extensions. The example/ app gives each verb a live target widget.
dart run tapir tapir:snap --interactiveOnly
| Token | Minted by | Lifetime |
|---|---|---|
e | tapir:snap | The same Semantics node keeps its token across snapshots, and a token outlives its widget. A ref whose element left the tree is relocated by label (reresolved on the response) only when the snapshot recorded a binding for it, the live tree has the same number of nodes with that label and the match sits on the route the ref was minted on; otherwise it fails as defunct and you re-snap |
q | tapir:find, tapir:observe | Re-resolved against the live tree on every action; survives rebuilds |
Narrow a read with --within= , --interactiveOnly and --grep= ; they compose. --includeEnrichers adds Wind state under each W-widget that has a className: up to seven contract fields, of which bgColor and textColor appear only when they resolve (tapir:observe keeps only breakpoint and states unless you pass --includeEnrichers=full; the host calls Wind.installDebugResolver() from wind_kit, read through wind_kit_diagnostics_contracts) and Magic state (MagicTapirIntegration.install() from package:magic_devtools/tapir.dart, after Magic.init(); it exists only in a magic_devtools release built on tapir, and tapir:install warns and skips it otherwise; see Magic integration). A ref line ending in [offscreen] or [occluded] names why an action would fail before you try it.
dart run tapir tapir:tap --ref=e2 --snapshot=diff
dart run tapir tapir:fill --ref=e1 --text="ada@example.com" --json
Gestures (tap, hover, drag, scroll, double_click, right_click, triple_click) and text verbs (type, clear, fill, press_key) dispatch real pointer and key events into the widget tree. tap, hover, drag, the click variants, type, fill and set_checkbox (on the control it taps) first pass the gate (clear, scroll, press_key and select_option skip it), in a fixed order, and a refusal names the reason an agent can branch on:
| Check | Refusal substring | Recovery |
|---|---|---|
| Defunct (preflight) | defunct (...) | Re-snap |
| Enabled | not enabled | Re-snap; the widget may enable later |
| Zero rect | zero rect | Re-snap or re-find |
| Off-viewport (scrolls into view first) | off-viewport | tapir:scroll into view, then retry |
| Stable across two frames | not stable | Wait for the animation; --no-checkStable |
| Receives events (hit test) | obscured by | Dismiss the overlay (tapir:reset_overlays); --no-checkReceivesEvents |
A green tick is dispatch, not effect. Add --json to print the whole response and read the effect block: effect.changed for tap and scroll, effect.verified and effect.value for type, fill and clear. When the hit test could not answer (routine on a web debug build) the response of a gated verb such as tap, type or fill carries a checks block with receivesEvents: indeterminate instead of a silent pass. A target tapir will not act on at all (a ref that is not a text field, say) answers the error type refused (code -32001), and a value it cannot use answers invalid_param. tapir:run "tap --ref=e5" "snap --grep Counter" batches verbs into one round trip.
dart run tapir tapir:observe --roles=button,textbox # q<N> handles, re-resolved per action
dart run tapir tapir:wait_for --text="Welcome back" --timeoutMs=5000
| Verb | Returns |
|---|---|
tapir:wait_for | Waits for --text, --textGone or --expression |
tapir:wait_for_network_idle | Waits until in-flight HTTP requests stay at zero for --idleMs |
tapir:observe | A flat candidate list of interactive widgets with q handles: observe once, act many times (no model call inside tapir) |
tapir:console, tapir:exceptions | In-app debugPrint output and FlutterErrors, overflow included; --since= scopes errors to one action; --grep and --logger narrow the console buffer |
tapir:get_routes | The router's location and the top page (tapir:navigate and tapir:navigate_back change it) |
When the app is not producing frames (a hidden window or a backgrounded tab) tapir forces frames outside the web and reports framesForced: true; where it cannot, every response carries a warnings block rather than a stale answer that looks fresh. See frame production.
dart run tapir tapir:screenshot --output=shot.jpg
dart run tapir start --device=chrome --cdp-port=9333 dart run tapir tapir:device_profile --preset=pixel-8
| Surface | Behaviour |
|---|---|
tapir:screenshot | JPEG (default) or PNG of the viewport, or of one widget with --ref (and a sub-rect of it with --rect); --strict exits 1 without writing the file when the app is not producing frames (on a web session it covers --ref captures only) |
| Web screenshot | With --cdp-port, the CLI captures through CDP Page.captureScreenshot; the tapir_screenshot MCP tool stays in-isolate and can time out under CanvasKit, so prefer the CLI on web; a --cdp-port session cannot run tapir_evaluate (the web-server device has no evaluate) |
tapir:device_profile | Presets iphone-x, iphone-13, iphone-15-pro, pixel-5, pixel-8, ipad-pro-12.9, desktop-1440, desktop-1920 (viewport, DPR, touch, user agent); the emulation ends with the command, the window size stays. tapir:resize_viewport --width --height overrides the viewport until exit, or longer with --hold |
tapir:hot_reload_and_snap | Hot reload, then snapshot, screenshot and recent exceptions in one round trip |
dart run tapir tapir:perf_begin --mode=attribution
dart run tapir tapir:tap --ref=e7 dart run tapir tapir:perf_end
| Verb | Does |
|---|---|
tapir:perf_begin, tapir:perf_end | Bracket one interaction; attribution ranks the widget builds that cost time next to Wind and Magic counters, timing reports frame timings you can quote. A session in which the engine rendered nothing is refused (refused: true, exit 1), never reported as zeros that read as fast |
tapir:perf_insight | The rows behind one insight of the last report |
tapir:perf_run, tapir:perf_compare, tapir:perf_campaign | Repeat a scenario from a clean start and write medians, judge one run against another, run a campaign of scenarios from cold starts |
tapir:perf_trace --out=trace.json | The last session as a Chrome Trace JSON for ui.perfetto.dev |
The tapir_* tools ride on the dowel MCP server, so the client config key is dowel. dart run tapir mcp:install writes the entry into .mcp.json: ./bin/dowel mcp:serve when the fast wrapper exists on a POSIX host, and dart run tapir mcp:serve otherwise (always on Windows, where ./bin/dowel is not used). Standard config for any client that reads .mcp.json:
{ "mcpServers": { "dowel": { "command": "./bin/dowel", "args": ["mcp:serve"], "cwd": "." } } }
| Client | Install |
|---|---|
| Claude Code | claude mcp add dowel -- ./bin/dowel mcp:serve, then /mcp reconnect dowel after a change |
| VS Code | code --add-mcp '{"name":"dowel","type":"stdio","command":"dart","args":["run","tapir","mcp:serve"]}' |
| Cursor | .cursor/mcp.json (project) or ~/.cursor/mcp.json (user) |
| Windsurf | ~/.codeium/windsurf/mcp_config.json |
| Goose, Warp | Paste the standard config into Goose (Advanced settings, Extensions, Add custom extension) or Warp (Settings, AI, Manage MCP Servers) |
| Claude Desktop | claude_desktop_config.json (macOS: ~/Library/Application Support/Claude/, Windows: %APPDATA%\Claude\) |
| Codex | `codex mcp add dowel ./bin/dowel